Commit Graph

2025 Commits

Author SHA1 Message Date
Rodrigo Sim
21ba49408c boards/stm32: add support to STM32F401RC-RS485 board
The STM32F401RC-RS485 is a board with RS485 support, SD Card, buttons,
leds, temperature sensor, adc and etc.

Signed-off-by: Rodrigo Sim rcsim10@gmail.com
2023-10-23 14:28:27 +08:00
GD32-MCU
6e94f7432f add gd32f470i board support 2023-10-21 11:45:03 -03:00
chao an
fa943c11b3 cmake: correct cmake rule file name
The rule of cmake file name should be CMakeLists.txt not CMakeList.txt

Signed-off-by: chao an <anchao@xiaomi.com>
2023-10-21 11:00:27 +08:00
Xiang Xiao
04f834290c ucans32k146/se05x: Refresh defconfig after https://github.com/apache/nuttx-apps/pull/2131
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-10-19 12:37:42 +08:00
makejian
7d6c529e88 sim/crypto: Use mbedtls default configuration without special check
depends on patch https://github.com/apache/nuttx-apps/pull/2131
Signed-off-by: makejian <makejian@xiaomi.com>
2023-10-18 21:18:42 +08:00
Alan Carvalho de Assis
444b6d9635 boards: Update all boards that were using CONFIG_NET_LL_GUARDSIZE=50 2023-10-16 08:55:21 +08:00
Philippe Leduc
f38cdb09b4 Add support for SPI through i.MX8MP ecspi module.
Configure SPI for Verdin evaluation board
2023-10-09 18:04:50 -04:00
raiden00pl
dbe10a0fc8 boards: simplify the enable condition for up_perf_init 2023-10-03 12:53:10 +08:00
Hank Wu
f144169f44 Initialize led driver during bringup for nucleo-f446re board. 2023-10-01 19:33:55 +08:00
raiden00pl
cb04c0a928 boards/nrf52: remove CONFIG_ARMV7M_SYSTICK form tickless configurations 2023-09-29 21:02:46 +08:00
raiden00pl
3f1417ef8d boards: add nrf9160-dk board support (nrf52840 chip) 2023-09-25 23:06:39 +08:00
Xiang Xiao
29ec45036d boards/arm/tlsr82: Fix apps/testing/ostest/setvbuf.c:48: undefined reference to `fopen'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-09-24 19:32:55 -04:00
raiden00pl
7f2fe65749 thingy53: assign separate TWI instances to SPI and I2C 2023-09-24 19:41:31 +08:00
raiden00pl
064f311a9d thingy53: cosmetics 2023-09-24 19:41:31 +08:00
raiden00pl
367a5002ae thingy53: add i2ctools support 2023-09-24 19:41:31 +08:00
raiden00pl
4314feaa0b thingy53: add rgbled support 2023-09-24 19:41:31 +08:00
raiden00pl
11a3484e86 boards: add initial support for thingy91 board (nrf9160 and nrf52840 chips) 2023-09-24 19:38:47 +08:00
Theo
52096aeb80 Add activation of SPI0 on arduino due 2023-09-23 01:46:23 +08:00
raiden00pl
3ad3b66e11 boards/thingy52: use RTT console as default
External JLink is required to program the board, so the console via RTT
is available anyway. It is much more convenient to use than soldering the
P4 connector and working with an external UART converter.
2023-09-22 19:46:43 +08:00
raiden00pl
59cf80cf90 boards/nucleo-h745zi: access CM4 core NSH over uart rpmsg
Command on the CM7 core:

  nsh-cm7> cu -l /dev/ttyproxy
  NuttShell (NSH) NuttX-10.4.0
  nsh-cm4>
2023-09-22 19:46:26 +08:00
Daniel P. Carvalho
f0bc20c815 Fix I2C1 pinout. 2023-09-22 00:54:07 +08:00
simbit18
4f985f4367 Fix Kconfig style
Remove spaces from Kconfig
Add comments
2023-09-22 00:35:48 +08:00
simbit18
34bb0b6544 Fix nuttx coding style
Remove TABs
Remove spaces
Fix indentation
2023-09-21 10:03:13 -04:00
ThomasNS
a2c806027f fix led panic feature 2023-09-21 00:35:12 +08:00
Philippe Leduc
b47f240b5f Use standard arm-none-eabi toolchain by default. 2023-09-20 17:26:35 +08:00
xiao
1487aa267e add Artery at32
check nxstyle

check nxstyle
2023-09-20 02:07:55 +08:00
Xiang Xiao
8dbe86084e Remove FAR from source code under 32bit arch and board
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-09-16 19:12:13 +03:00
Daniel Appiagyei
5bfda12634 c++ compatibility: rename reserved c++ keywords 'public' and 'this' 2023-09-16 19:45:02 +08:00
Alan Carvalho de Assis
0f73199de6 board/stm32f777zit6-meadow: Add support to F7 Core Compute
This patch add basic support to Meadow F7 Core Compute board.
The board profile "f7corecomp" include support to USB Console
and SD Card.
2023-09-16 14:32:53 +08:00
Petro Karashchenko
057bfd3748 boards/arm/samv7: fix return values in GPIO based encoder driver
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-09-16 14:17:47 +08:00
liaoao
a2ca68aaa7 qemu:fix ci error
Signed-off-by: liaoao <liaoao@xiaomi.com>
2023-09-14 15:19:59 +08:00
simbit18
50e6dcb1e0 Fix nuttx coding style
Correct forming guard names
2023-09-13 22:49:38 +08:00
liaoao
a2b9cbffc2 qemu: get reg and irq from devicetree node rather than macro
fdt address is at 0x4000000, so it needs to be reserved at ld script.

Signed-off-by: liaoao <liaoao@xiaomi.com>
2023-09-12 21:59:26 +08:00
Andre Heinemans
329e050c30 Added NXP SE05x support (secure element) 2023-09-09 15:54:08 +08:00
SPRESENSE
a015aa4fca boards: cxd56xx: Add board-specific driver for bmi270 2023-09-09 00:46:24 +08:00
ThomasNS
109247e723 add buttons to stm32f411e-diso 2023-09-09 00:18:56 +08:00
trns1997
153137a258 Add userleds and autoleds to the stm32f411e-disco board 2023-09-08 01:30:54 +08:00
simbit18
74b4672b76 Fix Kconfig style
Remove spaces from Kconfig
Add comments
2023-09-08 01:13:53 +08:00
Michal Lenc
c2bc3dfb12 samv7: add support for SD card detection from CD/DAT3 line
Some SD card connectors do not have separate card detection pin. In that
case card detection has to be done on CD/DAT3 data line. This means
software (i.e. architecture level driver) has to take care of pin
configuration switching (pin has to be set as data pin in case of
transfer and as interrupt card detection pin when there is no action
on data line).

This commit adds CD/DAT3 line card detection support for SAMv7 MCU.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-09-08 01:13:36 +08:00
Philippe Leduc
87cec56154 Handle GPIO IRQs
Add board buttons
2023-09-06 12:30:35 +08:00
Philippe Leduc
5b7c948aef Add GPIO
Add userleds
2023-09-06 12:30:35 +08:00
zhangyuan21
0efd4d0e12 usbdev: Split usbdev descriptor information
The class device only handles descriptor information specific to the class,
and shared descriptor information is passed through parameters and
handled by the composite driver.

Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2023-09-06 02:29:32 +08:00
Xiang Xiao
7f3a76c290 Replace strlen with sizeof for kconfig string
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-09-02 16:26:23 +03:00
Alan Carvalho de Assis
c27c33e9a9 Run refresh.sh to update all board configs 2023-09-02 14:45:44 +08:00
Michal Lenc
dc83526368 samv7: include mpu.h in sam_boot_image.c to avoid compilation warnings
Header file mpu.h was not included although mpu_control() function
was used.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-08-31 18:07:40 +03:00
Philippe Leduc
98e998b934 Add i2c support for the i.MX8MP
Enable INA219 on the Verdin board
2023-08-31 10:35:46 -03:00
chao an
664927c86e mm/alloc: remove all unnecessary cast for alloc
Fix the minor style issue and remove unnecessary cast

Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-30 14:34:20 +08:00
cuiziwei
4ec7af779d nuttx/boards:init_array.* needs to be executed in order
When I try to set priorities in certain programs, such as init_priority(HIGH_PRIORITY), I've noticed that during linking, there's no guarantee that the programs will be compiled in the sequence I've specified based on priority. This has led to some runtime errors in my program.

I realized that in the ld file, when initializing dynamic arrays, there's no assurance of initializing init_array.* before init_array. This has resulted in runtime errors in the program. Consequently, I've rearranged the init_array.* in the ld file of NuttX to be placed before init_array and added a SORT operation to init_array.* to ensure accurate initialization based on priorities during linking.
2023-08-29 22:54:37 +08:00
chao an
b60f01a55b inode/i_private: remove all unnecessary cast for i_private
Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-29 08:58:07 +02:00
chao an
7aa45305b7 fs/inode: remove all unnecessary check for filep/inode
Since VFS layer already contains sanity checks, so remove unnecessary lower half checks

Signed-off-by: chao an <anchao@xiaomi.com>
2023-08-29 09:47:11 +08:00