CC: obstack/lib_obstack_printf.c "mmap/fs_rammap.c", line 126: warning #188-D: enumerated type mixed with
another type
enum mm_map_type_e type = (uintptr_t)entry->priv.p & 3;
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
maintains the same semantics as Kernel’s module build
and compatible with Kconfiglib implementation.
The problem of kconfiglib not being able to use tri-states is this:
linux is here torvalds/linux@6dd85ff
The module option is extracted from one of the triate three states into a MODULE keyword.
Kconfiglib supports the default implementation of module to be MODULE for compatibility with the linux kernel, and triate degenerates into bool two states
Refer to this code: 061e71f7d7/kconfiglib.py (L4274-L4284)
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
resson:
using percpu storage for g_current_regs or leveraging interrupt status
registers to determine if code is running within an interrupt context can enhance performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1. notify POLLIN to reader.
2. notify POLLPRI to writer,
in addition, notify POLLPRI to the user who completed the flush .
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Supports the flush operation of the sensor.
The application can initiate a flush action through ioctl SNIOC_FLUSH
to trigger flush, and the call will be returned immediately.
Using SNIOC_GET_EVENTS to clear flush event,
However, the flush implementation is asynchronous, when all the flush
data is push to upper circbuffer, the POLLPRI event(FLUSH_COMPLETED)
will be reported.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When there is an actual physical sensor, the driver must implement the get info interface. The upper layer can obtain the actual physical sensor information through SNIOC_GET_INFO.
SNIOC_SET_INFO can only set the information of the local virtual sensor, which means it is bound to the local advertisement. Remote subscribers cannot set the information.
Usage:
struct sensor_device_info dev_info;
orb_ioctl(fd, SNIOC_GET_INFO, (unsigned long)(uintptr_t)&dev_info);
or:
ret = orb_set_info(fd, &dev_info);
ret = orb_get_info(fd, &dev_info);
Signed-off-by: likun17 <likun17@xiaomi.com>
"~/nuttx/include/nuttx/sched.h", line 631: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD >= 0
^
"~/nuttx/include/nuttx/sched.h", line 637: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 642: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 789: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 793: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 631: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD >= 0
^
"~/nuttx/include/nuttx/sched.h", line 637: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 642: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 789: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 793: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
When statistics when sched_cpuload_critMonitor, thread switching only
calculates the current CPU's running time. Other CPU running threads
are updated for updates
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Compilation error:
Kasan/book. c: In the function '__hwasanloaded 16_noabort':
Kasan/book. c: 76:5: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
kasan_check_report(addr, size, false, return_address(0)); \
^
Kasan/book. c: 423:1: Note: in expansion of macro 'DEFINE-HWASAN_LOAD-STORE'
DEFINE_HWASAN_LOAD_STORE(16)
^
Kasan/book. c: In the function '__hwasan_store16_noabort':
Kasan/book. c: 80:5: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
kasan_check_report(addr, size, true, return_address(0)); \
^
Kasan/book. c: 423:1: Note: in expansion of macro 'DEFINE-HWASAN_LOAD-STORE'
DEFINE_HWASAN_LOAD_STORE(16)
^
CC: hello. min c hello. min c: In the function 'hello. min':
Hello. main. c: 39:3: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
printf("Hello, World: %p!!\n", return_address(0));
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Use always_inline_function instead of inline, inline does not take effect
2. Activate Kasan acceleration by 1/7
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. The shadow area of global variables is different from heap
2. This modification has little impact on performance under O3 optimization
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
The following situations cannot be detected by Kasan:
On a 32-bit machine, only 12 bytes were poisoned, but 13 bytes were accessed. Due to the lack of upward alignment, only 3 bits were detected
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
