STM32L4 RTC, PM: small fixes to subseconds handling, ADC power-management hooks
* STM32L4 ADC: add PM hooks from Motorola MDK
* STM32L4 RTC: add up_rtc_getdatetime_with_subseconds
* STM32 RTC: workaround for potential subseconds race condition
In all recent STM32 chips reading either RTC_SSR or RTC_TR is supposed to lock
the values in the higher-order calendar shadow registers until RTC_DR is read.
However many old chips have in their errata this silicon bug (at least F401xB/C,
F42xx, F43xx, L15xxE, L15xVD and likely others):
"When reading the calendar registers with BYPSHAD=0, the RTC_TR and RTC_DR
registers may not be locked after reading the RTC_SSR register. This happens
if the read operation is initiated one APB clock period before the shadow
registers are updated. This can result in a non-consistency of the three
registers. Similarly, RTC_DR register can be updated after reading the RTC_TR
register instead of being locked."
* STM32L4 RTC: correct RTC_SSR and RTC_TR read ordering
In all recent STM32 chips reading either RTC_SSR or RTC_TR is supposed to lock
the values in the higher-order calendar shadow registers until RTC_DR is read.
Change the register read ordering to match this and don't keep a workaround
for a hypothetical race condition (not in any L4 errata, lets for once assume
ST's silicon works as it is documented...)
* STM32L4 PM: remove useless #ifdefs and old non-L4 STM32 code
Approved-by: Gregory Nutt <gnutt@nuttx.org>
binfmt: Fix some compilation issues introduced in previous changes. Verfied with the STM32F4-Discovery ELF configuration.
binfmt: schedule_unload() is an internal OS function and must not alter the errno variable.
binfmt: unload_module() is an internal OS function and must not alter the errno variable.
binfmt: load_module() is an internal OS function and must not alter the errno variable.
binfmt: exec_module() is an internal OS function and must not alter the errno variable.
configs/z80sim and xtrs: Serial driver lower halfs ioctl methods should return a negated errno value, not set the errno variable.
drivers/wireless: CC1101 driver not permitted to set errno.
drivers/sensors: LIS331DL driver not permitted to set errno.
drivers/lcd: ILI9341 initialize method not permitted to set errno,
drivers/serial: 16550 UART driver IOCTL method must not set errno; it must return a negated errno value.
STM32, STM32 F7: LTDC and DMA2D drivers are not permitted to set the errno.
SIM LPC31xx: Serial and console drivers are not permitted to set the errno.
SAMv7, STM32, STM32 L4: DAC and ADC drivers are not permitted to set the errno.
psock_close() and net_close() are internal OS functions and should not set the errno variable.
psock_ioctl() and netdev_ioctl() are internal OS functions and should not set the errno variable.
net_dupsd() and net_dupsd2() are internal OS functions and should not set the errno variable.
net/ and fs/: net_vfcntl(), file_fcntl(), file_dup(), and file_dup2() are all internal OS interfaces and should not modify the errno value.
net/: psock_recvfrom() is an internal interface and should not set the errno nor should it be a cancellation point.
net/: psock_accept() is not a cancellation point.
net/: psock_getsockopt() and psock_socket*9 are an internal interfaces and should not set the errno.
net/: psock_getsockopt() is an internal interface and should not set the errno.
net/: psock_listen() is an internal interface and should not set the errno.
net/: psock_connect(( is an internal interface and should not set the errno nor should it be a cancellation point.
net/: psock_bind() is an internal interface and should not set the errno.
net/: psock_accept() is an internal interface and should not set the errno.
fs/vfs:null check for path on open and buf on write
Null path check is depend on CONFIG_DEBUG_FEATURES and CONFIG_DEBUG_ASSERTIONS, added null checking so it's always performed
Added null checking on buf for write()
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
net/route: Flush in cache when any entry is deleted from the routing table. When a router matching an IP address is found, add the routing table entry to the cache.
net/route: Add utility functions to manage an in-memory cache to improve performance when use a file-based routing table.
There are two issues with it however:
1. Reading from file system on a per packet basis could be slow. I think it probably should have a small, in-memory cache of most frequently used routes for good problem.
2. Currently the delroute logic is disabled due to a problem with the design. NuttX does not currently support truncate(). Therefore, it is not possible to delete entries from the routing table file.
In this current implementation, that leaves the last entry intact at the end of the file. An alternative design might include a tag on each record to indicate if the record is valid or not. That would work but would add complexity to the other routing table functions.
The existing implementation is available for testing purposes only if CONFIG_EXPERIMENTAL=y.
Squashed commit of the following:
net/route: The current delroute design depends on file truncation. However, NuttX does not currently support truncate. Alternative, more complex designs are possible but not implemented. At present the file routing table are otherwise functional but the delroute logic is disabled via CONFIG_EXPERIMENTAL. Enable it only if you plan to fix it.
net/route: Fix some issues with locking routing table files.
net/route: Add partial implementation of delroute for the case where the routing table is in a file.
net/route: Add support for seeking to positions in the routing table.
net/route: Add net_addroute_ipv4/6() using a file-based routing table.
net/route: Add net_foreach_ipv4/4() using a file-based routing table.
net/route: Initial build, configuration, and fs utilies to support routing tables in a file.
STM32L4 FLASH, DFSDM: option bytes, JEXTSEL bits, ADC1 output to DFSDM chips change
* STM32L4 FLASH: add function for modifying device option bytes
* STM32L4 DFSDM: add JEXTSEL bits, ADC1 output to DFSDM chips change
ST's documentation hints that ADC output can be routed to DFSDM
on some STM32L4X3 chips, but I got confirmation from tech support
that this is just a documentation error so remove this from Kconfig.
Approved-by: Gregory Nutt <gnutt@nuttx.org>