Gregory Nutt
|
4539988d00
|
Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero().
|
2017-02-22 10:41:49 -06:00 |
|
Gregory Nutt
|
1d290c2b37
|
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
|
2017-02-09 09:24:44 -06:00 |
|
Gregory Nutt
|
3dbdb3bb31
|
CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit
|
2017-01-31 11:52:00 -06:00 |
|
Gregory Nutt
|
9ac00a355f
|
Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots.
|
2017-01-31 09:16:01 -06:00 |
|
Gregory Nutt
|
a2150c1e35
|
Olimex STM32 P407: Add support for on-board microSD slot. Does not work... Currently all commands to the SD card timeout.
|
2017-01-28 10:17:10 -06:00 |
|
Gregory Nutt
|
3c4684ef5f
|
Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename.
|
2017-01-20 09:30:07 -06:00 |
|
Gregory Nutt
|
4216c4b777
|
NxWM configurations. If using a 7-bit character set, then the cursor character cannot be 137 (graphic block). Use 95 (underscore) instead.
|
2017-01-08 09:21:37 -06:00 |
|
Gregory Nutt
|
7035d232f8
|
NX server: Correct message queue names. Should not be at /dev, but rather relative to /var/mqueue.
|
2017-01-08 09:14:11 -06:00 |
|
Gregory Nutt
|
e1d9bb2ef2
|
Refresh all NX multi-user configurations
|
2017-01-08 08:06:18 -06:00 |
|
Gregory Nutt
|
725ba1602a
|
Font cache: misc fixes and improvements
|
2017-01-06 11:06:50 -06:00 |
|
Gregory Nutt
|
f063e4c5ac
|
Remove Calypso architecture support and support for Calypso SERCOMM driver.
|
2016-12-13 18:35:52 -06:00 |
|
Gregory Nutt
|
d9e040d76b
|
Remove all Calypso board configurations
|
2016-12-13 18:24:49 -06:00 |
|
Gregory Nutt
|
35dfe25430
|
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
|
2016-12-06 08:51:37 -06:00 |
|
Gregory Nutt
|
ee2852f5ff
|
Remove all references to board_adc_setup()
|
2016-12-05 17:06:08 -06:00 |
|
Gregory Nutt
|
55dd1c87b3
|
Remove all references to BOARDIOC_ADCSETUP
|
2016-12-05 15:31:40 -06:00 |
|
Gregory Nutt
|
4b216ff8dd
|
Finish removing traces of BOARDIOC_PWMSETUP
|
2016-12-05 14:56:21 -06:00 |
|
Gregory Nutt
|
b999e63c82
|
Remove some references to BOARDIOC_PWMTEST and board_pwm_setup(). Still lots more.
|
2016-12-05 13:54:12 -06:00 |
|
Gregory Nutt
|
83477c55f8
|
STM32 Ethernet configurations must have work queue enabled.
|
2016-12-03 17:06:14 -06:00 |
|
Gregory Nutt
|
7467329a98
|
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
|
2016-12-03 16:28:19 -06:00 |
|
Gregory Nutt
|
c0cbea2550
|
Remove RGMP and RGMP drivers.
|
2016-12-02 09:49:33 -06:00 |
|
Gregory Nutt
|
99987a3d51
|
Increase max message size in all NxWM configurations.
|
2016-12-02 08:38:42 -06:00 |
|
Gregory Nutt
|
fa03fa5ea9
|
Refresh more defconfig files
|
2016-12-01 17:07:54 -06:00 |
|
Gregory Nutt
|
86b5f3b9ed
|
boardctl: Add new command to start the NX server as a kernel thread. Also refresh more configurations.
|
2016-12-01 15:05:57 -06:00 |
|
Gregory Nutt
|
6dda185e8a
|
NX: Remove configuration CONFIG_NX_NXSTART. nx_start.c is now built unconditionally in multi-user mode.
|
2016-12-01 13:30:24 -06:00 |
|
Gregory Nutt
|
44e747ebf1
|
Remove all references to CONFIG_NET_MULTIBUFFER from configs/
|
2016-11-29 15:07:30 -06:00 |
|
Gregory Nutt
|
439c72e7c8
|
Refresh all networking configurations due to changes in work-queue related configuration variables for Ethernet drivers.
|
2016-11-19 09:41:24 -06:00 |
|
Beat Küng
|
c7da88e383
|
CXXFLAGS: add -fcheck-new whenever -fno-exceptions is used
This is to avoid GCC to optimize null-pointer checks away, in case the
default operator new is used together with -fno-exceptions.
|
2016-08-22 08:35:01 +02:00 |
|
Gregory Nutt
|
b071e4ce92
|
Refresh all STM32, EFM32, and SAMV7 configurations for SPI H/W features configuration changes
|
2016-08-08 12:50:14 -06:00 |
|
Gregory Nutt
|
f43ded46e6
|
Rename arch/sh to arch/renesas, cont'd
|
2016-08-06 14:03:38 -06:00 |
|
Gregory Nutt
|
5a0f9fcb7d
|
Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized.
|
2016-07-23 10:36:06 -06:00 |
|
Gregory Nutt
|
1b9b3a7b47
|
pwm.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:48:24 -06:00 |
|
Gregory Nutt
|
ddcaa3d425
|
can.h moved from include/nuttx/ to include/nuttx/drivers.
|
2016-07-20 13:38:36 -06:00 |
|
Gregory Nutt
|
2a19e16eb0
|
libc/hex2bin: Move the portable library portion of apps/system/hex2bin to nuttx/libc/hex2bin where it can be shared with the OS internals.
|
2016-06-27 11:22:38 -06:00 |
|
Gregory Nutt
|
1377452394
|
Refresh all ARM configurations
|
2016-06-23 15:59:14 -06:00 |
|
Gregory Nutt
|
5118264e6c
|
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
|
2016-06-21 09:35:51 -06:00 |
|
Gregory Nutt
|
43eb04bb8f
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
Gregory Nutt
|
5b2aa7bf99
|
Remove all traces of CONFIG_SYSLOG
|
2016-06-19 13:59:43 -06:00 |
|
Gregory Nutt
|
0c8c7fecf0
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
|
Gregory Nutt
|
03cbe671ad
|
Centralize definitions associated with CONFIG_DEBUG_PWM
|
2016-06-15 17:23:56 -06:00 |
|
Gregory Nutt
|
63b1eb09e6
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
|
Gregory Nutt
|
2ddd57c674
|
Centralize definitions associated with CONFIG_DEBUG_LEDS
|
2016-06-15 14:12:19 -06:00 |
|
Gregory Nutt
|
24c51ec1ff
|
Centralize definitions associated with CONFIG_DEBUG_LCD
|
2016-06-15 11:40:33 -06:00 |
|
Gregory Nutt
|
ba03134bed
|
Centralize definitions associated with CONFIG_DEBUG_SPI
|
2016-06-15 10:41:13 -06:00 |
|
Gregory Nutt
|
a5457987d8
|
configs/: Change some err() ERRORS to warn() WARNINGS or info()
|
2016-06-12 17:02:46 -06:00 |
|
Gregory Nutt
|
a1469a3e95
|
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
|
2016-06-11 15:50:49 -06:00 |
|
Gregory Nutt
|
e99301d7c2
|
Rename *lldbg to *llerr
|
2016-06-11 14:55:27 -06:00 |
|
Gregory Nutt
|
1cdc746726
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
|
Gregory Nutt
|
fc3540cffe
|
Replace all occurrences of vdbg with vinfo
|
2016-06-11 11:59:51 -06:00 |
|
Gregory Nutt
|
3a74a438d9
|
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
|
2016-06-11 11:50:18 -06:00 |
|
Gregory Nutt
|
89c9aca89e
|
All configurations that have both CONFIG_NSH_LIBRARY=y and CONFIG_NET=y must now also have CONFIG_NSH_NETINIT=y
|
2016-06-09 09:29:47 -06:00 |
|
Gregory Nutt
|
5c9e11f1b0
|
Refresh all configurations that have both CONFIG_NSH_LIBRARY and CONFIG_NET set in preparation for another change.
|
2016-06-09 09:25:20 -06:00 |
|
Gregory Nutt
|
ba0040fe1f
|
NxWM configurations need boardctl() with touchscreen support
|
2016-06-05 13:18:43 -06:00 |
|
Gregory Nutt
|
f2c65a4c47
|
Refresh configurations
|
2016-06-05 12:14:34 -06:00 |
|
Gregory Nutt
|
910bac65fa
|
STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville.
|
2016-06-03 11:38:59 -06:00 |
|
Gregory Nutt
|
2b47473778
|
Remove all references to CONFIG_SYSTEM_FLASH_ERASEALL
|
2016-06-02 10:19:02 -06:00 |
|
Gregory Nutt
|
d89eefc6a5
|
Refresh all STM32 configurations
|
2016-05-25 12:39:28 -06:00 |
|
Gregory Nutt
|
9ec104834a
|
Remove CONFIG_USARTn_ISUART
|
2016-05-25 11:21:48 -06:00 |
|
Gregory Nutt
|
c089a2f241
|
Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER
|
2016-05-25 10:48:33 -06:00 |
|
Gregory Nutt
|
e2e6ce3f1b
|
Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER
|
2016-05-25 10:46:55 -06:00 |
|
Gregory Nutt
|
2a87741e72
|
Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER
|
2016-05-25 10:45:01 -06:00 |
|
Gregory Nutt
|
249a2e48e5
|
Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER
|
2016-05-25 10:39:23 -06:00 |
|
Gregory Nutt
|
4b3e710af6
|
Add an argument to board_app_initialize()
|
2016-05-24 10:51:22 -06:00 |
|
Gregory Nutt
|
8ace1e3be2
|
Remove all implementatinos of up_wdginitialize(). It is no longer used.
|
2016-05-18 19:48:42 -06:00 |
|
Gregory Nutt
|
1d2ee34131
|
SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface.
|
2016-05-18 19:47:41 -06:00 |
|
Gregory Nutt
|
3228d32938
|
Correct permmisions on executable scripts
|
2016-04-10 09:11:59 -06:00 |
|
Gregory Nutt
|
7337e748de
|
Merge in configs/ submodule
|
2016-04-10 07:57:59 -06:00 |
|
Gregory Nutt
|
3e0efd7279
|
Fix all URLs to the NuttX repository
|
2016-04-06 17:56:40 -06:00 |
|
Gregory Nutt
|
379a61621c
|
STM3240G-EVAL and VIEWTOOL-STM32F107: Refresh configurations; add support to register the RTC driver
|
2016-04-03 13:34:04 -06:00 |
|
Gregory Nutt
|
99df0f459d
|
All STM32 configurations need to set CONFIG_ARM_TOOLCHAIN_GNU=y
|
2016-04-02 07:21:25 -06:00 |
|
Gregory Nutt
|
ad61b7ab3e
|
Remove all references to CONFIG_SYSTEM_SDCARD
|
2016-03-30 17:53:19 -06:00 |
|
Gregory Nutt
|
e5b0c0e502
|
Remove most unused references to CONFIG_NET_MULTICAST. Rename other uses of CONFIG_NET_MULTICAST to avoid naming comflicts.
|
2016-03-20 13:15:58 -06:00 |
|
Gregory Nutt
|
4b1c510f6f
|
Refresh all STM32 configurations
|
2016-03-08 17:03:32 -06:00 |
|
Gregory Nutt
|
f5c987a627
|
Change name IMX to IMX1 in configuration variable names to make room for i.MX6
|
2016-02-28 15:19:19 -06:00 |
|
Gregory Nutt
|
12c14ee718
|
Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS
|
2016-02-26 16:45:29 -06:00 |
|
Kha Vo
|
c71ed665c2
|
On stm32F2xx gpio is encoded to 20bits but the button definitions use 16bit type.
|
2016-02-25 11:12:27 -06:00 |
|
Gregory Nutt
|
1699561bb6
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 12:37:46 -06:00 |
|
Gregory Nutt
|
9ed7d56a18
|
Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE
|
2016-02-04 12:14:17 -06:00 |
|
Gregory Nutt
|
d5cbcc1293
|
I2C Tool: Now that the I2C tool uses a character driver, the I2C character drivers must be initialized in board bring-up logic
|
2016-02-02 14:22:54 -06:00 |
|
Gregory Nutt
|
a135df609f
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:25:14 -06:00 |
|
Gregory Nutt
|
6b449ac409
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:15:32 -06:00 |
|
Gregory Nutt
|
1615a5ead0
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:35:50 -06:00 |
|
Gregory Nutt
|
2591281375
|
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
|
2016-01-30 08:00:01 -06:00 |
|
Gregory Nutt
|
656e730f8f
|
apps/system/ramtron has been removed.
|
2016-01-27 10:39:30 -06:00 |
|
Gregory Nutt
|
9f2a839ac3
|
For STM32 boards, rename up_spiinitialize to stm32_spibus_initialize
|
2016-01-26 12:21:39 -06:00 |
|
Gregory Nutt
|
4819fc2e8d
|
I2C: Eliminate the I2C_WRITEREAD method
|
2016-01-26 10:24:36 -06:00 |
|
Gregory Nutt
|
9535c909d3
|
Rename CONFIG_SYSTEM_INIFILE to CONFIG_FSUTILS_INIFILE
|
2016-01-20 17:11:48 -06:00 |
|
Gregory Nutt
|
004f4b8896
|
All bash scripts should be marked executable
|
2016-01-15 07:54:27 -06:00 |
|
Gregory Nutt
|
2a5bdf230c
|
Merge remote-tracking branch 'origin/master' into windeps
|
2016-01-09 16:38:13 -06:00 |
|
Gregory Nutt
|
9e548d34c3
|
mkdeps.sh and mkdeps.bat have been deleted. All configurations must now use the compiler mkeps prograqm
|
2016-01-09 16:06:15 -06:00 |
|
Gregory Nutt
|
e46cd30c14
|
Change use of mknulldeps.sh to mkwindeps.sh
|
2016-01-09 14:13:44 -06:00 |
|
Gregory Nutt
|
b90f5ba7f4
|
Remove CONFIG_DISCRETE_IO from all defconfig files
|
2015-12-15 08:41:10 -06:00 |
|
Gregory Nutt
|
c41449b12a
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:56 -06:00 |
|
Gregory Nutt
|
a0e662f769
|
Refresh all configurations that have Telnetd enabled; those configurations now also need the telnet driver
|
2015-12-07 10:01:13 -06:00 |
|
Gregory Nutt
|
9a4192d22b
|
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
|
2015-12-01 07:47:41 -06:00 |
|
Gregory Nutt
|
651bd9e8ad
|
Rename CONFIG_LOOP to CONFIG_DEV_LOOP
|
2015-11-25 17:11:27 -06:00 |
|
Gregory Nutt
|
5773e78a16
|
In protected build, need to specify CPU configuration on GCC command line or we get the wrong libgcc
|
2015-11-18 11:43:00 -06:00 |
|
Gregory Nutt
|
936c208af4
|
Renaming for better consistency
|
2015-11-01 16:26:50 -06:00 |
|
Gregory Nutt
|
b28bd72a48
|
Standardize naming of user LEDs interface functions
|
2015-11-01 12:45:58 -06:00 |
|
Gregory Nutt
|
f56ed529e5
|
Remove prototypes for all user LED interfaces from board.h header files
|
2015-11-01 10:53:34 -06:00 |
|
Gregory Nutt
|
893bd9c7b5
|
Rename board_led_off to board_autoled_off
|
2015-11-01 09:10:08 -06:00 |
|