sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,422 Commits 1 Branch 0 Tags
Commit Graph

659 Commits

Author SHA1 Message Date
Gregory Nutt
949e002d76 Fix a recently introduced typo that was being masked by some bad conditional compilation 2014-07-22 11:45:14 -06:00
Gregory Nutt
af8f5f4bdc SAMA5D4 XDMAC: Never sets a channel as secure. Will probably have to revisit this 2014-07-21 17:46:35 -06:00
Gregory Nutt
4ce2e094ba SAMA5D4: Fix some HSMCI issues when XDMAC0 is enabled 2014-07-21 17:45:48 -06:00
Gregory Nutt
80c0b5628d SAMA5 HSMCI: Correct multi-block DMA setup; Fixes related to DMA timeout. Still problems with HSMCI DMA via XDMAC 2014-07-21 16:49:56 -06:00
Gregory Nutt
519c8f3e97 SAMA5 XDMAC: Missing some CUBC bits 2014-07-21 16:47:16 -06:00
Gregory Nutt
2d69c2f519 SAMA4D5 HSMCI: Set burst size to 1, sample DMA registers on timeout, and don't return from transfer until BOTH the HSMCI transfer and DMA complete 2014-07-21 13:24:55 -06:00
Gregory Nutt
c5b58b189c XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup 2014-07-21 13:23:36 -06:00
Gregory Nutt
35ea8f1542 Fix a commented out assertion 2014-07-20 17:06:55 -06:00
Gregory Nutt
b207138be9 Fix typos in comments 2014-07-20 13:09:47 -06:00
Gregory Nutt
7ba2d9ed36 SAMA5D4-EK: PIO Schmitt trigger logic backward 2014-07-20 13:04:30 -06:00
Gregory Nutt
9392953ea1 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
7c56185006 SAMA5D ADC: Fix some typos in conditional compilation 2014-07-19 13:56:48 -06:00
Gregory Nutt
3c29703c42 SAMA5 SCK: The SAMA5D3 does things a little differently 2014-07-19 13:55:53 -06:00
Gregory Nutt
e82143ac38 SAMA5 PCK: Add support for the slow clock as the PCK clock source 2014-07-19 13:55:08 -06:00
Gregory Nutt
8986bd3976 SAMA5: Update slow clock logic. Things work a little differently on the SAMA5D3 2014-07-19 13:25:59 -06:00
Gregory Nutt
813eade679 SAMA5: Add slow clock support 2014-07-19 13:07:55 -06:00
Gregory Nutt
c7055a4cb8 SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
8055a59d49 SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
424d47cfee SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
30603b1021 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
67468408ae SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
c7d53cb927 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
6563ae07c2 Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
fc973eb512 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
0d4255257d SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c1ca11331d SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
ee351dc695 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
c4b9eaa01f Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
6c4f57b0dc SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
446d9daa94 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
8bc8a86b90 SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
3fe95f83de Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
14c90921b3 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
ae95f4e4d2 SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
56629f7fde maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
77439f3c75 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
2bd5963622 SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
8b2fb4725b SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
fb44a97359 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
596dbc20ef SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
30fc821bc8 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
a420171a4a SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
e7aa949380 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
f5abca3952 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
a2507acab8 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
289dc6dc71 SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00