Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be mounted by Nsh.
etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.
But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.
changes:
- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
in boards, and no need declaration for romfs_img/romfs_img_len.
This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:
- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
in board/arch/board/board/src.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Support longest prefix match routing described as "Longest Match" in
RFC 1812, Section 5.2.4.3, Page 75.
Introduced `prefixlen` to indicate the prefix length of currently
founded route, and only looks up for longer prefix in all later steps.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
If we only enable one of `CONFIG_NET_ARP_SEND` and
`CONFIG_NET_ICMPv6_NEIGHBOR`, both IPv4 and IPv6 traffic will send
ARP or NDP, which causes problem.
Example:
`CONFIG_NET_ARP_SEND=n`
`CONFIG_NET_ICMPv6_NEIGHBOR=y`
Wrong:
IPv4 traffic (`PF_INET`) goes into `icmpv6_neighbor`, which
definitely causes problem.
Correct:
IPv4 traffic doesn't call anything, IPv6 traffic calls `icmpv6_neighbor`
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
changes:
- under boards/risc-v/k230/canmv230/scripts/:
- Make.defs add POSTBUILD actions
- ld-flat.script minor reformating
- ld-kernel.script minor reformating
- under boards/risc-v/k230/canmv230/src/:
- Makefile add clean of generated ROMFS source
- canmv_init.c use `ferr` and drop too late runtime warning
- romfs_stub.c use const for romfs_img_len
The POSTBULD actions can warn stub ROMFS usage at build time, thus
the too late warning in canmv_init.c can be removed.
The cleaning of `libboard.a` in POSTBUILD can also ensure real ROMFS
is in use, as some times weak_data is still in use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The length of some config elements are not equal to 1,2,4,8, so we can't
assert in virtio_mmio_config_read/write() direclty when length != 1,2,4,8
For example, in virtio_net_config from virtio spec v1.2
struct virtio_net_config {
u8 mac[6];
le16 status;
le16 max_virtqueue_pairs;
le16 mtu;
le32 speed;
u8 duplex;
u8 rss_max_key_size;
le16 rss_max_indirection_table_length;
le32 supported_hash_types;
};
The mac length is 6 and not equal to 1,2,4,8
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Note: This implementation is a bit more relaxed than what we do for
non-cmake builds. Mainly because I'm not familiar enough with cmake
to mirror what the non-cmake version does.
Otherwise, it produces a lot of warnings like:
```
ld: warning: object file (/Users/yamamoto/git/nuttx/nuttx/build/libs/libxx/liblibcxx.a(d2s.cpp.o)) was built for newer macOS version (12.7) than being linked (12.0)
```
The mach-o support of objcopy is fragile at best and often results
in a broken output. It's better not to rely on it.
This matches what the non-cmake version does.
Current LITEX_LAST_IRQ looks like a typo that blocks compilation of
`arty_a7/knsh` configuration.
This fixes the build but I have no such device for test.
Found it was LITEX_IRQ_LAST before commit #ee84ea3 so likely typo was
introduced by then.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Add ARCH_CHIP_QEMU_TRUSTZONE to enable/disable the TrustZone
support beacause qemu also support enable/disable Arm Security
Extensions: https://qemu-project.gitlab.io/qemu/system/arm/virt.html
when launch.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Not found the mmio device is a normal case, so should not print the
error log.
This commit change the log level to info when not found the mmio
device.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Follow the posix standard:
If no messages are available to be received and the peer has
performed an orderly shutdown, recv() shall return 0.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
When peer->lc_cfpcount == LOCAL_NCONTROLFDS,
Line 122: peer->lc_cfps[peer->lc_cfpcount++] = filep2; access
out-of-range
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
The lowest bit of the thumb instruction is 1 by default, which is used to distinguish arm instructions and thumb instructions.
Fixed the problem of misalignment of symbol table when performing binary search
In arm, the lowest bit of the instruction is 1, which is a thumb instruction, and 0, which is an arm instruction.
The nm command was used in mkallsym.sh before, and the result it will return will set the lowest bit of the thumb instruction to 0. There will be a one-byte deviation during binary search, so mkallsyms.py will also set the lowest bit to 0 according to the previous format.
```sh
arm-none-eabi-nm -Cn nuttx | grep hello
0801c384 T hello_main
arm-none-eabi-objdump nuttx -t |grep hello
0801c384 g F .text 0000004c hello_main
arm-none-eabi-readelf nuttx -s |grep hello
4558: 0801c385 76 FUNC GLOBAL DEFAULT 1 hello_main
```
However, in the following case, when you need to find the function address according to the symbol name and execute the corresponding function, the lowest address obtained is 0. It will follow the arm instruction, causing an exception.
```c
void sym_test(void)
{
printf("call sym_test\n");
}
int main(int argc, FAR char *argv[])
{
FAR void *addr = sym_test;
printf("sym_test:%p %pS\n",addr, addr);
printf("sym_test - 1: %pS\n", (char *)addr - 1);
printf("sym_test + 1: %pS\n", (char *)addr + 1);
size_t size;
void (*func)(void);
const struct symtab_s *sym = allsyms_findbyname("sym_test", &size);
printf("sym_test:%p %pS\n",sym, sym);
func = sym->sym_value;
func();
return 0;
}
```
Therefore, you need to change mkallsyms.py back to the correct result and correct the binary search.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
The implementation of the RISC-V Timer for BL808 SoC is incomplete. This PR implements the BL808 RISC-V Timer by calling OpenSBI. The code is derived from NuttX for RISC-V QEMU.
The implementation of `up_timer_initialize` with OpenSBI is explained in this article: https://lupyuen.github.io/articles/nim#appendix-opensbi-timer-for-nuttx
This tries to mirror the following change.
```
commit c260fee516
Author: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Date: Tue Aug 31 14:47:13 2021 -0300
libs/libxx: Enforce RTTI for building libcxxabi
It is okay for the application to be built without RTTI (-fno-rrti), but
libcxxabi requires RTTI at least for the library.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
```
the patch has been removed in the following change.
```
commit 4f90a6140c
Author: Stuart Ianna <stuart.ianna@motec.com.au>
Date: Mon Jan 23 09:08:00 2023 +1100
libcxx: Remove exiting patches and update libcxx version to 15.0.7
- Add __config_site for NuttX.
In libcxx 12.0.0. CMake concatenated __config_site with _config,
which enabled NuttX to build without its inclusion. In 15.0.7, this
file is configured by CMake and included explicitly in __config.
- Add additional include directories.
- Mute always_inline warning.
- Make the download of libcxx/libcxxabi configurable
```
