Commit Graph

244 Commits

Author SHA1 Message Date
Xiang Xiao
e1d3627bb1 sched/wdog: Change the default value of MAX_WDOGPARMS from 4 to 2
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
2020-08-06 10:36:22 -06:00
David Sidrane
ed5d00edd8 board_crashdump:use consistent type from outer function for file name 2020-08-04 21:20:05 -05:00
Gregory Nutt
d09f6aaa72 Correct more improper use of malloc(), zalloc(), and free()
malloc() and free() should never be used within the OS. This will work in the FLAT build because there is only a single heap, but will cause problems in PROTECTED and KERNEL build modes where there are separate heaps for user and kernel memory.

Typically kmm_malloc(), kmm_zalloc(), and kmm_free() should be called within the kernel in those build modes to use the kernel heap.

Memory is never free.  Possible memory leak:

    ./boards/arm/cxd56xx/common/src/cxd56_crashdump.c:  pdump = malloc(sizeof(fullcontext_t));

Memory allocated with malloc(), but freed with kmm_free():

    ./drivers/usbhost/usbhost_composite.c:  cfgbuffer = (FAR uint8_t *)malloc(CUSTOM_CONFIG_BUFSIZE);

Memory is never freed in these cases.  It is allocated in the driver initialization logic, but there is no corresponding uninitialization logic; memory is not freed on error conditions:

    ./arch/arm/src/lc823450/lc823450_i2s.c:  priv = (struct lc823450_i2s_s *)zalloc(sizeof(struct lc823450_i2s_s));
    ./arch/arm/src/sam34/sam_spi.c:  spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
    ./arch/arm/src/sama5/sam_spi.c:  spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));
    ./arch/arm/src/samv7/sam_spi.c:  spics = (struct sam_spics_s *)zalloc(sizeof(struct sam_spics_s));

Memory is allocated with zalloc() but freed on error conditions with kmm_free():

    ./arch/arm/src/sama5/sam_ssc.c:  priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
    ./arch/arm/src/samv7/sam_ssc.c:  priv = (struct sam_ssc_s *)zalloc(sizeof(struct sam_ssc_s));
    ./arch/arm/src/stm32/stm32_i2s.c:  priv = (struct stm32_i2s_s *)zalloc(sizeof(struct stm32_i2s_s));

Memory is never freed:

    ./drivers/spi/spi_bitbang.c:  priv = (FAR struct spi_bitbang_s *)zalloc(sizeof(struct spi_bitbang_s));
2020-08-04 20:41:43 +01:00
SPRESENSE
3befe16f52 drivers/video: Support JPEG format in VIDEO_CAPTURE
Add support for the VIDEO stream with JPEG frames supported by ISX012.
2020-07-31 09:37:20 +02:00
SPRESENSE
45e9c2c8f5 drivers/video: Add 3A parameter control
Provide functions which get and set the 3A (Auto white balance/Auto
exposure/Auto
focus) parameters.
These are achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS and
VIDIOC_S_EXT_CTRLS which have the following settings:

 1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
 2. id         = V4L2_CID_3A_PARAMETER

Also, provide function which get the 3A adjustment status.
This is achieved by the ioctl request codes VIDIOC_G_EXT_CTRLS which has the
following settings:

 1. ctrl_class = V4L2_CTRL_CLASS_CAMERA
 2. id         = V4L2_CID_3A_STATUS
2020-07-31 09:37:20 +02:00
SPRESENSE
28ba7f4a1e boards: cxd56xx: Fix bugs about ON/OFF control of AWB and AE
Fix the following three bugs about ON/OFF control of auto white balance and auto
exposure:

 - The returned value of VIDIOC_G_CTRL with id = V4L2_CID_AUTO_WHITE_BALANCE is
different from V4L2 specification.
 - Auto exposure is locked if auto white balance lock is requested.
 - Auto exposure and auto white balance are locked if auto exposure lock is
requested.
2020-07-31 09:37:20 +02:00
SPRESENSE
f1f0378d0a boards: cxd56_imageproc.c: Add alpha blend API
Add imageproc_alpha_blend() to blend two images in a specified ratio.

The blended source image is selectable from the following two types:

 - Single color image
 - YUV422 image

The blend ratio is selectable from the following three types:

 - Blend ratio with single value
 - Blend ratio with 1bpp
 - Blend ratio with 8bpp
2020-07-31 09:37:20 +02:00
SPRESENSE
8fec8cccfc boards: cxd56_imageproc.c: Add RGB565 -> YUV422 converter
Enable to interconvert between YUV422 and RGB565.
2020-07-31 09:37:20 +02:00
SPRESENSE
d560ce65ff cxd56xx: spresense: Add some improvements and fix bugs for Spresense board
- Add new functions of GNSS
- Support the lower PWM frequency
- Add CONFIG_CPUFREQ_RELEASE_LOCK
- Add high speed ADC support
- Add HPADC input gain configuration
- Add eMMC device
- Frame buffer support
- Fix SD/GNSS/sensor drivers not worked
- Build errors
- Fix nxstyle issues
2020-07-28 09:13:05 +02:00
SPRESENSE
500ead8101 drivers/modem/altair: Update altair modem driver
- Add board specific logic to altair modem dirver
- Fix issue that SPI4 RX frequency violated AC Spec
- Remove dummy buffer in altair driver
- Fix priority of SPI transfer task is too low
- Remove unnecessary configuration
- Modify timeout value for RX ready
- Fix minor bugs
2020-07-28 09:09:18 +02:00
Xiang Xiao
b329e2377d boards: Move toolchain related variables to Toolchain.defs
1.It make sense to let Toolchain.defs give the default value
2.The board can still change if the default isn't suitable
3.Avoid the same definition spread more than 200 Make.defs

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
2020-07-20 17:10:37 +01:00
Masayuki Ishikawa
4cf307584f boards: spresense: Remove CONFIG_SCHED_LPWORK=y from wifi/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-07-19 21:11:46 -05:00
Xiang Xiao
f5311de6b4 boards: Remove the unused ARCHCCVERSION and ARCHCCMAJOR
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I22d546693139c59c8c899479887a5f04d65edbd6
2020-07-16 11:03:53 -07:00
Xiang Xiao
ee875b2a26 boards: Move HOSTCC/HOSTCFLAGS to tools/Config.mk
Make.defs under board folder can still overwrite the default as needed

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1c300a8ace4b54d475ef8d398661ed65ca273a2e
2020-07-15 19:14:58 +01:00
Xiang Xiao
d32e9c38df boards: Move the C/C++ search path to the common place
so all boards support uClibc++/libc++ automatically

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ibe6fafbec57f7acb26ea6188a3e9923ea82295c5
2020-07-13 15:11:12 -03:00
Xiang Xiao
a62b45380b spresense:example_camera: Remove CONFIG_SYSTEM_NSH_CXXINITIALIZE
since it doesn't exist anymore

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-07-09 12:41:19 +09:00
Alin Jerpelea
5d0b93a0d9 boards: arm: cxd56xx: enable basic snapshot camera example
This camera example grabs a specified number of pictures
and saves them on the available storage

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-07-08 23:59:29 +01:00
Xiang Xiao
49020acfdc boards: Remove the unused CONFIG_xxx_CXXINITIALIZE=y
since cxx initialization is controlled by CONFIG_HAVE_CXXINITIALIZE now

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I39438dc3006d0a0b810052ecef50cd3c92f09d83
2020-07-01 10:41:37 -06:00
Alin Jerpelea
c6c0214f9a boards: arm: cxd56: initilize the video stream driver from the board
The video stream driver must be intialized from the board to comply with NuttX

NOTE:
Please remove the initalization from any camera example

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-06-15 08:10:49 +09:00
Masayuki Ishikawa
48dffbb2db boards: spresense: Add nxrecorder to wifi/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-06-10 20:17:09 -07:00
Masayuki Ishikawa
8ae0a13b36 boards: spresense: Change audio buffer size and mq size for wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-06-10 09:11:15 -03:00
Xiang Xiao
7a18ebe459 drivers/led: Extend userled_set_t from 8bits to 32bits
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5701b42ff930998198b1d915316cc4f2d085d4eb
2020-06-07 19:28:10 +01:00
Xiang Xiao
76965474ac drivers/led: Let board_userled_initialize return the led number
so the lower half driver don't need include the specific board.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf6638a6865bac42150b5957376e55909f041d40
2020-06-07 19:28:10 +01:00
Xiang Xiao
1b47aa1cb2 drivers/button: Let board_button_initialize return the button number
so the lower half driver don't need include the specific board.h

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2ff5c30049a5c5e8ee90baea56e9f4cb1a8a4f87
2020-06-07 19:28:10 +01:00
Gregory Nutt
1414c55c45 boards/arm: Leverage PR 1150 to other ARM Make.defs 2020-05-30 20:09:02 +01:00
Xiang Xiao
e83c1400b6 build: Move BOARD_DIR definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
Xiang Xiao
7e5b0f81e9 build: Replace -I with INCDIR
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 20:20:12 +01:00
Xiang Xiao
23668a4b9b build: Remove the empty variable assignment
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:24:13 -06:00
Xiang Xiao
edb0ce2d5a build: Don't need use $(DELIM) in include statement
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:24:13 -06:00
Xiang Xiao
dd61d3d9f9 build: Remve the unnecessary .gitignore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-23 18:00:40 +01:00
Masayuki Ishikawa
287b9f9c38 drivers: wireless: Add WPA2-PSK in AP mode for gs2200m
NOTE: By default, WPA2-PSK is used instead of WEP

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
2020-05-22 10:20:07 +02:00
Masayuki Ishikawa
76e216981e boards: spresense: Increase CONFIG_CXD56_AUDIO_NUM_BUFFERS for streaming
NOTE: http audio streaming is more stable now

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-21 12:46:10 +02:00
Xiang Xiao
1a95cce1a3 build: Move .config check to the top Makefile
remove the workaround to handle the inexistence of .config/Make.defs

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-20 17:57:34 +01:00
Masayuki Ishikawa
3fdbff3638 boards: spresense: Add nxplayer to rndis and wifi configs
NOTE: currently audio driver supports fs=48kHz only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-20 10:09:58 +02:00
Xiang Xiao
7faf3c0254 build: replace ${TOPDIR} with $(TOPDIR) in Makefile
make the usage consistence

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
567962bd62 build: Move the extension definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
8b42ee421a build: Move MKDEP definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Xiang Xiao
9ec9431706 build: Move DIRLINK/DIRUNLINK definition to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 19:23:18 +01:00
Masayuki Ishikawa
3387da6316 boards: spresense: Add ftpc to wifi/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-19 07:02:33 +02:00
Masayuki Ishikawa
bb39907b9c boards: spresense: Add ftpc and ftpd to rndis/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-19 07:02:33 +02:00
Xiang Xiao
5eae32577e build: Move INCDIROPT to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:02:55 -06:00
Xiang Xiao
bd656888f2 build: Replace WINTOOL with CYGWIN_WINTOOL Kconfig
so the correct value can be determinated by Kconfig system automatically

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:02:55 -06:00
Gregory Nutt
a569006fd8 sched/: Make more naming consistent
Rename various functions per the quidelines of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    nxsem_setprotocol -> nxsem_set_protocol
    nxsem_getprotocol -> nxsem_get_protocol
    nxsem_getvalue -> nxsem_get_value
2020-05-17 14:01:00 -03:00
Nathan Hartman
8d985819b3 Fix typos
Comments only. No functional changes.
2020-05-14 10:49:44 -06:00
Masayuki Ishikawa
0bd5dda2a3 boards: spresense: Remove CONFIG_EXAMPLES_FTPC=y to avoid compile error on CI
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>>
2020-05-14 14:17:47 +02:00
Masayuki Ishikawa
d2de9238a4 boards: spresense: Add support ftpc and ftpd to wifi/defconfig
NOTE: lpwork's priority has been changed from 30 to 60 to avoid an
error when calling getsockname() just after connect() in ftpc.c

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-14 14:17:47 +02:00
Masayuki Ishikawa
65b3accc51 boards: cxd56xx: Add SPI DMA support to cxd56_gs2200m.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-13 13:11:08 +02:00
Tobias Johansson
f2c957144a cxd56: Add input support to Spresense audio driver
Add recording support to the Nuttx audio driver for Spresense.
- Supports 16 bit data with 48 kHz sample rate only for now.
- Supports 1 (dual mono) 2 or 4 channels.
- Only analog mics have been tested so digital is considered
  unsupported.
2020-05-08 07:18:22 -06:00
Alan Carvalho de Assis
54d0256b9a Remove the not existent CONFIG_XXX_CMNVECTOR 2020-05-02 09:55:35 -06:00
Gregory Nutt
2aa85fd17e arch/arm, board/arm: Rename all up_* functions to arm_*
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private functions begin with the name of the architecture, not up_.

This PR addresses only these name changes for the ARM-private functions prototyped in arm_internal.h

This change to the files only modifies the name of called functions.  nxstyle fixes were made for all core architecture files.  However, there are well over 5000 additional complaints from MCU drivers and board logic that are unrelated to to this change but were affected by the name change.  It is not humanly possible to fix all of these.   I ask that this change be treated like other cosmetic changes that we have done which do not require full nxstyle compliance.

Impact

There should be not impact of this change (other that one step toward more consistent naming).
Testing

stm32f4discovery:netnsh
2020-05-01 18:28:13 +01:00
Gregory Nutt
037c9ea0a4 arch/arm: Rename all up_*.h files to arm_*.h
Summary

The naming standard at https://cwiki.apache.org/confluence/display/NUTTX/Naming+FAQ requires that all MCU-private files begin with the name of the architecture, not up_.

This PR addresses only these name changes for the up_*.h files.  There are only three, but almost 1680 files that include them:

    up_arch.h
    up_internal.h
    up_vfork.h

The only change to the files is from including up_arch.h to arm_arch.h (for example).

The entire job required to be compatible with that Naming Convention will also require changing the naming of the up_() functions that are used only within arch/arm and board/arm.

Impact

There should be not impact of this change (other that one step toward more consistent naming).

Testing

stm32f4discovery:netnsh
2020-05-01 03:43:44 +01:00
Gregory Nutt
6398a64e26 Rename up_saveusercontext to arm_saveusercontext 2020-04-30 22:09:51 +01:00
Masayuki Ishikawa
e479a97aec boards: spresense: Enable tcpblaster and udpblaster for wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-04-30 09:09:17 +02:00
Masayuki Ishikawa
1e47d60032 boards: spresense: Improve memcpy/memset performance for wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-04-30 09:09:17 +02:00
Xiang Xiao
2810220ea9 Update defconfig per refresh.sh report
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-20 07:07:32 -06:00
Xiang Xiao
2ec8f60e53 Run refresh.sh --silent all
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-18 07:17:38 -06:00
Xiang Xiao
3c4be8710c Fix typo in boards/arm/cxd56xx/drivers/camera/Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-18 07:17:38 -06:00
Alin Jerpelea
e899bc92d2 boards: cxd56: nxstyle fixes for the common code
nxstyle fixes on the cxd56 common code

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
efbd6ada21 boards: cxd56: spresense: nxstyle fixes
nxstyle fixes for the Sony Spresense board

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
f2a6d88c9d boards: cxd56: drivers: sensors: nxstyle fix
Nxstyle fix for the sensors drivers

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Alin Jerpelea
b4cab7eb9e boards: cxd56: drivers: camera: nxstyle fix
Nxstyle fix for the camera driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-17 09:25:56 -06:00
Ouss4
674ca92485 spresnese/audio_sdk: Add CONFIG_AUDIO to have a warning free build. 2020-04-16 19:10:45 -06:00
Alin Jerpelea
7396c2d47a boards: arm: cxd56: drivers: audio: nxstyle fixes
nxstyle fixes for cxd56 audio driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Tobias Johansson
5fb835b1df boards: cxd56: enable Nuttx audio driver
Adds an initial Nuttx audio driver supporting the Spresense CXD56.
Being a work in progress the driver has a number of limitations:
- Audio playback only, no recording yet.
- Only 16 bit stereo playback is supported.
- In practice only 48kHz playback is supported due to missing SRC.
2020-04-16 12:50:05 -06:00
Alin Jerpelea
50431e6694 boards: cxd56: spresense: add configuration for the NuttX audio driver driver
This configuration uses the NuttX audio driver

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Alin Jerpelea
c35fd3bb25 boards: cxd56: spresense: add configuration for SDK audio driver
This configuration uses the driver audio from SDK

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Alin Jerpelea
502d7bb501 boards: cxd56: spresense: move audio configuration
The audio configuration is board specific and shared by both audio drivers.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-16 12:50:05 -06:00
Xiang Xiao
df57cacd61 nuttx: Fix the nightly build warning again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-14 11:22:22 +02:00
Xiang Xiao
d3c4879113 Fix nxstyle warning
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-13 12:01:39 -06:00
Xiang Xiao
b22e3b9e28 nuttx: Fix the nightly build warning
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  142 |   .send              = spi_send,
      |                        ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')

In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  788 |                         (FAR const union ieee802154_attr_u *)&mode);
      |                                          ^~~~~~~~~~~~~~~~~

chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
 2104 |                       ntotal == (ssize_t)ret;
      |                       ~~~~~~~^~~~~~~~~~~~~~~

wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  579 |   type = bcmf_getle32(&event->type);
      |                       ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  580 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  619 |   status = bcmf_getle32(&event->status);
      |                         ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  620 |   escan_result_len = bcmf_getle32(&event->len);
      |                                   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
  166 |   event_id = bcmf_getle32(&event_msg->event.type);
      |                           ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  157 |   ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
      |   ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  239 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  244 |           ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |           ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  257 |       ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
      |       ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
  265 |   SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
      |   ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
   79 | begin_packed_struct struct sdio_resp_R5
      |                            ^~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
 2860 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
 3044 |   int ret;
      |       ^~~

chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
  722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
  727 |   ret = nxsem_wait(dev);
      |                    ^~~
      |                    |
      |                    struct gs2200m_dev_s *

.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE

platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
   69 | inline bool cxd56_audio_clock_is_enabled(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
   68 | inline void cxd56_audio_clock_disable(void);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
   67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
      |             ^~~~~~~~~~~~~~~~~~~~~~~~

chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
 1348 |   int ret;
      |       ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
 1496 |   int ret;
      |       ^~~

chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
  729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
  147 | #  warning OOK support is not complete, RX+TX doesn't work yet!
      |                                                    ^

str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
                                               'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
  435 |   .send              = spi_send,
      |                        ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')

chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
 static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
                        ^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
 static inline bool pic32mx_value(uint16_t pinset)
                    ^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
 static inline bool pic32mz_value(pinset_t pinset)
                    ^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
 pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
 ^

mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
       return ret;
       ^

In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
 static inline int read_partition_block(FAR struct partition_state_s *state,
                   ^

local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
 pollerr:
 ^~~~~~~

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
2020-04-13 12:01:39 -06:00
liuhaitao
459ad99373 Use EXTRAFLAGS instead of EXTRADEFINES to be used by make via command line
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.

Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-11 08:31:08 -06:00
Gregory Nutt
5c0e8e88b1 Revert "Makefile: move INCDIROPT to common place (#625)"
This reverts commit b9ace36fcc.

This change was added by PR 625 but has a serious logic flaw.  It removes all occurrences of INCDIROPT and replaces it with a definition in tools/Config.mk:

    else ifeq ($(WINTOOL),y)
      DEFINE = "$(TOPDIR)/tools/define.sh"
      INCDIR = "$(TOPDIR)/tools/incdir.sh" -w

This logic flaw is the Config.mk is included in all Make.defs files BEFORE WINTOOL is defined.  As a result, the definition is wrong in many places when building under Cygwin with a Windows native toolchain.
2020-03-26 08:50:29 -07:00
Xiang Xiao
b9ace36fcc
Makefile: move INCDIROPT to common place (#625) 2020-03-26 08:09:59 -06:00
Xiang Xiao
d2e6378322 Move CXD56_BINARY to boards/arm/cxd56xx/spresense/Kconfig 2020-03-23 19:19:40 +00:00
YAMAMOTO Takashi
1ffa009c8b Revert "Don't generate .depend anymore"
This reverts commit 79af7fbf4e.

Because:

* btashton reported some issues in local builds:

  https://github.com/apache/incubator-nuttx/pull/603#issuecomment-602264860

* this might be related to the current CI breakage:

  > /bin/sh: 1: /__w/incubator-nuttx/incubator-nuttx/nuttx/tools/mkdeps: not found
2020-03-22 23:07:29 -05:00
Xiang Xiao
79af7fbf4e
Don't generate .depend anymore 2020-03-22 18:15:29 +00:00
liuhaitao
c0e8afc531 cxd56xx: correct comment format in Make.defs to fix build break
Error log as below:
platform/camera/Make.defs:1: *** missing separator.  Stop.
2020-03-06 20:30:43 -06:00
Gregory Nutt
3ee1af5bcc Build System: Resolve CPU-specific logic in common build files
* tools/Config.mk - Add empty definition POSTBUILD
* tools/Makefile.unix/win - Replace CXD56xx specific logic with $(call POSTBUILD)
* boards/arm/cxd56xx/scripts/Config.mk - Add POSTBUILD definitions with logic removed from Makefile.unix/win
* boards/arm/cxd56xx/spresense/scripts/Make.defs - Include the CXD56xx Config.mk immediately after tools/Config.mk so that the empty POSTBUILD definition will be replaced with the correct one

NOTE: There is a precedent for this approach.  This is the way that other architecture-specific build options are implemented.  See, for example, tools/zds/Config.mk
2020-03-06 11:44:53 -06:00
Alin Jerpelea
94a73a8736 cxd56: add configuration for SPECIFIC_DRIVERS
The SPECIFIC_DRIVERS configuration was removed from the drivers Kconfig and
the build will ignore the specific drivers.
This patch enables the config locally for the CXD56 board

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-03-06 08:58:57 -06:00
Alin Jerpelea
34f274f9c0 cxd56: move ISX012 camera sensor driver
This sensor driver needs rework to match the needed layout for standar NuttX driver.
In the meantime it is moved to board specific sensors to fix the violation.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-03-06 08:58:57 -06:00
Masayuki Ishikawa
860e07317c boards: spresense: Remove CONFIG_NET_LOCAL=y from wifi/defconfig
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-28 09:54:04 +01:00
Masayuki Ishikawa
b48e0a6e55 boards: spresense: Change CONFIG_FAT_MAXFNAME and CONFIG_NAME_MAX
CONFIG_FAT_MAXFNAME is set to 255 and CONFIG_NAME_MAX is set to 765
which can support max file name including Japanese characters.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-27 08:58:08 +01:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
Masayuki Ishikawa
9909b7636c boards: spresense: Add CONFIG_NSH_FILE_APPS=y to rndis and wifi configs
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-20 08:49:23 +01:00
Masayuki Ishikawa
edb38ee53a boards: spresense: Update README.txt
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-06 09:21:51 +01:00
Masayuki Ishikawa
c19ac7da25 boards: spresense: Add module configuration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-06 09:21:51 +01:00
Masayuki Ishikawa
542df2f80a boards: spresense: Fix LDMODULEFLAGS in Make.defs
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-06 09:21:51 +01:00
Masayuki Ishikawa
3704f0f5cc boards: spresense: Update README.txt
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
2020-02-05 08:55:48 +01:00
Masayuki Ishikawa
d430be293f boards: spresense: Add elf configuration
NOTE: you need to apply another PR to apps to avoid crash in task test

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-05 08:55:48 +01:00
Masayuki Ishikawa
99c6f96a9c boards: spresense: Add strip option to Make.defs
This option is needed to retain symbol tables in elf files

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-05 08:55:48 +01:00
Xiang Xiao
5c80b94820 Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
Xiang Xiao
80277d1630
Refine the preprocessor conditional guard style (#190) 2020-01-31 19:07:39 +01:00
Xiang Xiao
68951e8d72 Remove exra whitespace from files (#189)
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Masayuki Ishikawa
5a24d499cf boards: spresense: Add posix_spawn configuration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-01-30 09:22:21 +01:00
Xiang Xiao
540e947c0c Run ./tools/refresh.sh --silent all 2020-01-22 20:47:18 -06:00
WaterBirdWayOrigin
d360205d07 boards/arm/cxd56xx/spresense/configs/rndis/defconfig: Set CONFIG_NET_ETH_PKTSIZE to 1514 (#110) 2020-01-16 20:59:42 +01:00
Nathan Hartman
d1dd2841c5 Fix typos in comments and README.txt.
No functional changes.
2020-01-15 10:09:34 -06:00
Masayuki Ishikawa
097986143c boards: spresense: Update README.txt regarding SMP
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-01-15 17:08:09 +09:00
patacongo
f00569816f Fix a few errors concerning use of section block comments in .c files: (#95)
1. No .c file should include a "Public Types" section.  Only a header file can define a public type.  A .c file can only define a private type.  Several files contained private type definitions.  The section that they were defined in, however, was incorrectly named "Public Types."  Those were easilty changed to "Private Types" which is what they are.

2. No .c file should include a "Public Function Prototypes" section.  All global function prototypes should be provided via a header file and never declared with a .c file.

For No. 2, I corrected as many cases as was reasonable for the time that I had available.  But there are still a dozen or so .c files that declare "Public Function Prototypes" within a .c file.  This is bad programming style.  These declarations should all be moved to the proper header files.
2020-01-14 00:37:54 +01:00
Gregory Nutt
9803ce9408 boards/arm/cxd56xx/drivers/audio/cxd56_audio_bca_reg.c: Fails to compile
This function fails to compile due to numerous undeclared register definitions used in cxd56_audio_bca_reg.c.  This commit replaces the undefined definitions with very similar definitions recommended by GCC (differing only in some spelling).

However, I cannot be certain that this is correct.  This must be reviewed, corrected, and verified by Alin Jerpelea.  Please do not merge until Alin approves.

The configuration that demonstrates the failure is spresense:audio.
2020-01-09 07:22:55 -03:00
Gregory Nutt
edfcbc0840 boards/arm/cxd56xx/drivers/audio: Missing commas in in enumeration. Fix compilation error found in build testing due to missing commas in an enumeration type. Correct ordering of definitions and section block comments to follow coding standard. 2020-01-08 14:54:10 -03:00
Alin Jerpelea
3e45517599 Fix buffer overrun and memory leak on smartfs and improvement to cxd56xx
Author: Alan Carvalho de Assis <acassis@gmail.com>

    Check all .c and .h against nxstyle and fix it.

Author: Alin Jerpelea <alin.jerpelea@sony.com>

    fs: smartfs: Fix over capacity write

    When the remaining capacity of flash is one sector, if a new root
    directory is created by file open, then the root directory's chain is
    broken and it causes to SmartFS filesystem crash. Once this fatal
    problem occurs, it's impossible to recover even if the system reboot.
    Fix it by finally update link of root directory.

    fs: smartfs: Fix buffer overrun

    fs: smartfs: Fix uninitialized variable warnings

    fs: smartfs: Memory leak fix

    boards: cxd56xx: Update spresense board.h

    - Fix PMIC assignment
    - Add specific pin configurations for spresense
    - Remove unnecessary definitions

    arch: cxd56xx: Add ITM syslog init at startup

    arch: cxd56xx: Enable DMA settings dynamically
2020-01-08 07:51:11 -03:00
Alin Jerpelea
15eddd29c8 cxd56xx improvements (#48) and various other fixes (#49)
Author: Alan Carvalho de Assis <acassis@gmail.com>

    Verify all .c and .h against nxstyle, fixed the Mixed cases

Author: Alin Jerpelea <alin.jerpelea@sony.com>

    cxd56xx improvements (#48)

    * arch: cxd56xx: Add size limitation for I2C SCU xfer

    This is a fw restriction, unroll loop because it can be transfer
    up to 16 bytes.

    * arch: cxd56xx: Fix lack of leave_critical_section

    add the missing leave_critical_section

    * arch: cxd56xx: Remove unnecessary file

    this header is duplicate and we can remove it

    * arch: cxd56xx: Cosmetic change

    remove space after function

    * arch: cxd56xx: update topreg registers

    the topreg registers are updated to match the cxd5602 HW

    * arch: cxd56xx: Add voltage setting for low battery notification

    Add voltage setting for low battery notification

    * arch: cxd56xx: Improve perfomance of SD card

    Improve a problem that the clock of SD Host Controller is lower than the
    expected value in SDR25 transfer mode.

    * arch: cxd56xx: Cosmetic changes

    cleanup to comply with coding standard

    * boards: cxd56xx: Cosmetic changes

    updates to comply with coding standard

    * boards: cxd56xx: Fix SD card cannot mount issue

    SD card cannot mount when connecting and disconnecting three times
    or more due to wrong state of parameter 'initialized'.

    This change enables to skip swtching initialized state when mount
    failed.
2020-01-07 18:29:52 -03:00
Alin Jerpelea
077ef70b0c cxd56xx improvements (#48)
* arch: cxd56xx: Add size limitation for I2C SCU xfer

This is a fw restriction, unroll loop because it can be transfer
up to 16 bytes.

* arch: cxd56xx: Fix lack of leave_critical_section

add the missing leave_critical_section

* arch: cxd56xx: Remove unnecessary file

this header is duplicate and we can remove it

* arch: cxd56xx: Cosmetic change

remove space after function

* arch: cxd56xx: update topreg registers

the topreg registers are updated to match the cxd5602 HW

* arch: cxd56xx: Add voltage setting for low battery notification

Add voltage setting for low battery notification

* arch: cxd56xx: Improve perfomance of SD card

Improve a problem that the clock of SD Host Controller is lower than the
expected value in SDR25 transfer mode.

* arch: cxd56xx: Cosmetic changes

cleanup to comply with coding standard

* boards: cxd56xx: Cosmetic changes

updates to comply with coding standard

* boards: cxd56xx: Fix SD card cannot mount issue

SD card cannot mount when connecting and disconnecting three times
or more due to wrong state of parameter 'initialized'.

This change enables to skip swtching initialized state when mount
failed.
2020-01-07 11:21:58 -03:00
Xiang Xiao
91d483591d drivers/modem/altair/altmdm_sys.c: Fix modem/altair semaphore related compiler warning 2020-01-02 20:37:48 -06:00
Xiang Xiao
6a3c2aded6 Fix wait loop and void cast (#24)
* Simplify EINTR/ECANCEL error handling

1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx

* Unify the void cast usage

1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
2020-01-02 10:54:43 -06:00
Masayuki Ishikawa
200770915e Merged in masayuki2009/nuttx.nuttx/spresense_with_elf (pull request #1082)
boards: spresense: rndis and wifi configurations support elf

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-12-02 14:22:27 +00:00
Gregory Nutt
03e41c6806 boards/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 17:47:03 -06:00
Alin Jerpelea
516945d97e boards/arm/cxd56xx/spresense/configs/lte/defconfig: Select CONFIG_MODEM_ALTMDM. 2019-11-04 07:18:18 -06:00
Alin Jerpelea
2be1153030 Merged in alinjerpelea/nuttx (pull request #1061)
boards: cxd56xx: spresense: cleanup and new defconfig

* arch: cxd56xx: remove NVIC_SYSH redefinition

    The NVIC_SYSH is already defined in nvicpri.h

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: enable SPRESENSE_EXTENSION

    Enable high current mode for the Spresense Extension board on all examples
    that have SDCARD support

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: ifdef SDCARD_TXS02612

    The SD Card TXS02612 port expander is hosted on the Extension board and
    should not be enabled if the extension board is not prezent.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: increase MQ_MAXMSGSIZE

    This change is needed by the display driver on spresense platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: config: add lcd examples defconfig

    This is a configuration for the basic nx examples

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-24 14:26:02 +00:00
Alin Jerpelea
e2d2eba445 Merged in alinjerpelea/nuttx (pull request #1060)
Master

* boards: cxd56xx: spresense: add Spresense Image Processor

     Enable support for accelerated format convertor, rotation and so on.
    using the CXD5602 image processing accelerator.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards:cxd56xx:spresense: initalize GNSS and GEOFENCE at boot

    Add the optional initialization of  GNSS and GEOFENCE at boot
    if the drivers are enabled

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-23 14:43:45 +00:00
Alin Jerpelea
f7af996f1d Merged in alinjerpelea/nuttx (pull request #1059)
boards: cxd56xx: spresense: add board_timerhook function

* boards: cxd56xx: spresense: add board_timerhook function

    in preparation for SDK we muts have a weak board_timerhook function

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: usbhost: add missing endif

    By accident an endif was missing.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: audio: add build barrier

    The audio implementation should not be beuilt if the config
    CONFIG_CXD56_AUDIO is not set.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch:arm:cxd56xx: add ge2d.h header

    The header is used by imageproc.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-23 13:12:21 +00:00
Gregory Nutt
230c80b8e1 Cosmetic changes from review of last PR. 2019-10-21 08:51:47 -06:00
Alin Jerpelea
07f9154e5b Merged in alinjerpelea/nuttx (pull request #1056)
boards: cxd56xx: add board support for LTE modem and modem driver

* drivers: modem: add altair modem driver

    Add modem driver for the altair modem

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add board support for LTE modem

    Add the Altair LTE modem support on the Spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: add LTE defconfig

    Add the Altair LTE modem defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-21 14:14:33 +00:00
Alin Jerpelea
13c25a310b Merged in alinjerpelea/nuttx (pull request #1054)
boards: spresense: audio: add missing header

Add the missing header to silence compiler warnings

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-18 12:51:15 +00:00
Masayuki Ishikawa
2c16d756cc Merged in masayuki2009/nuttx.nuttx/gs2200m_with_reset (pull request #1050)
Gs2200m with reset

* include: wireless: Add reset handler to struct gs2200m_lower_s

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* drivers: wireless: Add reset and unreset sequence in gs2200m.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: cxd56xx: Add reset handler to cxd56_gs2200m.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-15 21:03:33 +00:00
Gregory Nutt
eeff429939 Fix some trivial spacing issues noted in review of PR. 2019-10-11 23:52:15 +08:00
Alin Jerpelea
716c7c9bee Merged in alinjerpelea/nuttx (pull request #1048)
boards: arm: cxd56xx: audio: add power_control and audio_tone_generator

* boards: arm: cxd56xx: audio: add power_control

    Add a simeple way to control the audio power for userspace apps

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: audio: add audio_tone_generator

    Add a simple way to control the audio buzzer with defined frequency
    for userspace apps

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-11 15:46:15 +00:00
Alin Jerpelea
33d0de4d57 Merged in alinjerpelea/nuttx (pull request #1046)
boards: spresense: add audio implementation

* boards: arm: cxd56xx: add audio implementation

    Add the board audio control implemantation

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: update audio defconfig

    Small updates to build the platforms specific audio driver

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: drivers: add audio implementation

    Add the audio implementation for CXD56XX chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: fix Load switch GPIO

    During the initial bringup the grong GPIO was set.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-09 23:55:20 +00:00
Alin Jerpelea
60814806a4 Merged in alinjerpelea/nuttx (pull request #1045)
boards: arm: cxd56xx: different updates

* boards: cxd56xx: spresense: initialize SCU at boot

    The SCU has to be initialized at bootup on spresense board because several
    functions depend on it.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: add audio control definitions

    Add audio control definitions for the audio implementation.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: add audio defconfig

    Add defconfig for the audio implementation

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-08 16:23:58 +00:00
Masayuki Ishikawa
193698c89c Merged in masayuki2009/nuttx.nuttx/fix_untracked_files (pull request #1042)
boards: cxd56xx: common: Add .gitignore not to show untracked files.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 13:08:04 +00:00
Masayuki Ishikawa
4c53f0d232 Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041)
Spresense smp

* arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c

    NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Add support for SMP

    NOTE: To run cxd56xx in SMP mode, new boot loader which will be
    released later must be used.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c

    NOTE: In cxd56xx, each external interrupt controller can be
    accessed from a local APP_DSP (Cortex-M4F) only. This commit
    supports IRQ routing for SMP by calling up_send_irqreq() in
    both up_enable_irq() and up_disable_irq().

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Add smp configuration

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 13:06:21 +00:00
Masayuki Ishikawa
30021c4dee Merged in masayuki2009/nuttx.nuttx/add_gc_sections (pull request #1040)
boards: spresense: Add --gc-sections to LDFLAGS in scripts/Make.defs

Also, add -ffunction-sections -fdata-sections to ARCHCFLAGS

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-01 12:03:54 +00:00
Masayuki Ishikawa
9673debe2b Merged in masayuki2009/nuttx.nuttx/fix_cxd56_ostest (pull request #1039)
fix_cxd56_ostest

* boards: spresense: Fix config names in cxd56_ostest.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Enable ostest in rndis/defconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Enable ostest in wifi/defconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-01 03:24:55 +00:00
Nathan Hartman
46aaec7ba0 Fix minor typos in docs and comments. 2019-09-29 12:52:20 -06:00
Alin Jerpelea
7420f4dc5e Merged in alinjerpelea/nuttx (pull request #1038)
cxd56xx: various fixes

* arch: arm: cxd56xx: Support to set any i2c frequency

    This commit supports to be able to set the i2c frequency other than just
    100 or 400 Hz.

* arch: arm: cxd56xx: Enable SD clock during access to SD card

    - Improve GNSS low sensitivity with SD card inserted
    - Reduce power consumption by stopping SD clock

* arch: arm: cxd56xx: Do PANIC() when cpu rx fifo is overflow

    If CPU Rx FIFO is overflow, it's fatal error for system. In such a case,
    this commit changes to allow the user to notice by calling PANIC() for
    debuggability enhancement.

* arch: arm: cxd56xx: Fix compile error in sdhci debug code

* arch: arm: cxd56xx: Remove assertion in cpu tx queue

    When CPU Tx queue is overflow, it returns -EAGAIN instead of assertion
    to be able to retry.

* arch: arm: cxd56xx: Add configurations for cpu fifo elements

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Fix LPADC configuration

    LPADC options defined in the same symbol name, so kconfig tool
    couldn't process them correctly.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Update loader and gnssfw ver.17660

* arch: arm: cxd56xx: Fix hang-up when error interrupt occurs

    Fix a problem that error interrupts are not cleared.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Fix sdhci semaphore

    Fix inital value of semaphore in sdhci drive.r

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: Treat the initial value of LNA power as off

    LNA is always turned power on when GNSS is started. So it is desirable
    that the initial value of the LNA power is off by default.

* boards: cxd56xx: Remove initial setting of PIN_AP_CLK

    PIN_AP_CLK is used as a port selector of SDIO expander on the extension
    board, and is set output low in initalizing. Therefore, this pin cannot
    be used for other board. To avoid this restriction, remove this initial
    operation because this pin is pulled down by default on the extension
    board.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-26 11:28:26 +00:00
Alin Jerpelea
54ef3efc35 Merged in alinjerpelea/nuttx (pull request #1033)
boards: spresense: Add board initialization for isx012

Add isx012 initialization to the board and include the needed headers

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-18 11:42:35 +00:00
Alin Jerpelea
b55c518a1a Merged in alinjerpelea/nuttx (pull request #1031)
boards: spresense: add isx012 camera initialization and config

* boards: spresense: add isx012 camera initialization

    Add the initialization for the isx012 camera sensor.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: spresense: add camera defconfig

    For easy configuration add camera defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-17 16:58:09 +00:00
Gregory Nutt
8d87e624bf boards/arm/cxd56xx/spresense/Kconfig: Add a configuration to select if an extension board is attached to the SPresence. If there is no extension board attached, the SPresense may run in a low-power mode by default (as determined by the CONFIG_CXD56_CUSTOM_PINCONFIG option). If an extension board is present, then the SPresense will need to run at a higher power mode, selected by the new CONFIG_SPRESENSE_EXTENSION option. 2019-09-17 05:41:10 -06:00
Takayoshi Koizumi
ef28729374 boards/arm/cxd56xx/spresense/include/board_pinconfig.h: Add board specific pin configurations of CXD5602 pins to fit Spresense board. 2019-09-16 15:32:58 -06:00
Gregory Nutt
66a55c91e7 Linker scripts: Fix some alignment problems. 2019-09-15 18:06:36 -06:00
Gregory Nutt
2925c28f8f All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces. 2019-09-15 17:22:16 -06:00
Gregory Nutt
0bd60c3722 All linker scripts: Preface all _ebss defininitions with . = ALIGN(4). Otherwise, the last bytes in the .bss section will not be initialized properly. Also convert all linker scripts that use TABs to spaces. 2019-09-15 15:27:58 -06:00
Augusto Fraga Giachero
68bbc8438c drivers/timers/pwm.c: Move the pwm/pwm.c driver to timers/pwm.c, The drivers/pwm contained only one .c file (pwm.c), so to avoid the proliferation of sub-directories inside drivers/ is better to move the pwm.c driver to drivers/timers. The pwm.h header was moved to include/nuttx/timers to keep consistency, so all files referencing it need to be updated. 2019-09-02 07:57:10 -06:00
Gregory Nutt
85770966ff boards/Board.mk: Add support to pass dependency paths. boards/arm/cxd56xx/common/Makefile: Add correct dependency paths for board/ and src/ subdirectories. 2019-09-01 12:19:36 -06:00
Alin Jerpelea
3806a01c5d Merged in alinjerpelea/nuttx (pull request #1024)
noards: arm: cxd56xx: migrate common code

* boards: arm: cxd56xx: common: move boot to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move flash to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move I2C driver to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move uid to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move usbmsc to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add SPH

    The SPH is used by the ASMP implementation from the SDK.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-26 14:29:55 +00:00
Alin Jerpelea
6ecee7e403 Merged in alinjerpelea/nuttx (pull request #1021)
boards: cxd56xx: add SCU sensors (2/2)

* boards: cxd56xx: add cxd56_bh1721fvc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bh1745nuc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1383glv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1422gmv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmp280 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_kx022 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_lt1pa01 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_rpr0521rs initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_sensors initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add Backup Log driver

    The driver will be used to backup logs on crash.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: add crashlog driver

    Add Crashlog driver with support for reset on crash

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move gs2200m initialization

    Move the board gs2200m initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move ili9340 initialization

    Move the board ili9340 initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move lpm013m091a initialization

    Move the board lpm013m091a initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: typo fixes

    HEADER: Updates on file location
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-23 13:28:35 +00:00
Alin Jerpelea
d6366c1e82 Merged in alinjerpelea/nuttx (pull request #1019)
Add the sensor initialization for cxd56xx boards in the common board folder

* boards: cxd56xx: apds9930: typo fix

    fix apds9930 typos

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_ak09912 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: move cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9930 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9960 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-22 13:55:35 +00:00
Alin Jerpelea
a91d86523c Merged in alinjerpelea/nuttx (pull request #1018)
boards: cxd56xx: add SCU sensors

* drivers: platform: add Avago APDS9930 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1721FVC Ambient Light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1745NUC Color Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1383GLV/BM1383AGLV Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1422GMV/BM1422AGMV Magnetic Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMI160 Sensor support

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMP280 Barometic Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Kionix KX022/KX122 Acceleration Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Murata LT1PA01 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm RPR0521RS Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: sensors: bmi160: add optional I2C address

    Add a menu option for the case when the SDO pin is pulled to VDDIO

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-22 12:49:05 +00:00
Alin Jerpelea
3ed844640d Merged in alinjerpelea/nuttx (pull request #1015)
tools: unix: add support for common board folder

* tools: unix: add support for common board folder

    this patch adds support for a common board folder and simplifies the code
    and maintenance on boards that share the same code

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cxd56xx: migration to a common folder

    This is the first platform to be migrated to the new common folder
    structure.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-21 17:25:16 +00:00
Alin Jerpelea
c6355f58d6 Merged in alinjerpelea/nuttx (pull request #1014)
boards: add stub drivers folder for later use

* boards: add stub drivers folder for later use

    The board/drivers folder is added for future use.

    In this folder we should place drives that are platform specific and
    depend on HW that is present only on a specific platform.

    NOTE: All shared drivers should go to the regular driver folder
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: shift BOARD_DIR one level up

    In preparation for drivers and common folders we are moving the
    BOARD_DIR path up one level.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: add drivers/platform symlink

    Link the boards/<arch>/<chip>/drivers dir to drivers/platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: add platform specifc drivers extension

    There are platforms that use specific drivers and we should be able to
    include those drivers in the build

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* board: cxd56xx: drivers: add AK09912 driver for SCU

    This is a platform specific driver connected on the SCU unit.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-21 13:39:29 +00:00
Alin Jerpelea
f362d161db Merged in alinjerpelea/nuttx (pull request #990)
arm: codestyle fixes 1

* arm: a1x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: am335x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: c5471: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: cxd56xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: dm320: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: efm32: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imx6: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imxrt: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: kinetis: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-12 16:06:40 +00:00
Alin Jerpelea
1358e829ad Merged in alinjerpelea/nuttx (pull request #967)
group boards based on chip

* a1x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* am335x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* scx56xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dm320: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imx6: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kinetis: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kl: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc17xx_40xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc214x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc2378: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc31xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc43xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc54xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max326xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxart: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nuc1xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam34: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd2l2: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd5e5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f0l0g0: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32h7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* str71x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tiva: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: typo fix

    this boars is a z80 board and was moved to the wrong arch

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at32uc3: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at90usb: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: atmega: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: mcs92s12ne64: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mz: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: lm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: mor1kx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: m32262f8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: sh7032: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: gap8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: nr5m100: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: sim: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: qemu: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: esp32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: z16f2811: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: ez80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z180: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: update tools for boards based on chip

    This patch updates only the linux tools

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl25z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl26z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcb1700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-evb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same71-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-1152re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzou: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f071rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c123g-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c1294-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: typo fix

    add missing tools/oocd.sh

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-07 20:49:39 +00:00