1. Wake up tx if there is data alreay to sent after rx update
2. Try tx queue again after every data frame sent
iperf test:
```
TCP RX 4M->16M
TCP TX 2M->14M
UDP RX 18M->26M
UDP TX 2M->18M
```
Signed-off-by: chao.an <anchao@xiaomi.com>
added an option to load nvram from file system, which will help developers
easily to tuning the firmware parameters without compile firmware.
Signed-off-by: chao.an <anchao@xiaomi.com>
some SDIO device will return the larger frames out of bound
error log:
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
bcmf_sdpcm_readframe: Frame is too large, cancel 1544 1536
Signed-off-by: chao.an <anchao@xiaomi.com>
since the code could map the unsupported work to the
supported one and remove select SCHED_WORKQUEUE from
Kconfig since SCHED_[L|H]PWORK already do the selection
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
wireless/gs2200m.c: In function 'gs2200m_send_cmd':
Error: wireless/gs2200m.c:1555:32: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
1555 | memset(pkt_dat, 0, sizeof(pkt_dat));
| ^
Error: wireless/gs2200m.c:1570:36: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
1570 | memset(pkt_dat, 0, sizeof(pkt_dat));
| ^
wireless/gs2200m.c: In function 'gs2200m_ioctl':
Error: wireless/gs2200m.c:318:25: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
318 | snprintf(str, 5, "%04d", num);
| ^
wireless/gs2200m.c:318:3: note: 'snprintf' output between 5 and 6 bytes into a destination of size 5
318 | snprintf(str, 5, "%04d", num);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I received an issue report that multiwebcam in Spresense SDK 2.4.0
has a problem with the Chrome browser
- Actually, the browser tries to establish 2 connections but
the multiwebcam can handle only 1 connection. And if accept() for
the second connection is delayed, the connection no longer exists
in the gs2200m hardware
- This commit fixes this issue by checking if the cid is valid or not.
Impact:
- gs2200m driver only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
warning: ISO C forbids 'return' with expression, in function returning void [-Wpedantic]
warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'uint8_t * {aka unsigned char *}' [-Wformat=]
warning: too many arguments for format [-Wformat-extra-args]
on bcmf_netdev_notify_tx_done events
that provoked massive TCP spurious retransmissions;
bcm43xxx: fixed an issue with sporadic stalls of TX poll timer.
Also I have set the parameter to 8 instead of 4 by default
because there were many "alloc failed" messages in debug log
even during initialization / automatic IP address assignment
via DHCP negotiation.
Verge Aero has submitted the SGA
Anthony Merlino has submitted the SGA
Gregory Nutt has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Those files are ported from the Intel/Zephyr
arduino101_firmware_source-v1.tar package
where the code was released with a compatible 3-clause BSD license
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
We found that the change caused a problem when running a VPN application.
and also confirmed that reverting the commit fixed the issue.
This reverts commit 11a842333f.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I noticed that the ntpclient does not work with gs2200m
- Finally, I found that the address family for recvfrom() is not
set correctly
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with ntpclient
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
