so netdb could reuse these global variable directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iaa26ddbdaf416f64d43c6e8888a14bbe0c3405eb
* The appropriate size of stack varies among archs.
E.g. for 64-bit sim, 2048 is way too small, especially when the task
happens to use host OS functionalities.
I plan to allow an arch provide its own default.
* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
This reverts commit b9ace36fcc.
This change was added by PR 625 but has a serious logic flaw. It removes all occurrences of INCDIROPT and replaces it with a definition in tools/Config.mk:
else ifeq ($(WINTOOL),y)
DEFINE = "$(TOPDIR)/tools/define.sh"
INCDIR = "$(TOPDIR)/tools/incdir.sh" -w
This logic flaw is the Config.mk is included in all Make.defs files BEFORE WINTOOL is defined. As a result, the definition is wrong in many places when building under Cygwin with a Windows native toolchain.
boards/z80/ez80/z20x: Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c: Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
Rename lib_rawinstream.c to lib_rawsistream.c and lib_rawsistream.c to lib_rawinstream.c so that the content of the files match the name of the files. While we are at it, update the file license to Apache 2.0
Kconfig files. Repartition some functionality. Bootloader support will need to be provided in logic under arch/z80/src/ez80 so the critical configuration selections were moved the Kconfig file there.
arch/z80/src/ez80/ez80_i2c.h: Rename arch/z80/src/ez80/ez80f91_i2c.h. It is sharable by both ez80f91 and ez80f92.
arch/z80/src/ez80/: Add logic to perform an additional level of interrupt redirection. This is necessary because the the interrupt handling is part of the loader FLASH-based logic. In order to share interrupts with the program loaded into RAM by the loader, another layer or redirection is required to get control to the interrupt handlers in the loaded program. See ez809f2_loader.asm and ez80f92_program.asm
boards/z80/ez80/z20x/scripts: Reduce size of the interrupt re-direction buffer from 1Kb to 512b.
* Adding support for BQ769x0 Battery Monitor IC (Work In Progress)
* Additional changes to support BQ769x0
* Store cell count and chip type when setting up
* Added shutdown, limits, charge/discharge switch, and clear faults operations
* Added support for current measurement; some cleanup
* Updated temperature reporting. Fixed negative current reporting.
* When setting safety limits, update limit structure with actual values used.
* Added note on battery limit structure
* Updates to BQ769x0. Re-ordered fault reporting, added fault cache, added ordered fault clearing
Eliminate the MOVEOBJ definition from tools/Config.mk, Makefiles, and other locations. The MOVEOBJ definition was used to work around the case where the object output of a compile or assemble is in a different directory than the source file. The ZDS-II tools have no command line option to perform this move; MOVEOBJ handled the move as a post-compiler operation.
MOVEOBJ is no longer needed because this the ez80 COMPILE and ASSEMBLE definitions now handle all of the object file movement cases.
PR317 removed definitions for SEC_PER_MIN, SEC_PER_HOUR, and SEC_PER_DAY because these were duplicates of definitions in include/nuttx/clock.h. However, the PR did not include nuttx/clock.h so the removal of these definitions resulted in compilation failures.
Noted by Ouss4
time/lib_gmtimer.c:54: warning: "SEC_PER_MIN" redefined
54 | #define SEC_PER_MIN ((time_t)60)
|
In file included from nuttx/include/nuttx/semaphore.h:48,
from nuttx/include/pthread.h:56,
from nuttx/include/signal.h:50,
from nuttx/include/sys/select.h:46,
from nuttx/include/sys/types.h:305,
from nuttx/include/time.h:46,
from time/lib_gmtimer.c:44:
nuttx/include/nuttx/clock.h:125: note: this is the location of the previous definition
125 | #define SEC_PER_MIN 60L
|
time/lib_gmtimer.c:55: warning: "SEC_PER_HOUR" redefined
55 | #define SEC_PER_HOUR ((time_t)60 * SEC_PER_MIN)
|
In file included from nuttx/include/nuttx/semaphore.h:48,
from nuttx/include/pthread.h:56,
from nuttx/include/signal.h:50,
from nuttx/include/sys/select.h:46,
from nuttx/include/sys/types.h:305,
from nuttx/include/time.h:46,
from time/lib_gmtimer.c:44:
nuttx/include/nuttx/clock.h:138: note: this is the location of the previous definition
138 | #define SEC_PER_HOUR (SEC_PER_MIN * MIN_PER_HOUR)
|
time/lib_gmtimer.c:56: warning: "SEC_PER_DAY" redefined
56 | #define SEC_PER_DAY ((time_t)24 * SEC_PER_HOUR)
|
In file included from nuttx/include/nuttx/semaphore.h:48,
from nuttx/include/pthread.h:56,
from nuttx/include/signal.h:50,
from nuttx/include/sys/select.h:46,
from nuttx/include/sys/types.h:305,
from nuttx/include/time.h:46,
from time/lib_gmtimer.c:44:
nuttx/include/nuttx/clock.h:141: note: this is the location of the previous definition
141 | #define SEC_PER_DAY (HOURS_PER_DAY * SEC_PER_HOUR)
|
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
