Previously NuttX runs on little core of K230, this patch allows NuttX to
run on the big core as well.
Within folder `arch/risc-v/src/k230`:
- Changes:
- CMakeLists.txt add k230_hart.c to sources list
- Make.defs add k230_hart.c to sources list
- chip.h add inclusion to k230_hart.h etc
- k230_irq.c move sbi_late_init() to k230_hart.c
- k230_start.c add support to run on big core
- hardware/:
- k230_memorymap.h add T-Head C908 specific CSR
- Additions:
- k230_hart.c sbi_late_init w/ hart initialization
- k230_hart.h header file
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
add defintions for vector extension and additional user-mode
extension fields for MSTATUS and SSTATUS registers.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Adding CMakeLists.txt files to support CMake build system.
Note that only FLAT build works now due to limitations of current
CMake build system.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
SAMA5D2 has UART (TX/RX only) and FLEXCOM USART (with control pins).
UART has only TX/RX, so if I try to use flow control with FLEXCOM USART,
there is no register definition on the UART side and get a compilation error.
Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
Commit 03e5c02 introduced option to have both standard SPI and QSPI
in SPI mode on one system. However this change broke the appearance of
QSPI driver configuration menu entry in menuconfig as it was dependent
on !SAMV7_QSPI_IS_SPI (which is now true for all MCUs having standard
SPI ability in QSPI driver).
This change makes sure the menu is correctly shown when QSPI driver
used.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds support for creating an early frame buffer and primatives for
writing to this frame buffer as a console. This does require the font
infrastructure as well as multiboot2.
Additionally this can now be used with a UEFI bootloader long as it
boots NuttX via Multiboot2. There does seem to be a PCI interrupt
issue when running in UEFI mode.
I was able to boot my laptop using this and see PCI devices enumerate.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
x86_64: Add conditionals around the multiboot framebuffer
Squashed commits:
1. Porting prior PCI work in place of jailhouse code
At this point the PCI enumeration works for x86_64 including over
pci-pci bridges.
Running QEMU with this configuration we see the bridge and the
device on the bridge. It also detected the qemu test device
qemu-system-x86_64 \
-cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \
--enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \
-device pci-testdev \
-device pci-bridge,id=bridge0,chassis_nr=2 \
-device e1000,bus=bridge0,addr=0x3
qemu_pci_init: Initializing PCI Bus
pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002
pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000
pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003
pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002
pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000
pci_probe_device: [00:04.0] Probing
pci_check_pci_bridge: [00:05.0] Found Bridge
pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000
2. Remove unused CONFIG_PCI_MAX_BDF option
3. Add a workaround for Jailhouse pci scanning
4. Extend BAR parsing and handle PIO and MMIO for pci-testdev
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
5. PCI: Add initial support for QEMU 'edu' test device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
6. Bring up PCI later in boot process
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
7. Add ISR and DMA support to QEMU edu test pci device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
8. Fix bad function prototype definition in qemu_edu
9. intel64: Add a pci test configuration and instructions
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
10. PCI: Fix issue in identification of 64bit bar
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Squashed commits:
1. x86_64: qemu: implement pci-e functions and enumerate pci-e devices on boot
2. virt: add qemu pci-testdev driver
3. pcie: types array should be null terminated
4. pcie: enable don't take flags, hardcoded enabling flags
5. pcie: checking bar > 4 for 64bit bars are sufficient
6. pcie: qemu: remove not used header
7. pcie: qemu: return -EINVAL if buffer argument is NULL
8. pcie: make pcie enumerate routine as common instead of architecture dependent
9. pcie: cosmetic changes to fit check tools
10. pcie: create MSI/MSIX related marcos and simplify the msi/msix routines
After warm reset the interrupt source in the HW block is not explicitly
cleared, thus once the interrupt source is enabled the old / stale interrupt
fires immediately.
This causes a DEBUGASSERT() failure on line 808 mpfs_spi_unload_rx_fifo:
DEBUGASSERT(nwords > 0);
This commit fixes building native MCUboot from sources by getting
the required sources from `esp-hal-3rdparty` repository and enable
building MCUboot and using it as the 2nd stage bootlaoder.
- A pre-built IDF bootloader is used by default;
- `ESP32C3_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32C3_PARTITION_TABLE.
- A pre-built IDF bootloader is used by default;
- `ESP32S3_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S3_PARTITION_TABLE.
- A pre-built IDF bootloader is used by default;
- `ESP32S2_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S2_PARTITION_TABLE.
- A pre-built IDF bootloader is used by default;
- `ESP32_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32_PARTITION_TABLE.
Simple boot is a method of booting that doesn't depend on a 2nd
stage bootloader. Please note that some of the ESP-IDF bootloader
features are not available using simple boot, such as partition
tables and OTA: most of these features are implemented in NuttX
and MCUboot.
- spi/slave.h: revise comments in pulic types section
- doc/sim.rst: minor formatting, add ways to escape cu
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This commit refactors DAC driver. The functionality remains the same
but driver start up is now done in dac_setup (after application called
open function) instead of sam_dac_initialize (called from BSP). This
ensures that driver does not take resources (timer, interrupt) until
opened. Implementation of dac_shutdown is also provided, therefore
the driver frees resources once closed.
This change is consistent with other drivers implementation.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
USART peripheral can work in SPI mode as well. This commit adds support
for such functionality. Only 1 slave device is supported by the
peripheral therefore board level does not have to ensure correct CS
setup.
The usage of the peripheral is the same as with other SPI drivers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds basic support for iC-JX expander in SPI mode. The
expander is functional and supports both input and output pins. Further
expander functionalities (filtering, adc, interrupt support) are not
yet implemented.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also makes this bootloader configuration as default
for esp32c3-generic target and removes the need for running
'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
Ox64 BL808 crashes with a Page Fault when we run `getprime` then `hello`. This is caused by the T-Head C906 MMU incorrectly accessing the MMU Page Tables of the Previous Process (`getprime`) while starting the New Process (`hello`).
To fix the problem, this PR flushes the MMU Cache whenever we point the MMU SATP Register to the New Page Tables. We execute 2 RISC-V Instructions that are specific to T-Head C906:
- DCACHE.IALL: Invalidate all Page Table Entries in the D-Cache
- SYNC.S: Ensure that all Cache Operations are completed
This is derived from the T-Head Errata for Linux Kernel. More details here: https://lupyuen.github.io/articles/mmu#appendix-flush-the-mmu-cache-for-t-head-c906
Modified Files:
- `arch/risc-v/src/common/riscv_mmu.h`: If needed, `mmu_write_satp()` calls `mmu_flush_cache()` (weak function) to flush the MMU Cache. (Like for T-Head C906)
- `arch/risc-v/src/bl808/bl808_mm_init.c`: Flush the MMU Cache for T-Head C906. Extend `mmuflags` from 32-bit to 64-bit to be consistent with `mmu_ln_setentry()`.
- `boards/risc-v/bl808/ox64/configs/nsh/defconfig`: Enable `ostest` in the Build Config. Update `CONFIG_BOARD_LOOPSPERMSEC` according to `calib_udelay`.
Ubuntu stock toolchain `gcc-riscv64-unknown-elf` complains about
current CMake system (see issue#11573). This tries to fix it so
that both newer XPack and stock toolchains can be used with CMake.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Summary:
- I noticed that the hello app crashes due to
https://github.com/apache/nuttx/pull/11576
- This is a tentative fix to avoid the crash
Impact:
- None
Testing:
- Tested with qemu-8.2.0
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
If a TX DMA completion interrups a forground write.
The TX DMA completion can start a dma_send and it will
then followed by the forground write's dma_send
stoping the,then in progress DMA.
By atomicaly marking the tx dma busy, the forground
write will not perform the dma_send, and will only
enqueue the data. At the next TX dma completion any
data pending in the tx queue will be sent
- disable NSH_SYMTAB to avoid build errors with cmake.
- enable LIBM to avoid build errors with Ubuntu stock
gcc-riscv64-unknown-elf toolchain.
- use HELLO=y for easy use within qemu console.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
