sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,417 Commits 1 Branch 0 Tags 291 MiB
edd4d44fba
Commit Graph

134 Commits

Author SHA1 Message Date
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Gregory Nutt
091e3f732e net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html 2018-04-25 08:43:38 -06:00
Goran Mekić
f6e087a05c Merged in mekanix/nuttx/feature/clang (pull request #632) 
Add clang support to stm32f746g-disco board

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-24 22:46:03 +00:00
Gregory Nutt
dc8941e958 configs/: Add definition of strip to many Make.defs files. 2018-03-25 09:25:37 -06:00
Louis Mayencourt
bd81664b31 configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration. Add USART1 support (connected to the USB virtual serial port) 2018-02-19 14:38:22 -06:00
Gregory Nutt
0f10f6bdec configs/*/include; Remove prototype of stm32_boardinitialize() from board.h files. The authorative prototype is in arch/arm/src/stm32*/stm32*_start.h 2017-12-16 20:02:03 -06:00
Gregory Nutt
f6f4856cc6 Eliminate some warnings found in build testing. 2017-08-13 12:24:48 -06:00
Gregory Nutt
873de7b480 configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain. 2017-08-13 07:18:19 -06:00
Ivan Ucherdzhiev
aac877a268 STM32F746-Disco: Add ADC3 support. 2017-08-05 12:54:42 -06:00
Gregory Nutt
8a785c4b66 Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases. 2017-08-03 08:37:05 -06:00
Gregory Nutt
d5e7ebed02 configs/stm32f746g-disco: Remove inclusion of STm32-specifiy header files from board.h 2017-08-02 17:34:29 -06:00
Ivan Ucherdzhiev
e0fd3a2d11 Fix for stm32f746g-disco board for button support with interrupt. This change is tested with buttons app example and it is working with interrupts (signals). I tried the test with polling but at this point it doesn't work. 2017-08-02 17:28:55 -06:00
Gregory Nutt
2c504003f3 stm32f746g-disco: Make the initialization logic identical to the standard way that is done for all other board. 2017-08-01 07:02:29 -06:00
Ivan Ucherdzhiev
a9e4e02c81 Fixes for compilation of stm32f746g-disco 2017-08-01 06:50:53 -06:00
Gregory Nutt
5f31999b75 Trivial fix to spacing 2017-07-27 11:50:59 -06:00
Titus von Boxberg
28eab902d0 No FSMC, only FMC for STM32F7 2017-07-27 18:27:01 +02:00
Titus von Boxberg
ee6416d3df inconsistency: the stm32f746 does not feature a DSI interface 2017-07-19 19:14:49 +02:00
Titus von Boxberg
006fa75171 corrected typos and inconsistencies for USB OTG configuration 2017-07-18 11:43:53 +02:00
Gregory Nutt
382def3df5 Move remaining, unique Make.defs files into scripts directory. 2017-07-11 12:13:36 -06:00
Gregory Nutt
e40ccc1b60 Move remaining, unique Make.defs files into scripts directory. 2017-07-11 11:14:11 -06:00
Gregory Nutt
5a9eebe270 More conversions of defconfig files to compressed format. All but Windows native configurati9ons. 2017-07-09 20:05:59 -06:00
Gregory Nutt
44545781e5 configs/: Remove dangline space at the end of lines in .txt files. 2017-06-28 13:18:41 -06:00
Gregory Nutt
cd54a0340f Fix a typo. And typo in Kconfig file is reflect in all defconfig files. 2017-06-15 14:29:09 -06:00
Gregory Nutt
b0fda33e13 Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR 2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557 Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU 2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Sebastien Lorquet
aca2e36d67 stm32 devboards 2017-04-28 18:26:05 +02:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4 Remove all setenv.sh files. 2017-04-26 07:49:37 -06:00
Gregory Nutt
77f980e676 Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set. 2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported. 2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads. 2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305 Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:14 -06:00
Gregory Nutt
c428661e18 apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support. 2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5 Refresh all ARM configurations 2017-03-09 10:23:41 -06:00
Gregory Nutt
4f5e0e3519 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 15:27:55 -06:00
Gregory Nutt
4c82827ab1 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 14:37:22 -06:00
Gregory Nutt
67de2e5f66 Add argument to STM32 EXTI interrupt handlers. 2017-02-27 14:21:30 -06:00
Jussi Kivilinna
4dfb8268f3 stm32f7: stm32_allocateheap: allow use DTCM memory for heap 
STM32F7 has up to 128KiB of DTCM memory that is currently left unused.

This patch adds DTCM to main heap if CONFIG_STM32F7_DTCMEXCLUDE is not enabled.
 2017-02-20 08:42:51 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
3c4684ef5f Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename. 2017-01-20 09:30:07 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b Remove all Calypso board configurations 2016-12-13 18:24:49 -06:00
Gregory Nutt
c0cbea2550 Remove RGMP and RGMP drivers. 2016-12-02 09:49:33 -06:00
Beat Küng
c7da88e383 CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used 
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
 2016-08-22 08:35:01 +02:00
Gregory Nutt
b071e4ce92 Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes 2016-08-08 12:50:14 -06:00
Gregory Nutt
f43ded46e6 Rename arch/sh to arch/renesas, cont'd 2016-08-06 14:03:38 -06:00
Gregory Nutt
4742999e45 Remove references to non-existent kostest from README.txt 2016-06-28 14:45:30 -06:00