sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
42,889 Commits 1 Branch 0 Tags 291 MiB
f2c2323642
Commit Graph

42889 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Abdelatif Guettouche
6526966987 tools/ci/cibuild.sh: Update the downloaded ESP Xtensa toolchain. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-24 18:17:22 -03:00
Gustavo Henrique Nihei
c23986ec63 xtensa/esp32: Select ARCH_HAVE_BOOTLOADER for ESP32 chips 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-24 10:48:19 -07:00
Gustavo Henrique Nihei
86518bdf25 tools: Trigger clean_bootloader on distclean for supported chips 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-24 10:48:19 -07:00
chao.an
1b5d6aa068 net/local: add socket message control support 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-24 08:09:28 -07:00
chao.an
ea82a0b638 net/local: add local_peerconn helper 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-24 08:09:28 -07:00
chao.an
1e078795fb net/local: split the waiter node from lc_node 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-24 08:09:28 -07:00
chao.an
1ba922a826 net/local: replace the listener list to global 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-24 08:09:28 -07:00
Jani Paalijarvi
b7a5b248e0 Add support for MT25Q1G SPI NOR 2021-09-24 01:09:51 -07:00
zhuyanlin
a41f92d1f6 sched:tcb_s:rearrange sched_priority/int_priority to word align 
As pid_t is uint16_t,this could save space for many archs.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-09-23 23:08:51 -07:00
chao.an
c132e5bed4 net/tcp: sanity check for the listen address 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-23 23:07:57 -07:00
Gustavo Henrique Nihei
4ac3044cc3 xtensa/esp32: Enable build system to download or build bins from source 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-23 20:52:25 -07:00
Gustavo Henrique Nihei
8816f21ba2 tools: Add new make targets for handling bootloader-related operations 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-23 20:52:25 -07:00
chao.an
5a2510d48d net/dup: only start tcp monitor on INET domain 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-09-23 19:02:03 -07:00
Sara Souza
9c2c5d3919 risc-v/esp32-c3: fix pid initiatialization on esp32c3_rt_timer.c 
pid variable was initialized to -EINVAL to prevent rt_timer_deinit
from delete an invalid kthread. But priv->pid was being overwritten in the
rt_timer_init, so in case of failure to create a kthread, it would
call rt_timer_deinit with a non expected initialization value.
 2021-09-23 19:01:27 -07:00
Sara Souza
d0e7d7b77f risc-v/esp32-c3: Remove _s of non static variables from esp32c3_rt_timer.c 2021-09-23 19:01:27 -07:00
Abdelatif Guettouche
f2f2040c44 esp32_spiram/psram/himem: Add and fix the files' sections. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Abdelatif Guettouche
3d8a6fb676 esp32_spiram.c: Remove esp_himem_reserved_area_size from esp32_spiram.c 
file.  This function is already defined in esp_himem and is used only
when that file is built.  We don't need another weak function.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Abdelatif Guettouche
2834d2a46f esp32_spiflash.c/esp32_spiram.c: Remove some unused macros/functions/variables. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Xiang Xiao
47c60b2de8 arch/arm: Remove -march and -mtune 
since -mcpu is enough https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58869

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-23 11:48:11 +02:00
Jari van Ewijk
bbb2f1f8c7 S32K1XX: Add LPI2C slave support 2021-09-22 19:36:34 -07:00
Sara Souza
962059f843 xtensa/esp32-s2: Adds oneshot device driver support 2021-09-22 22:53:54 -03:00
David Sidrane
6d299ce802 stm32h7:DMA_TRBUFF is DMA_SCR_TRBUFF 2021-09-22 22:48:10 -03:00
Sara Souza
fba6fa2dc1 xtensa/esp32-s2: Adds support to rt_timer and systimer to ESP32-S2. 2021-09-22 17:18:24 -03:00
Pedro Bertoleti
64e8322974 Add LCD backpack support for ESP32 (devkit-c). 2021-09-22 16:58:36 -03:00
Sara Souza
2cd4f4af79 xtensa/esp32-s2: Adds freerun timer wrapper 2021-09-22 09:38:10 -03:00
FASTSHIFT
f3477a86d2 libc/string: add lib_strchrnul. 2021-09-22 09:20:06 -03:00
Gustavo Henrique Nihei
e651ef0969 arch/risc-v: Remove CODE qualifier for RISC-V-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
06f4ee850a arch/risc-v: Remove FAR qualifier for RISC-V-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
e9c17c9332 risc-v/rv32m1: Fix wrong position for ++ operator on serial driver 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
eca1f86294 arch/xtensa: Remove CODE qualifier for Xtensa-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
e13dd7dab9 arch/xtensa: Remove FAR qualifier for Xtensa-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
58f87ef443 xtensa/esp32: Fix wrong position for ++ operator on I2C driver 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Jari van Ewijk
e5f17f6604 S32K1XX: Add FlexIO registers 2021-09-22 03:15:42 -07:00
David Sidrane
a9ff808dd1 stm32xx:sdmmc/sdio remove redundant GPIO config 
The stm32_gpiosetevent calls stm32_configgpio. So
   the pin is infact restored to the SDMMC/SDIO D0.

   The seconday init, dropped interrupts in a debug
   build with HW stack checking on after the GPIO glich
   fixes and that was how it was detected.
 2021-09-21 18:25:16 -07:00
David Sidrane
a8d5f21f81 stm32H7:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source.
 2021-09-21 18:25:16 -07:00
David Sidrane
5e19ebb818 stm32F7:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source.
 2021-09-21 18:25:16 -07:00
David Sidrane
d5e306e6f3 stm32:Etablish device before enabling outputs 
This prevents gliches on changing to an output mode.
   If not the ALT mux can be selecting a IP block that
   is drving the line to say 0. Then the output is connected
   to that source, then swithced to the correct source. This
   produced a 430 nS glich on a F4 @168 Mhz. It was a enough
   to corrupt an I2C device with a bus monitor.
 2021-09-21 18:25:16 -07:00
Sara Souza
0504e1d5f6 esp32-devkitc/wifinsh: Adds missing dependency on defconfig 2021-09-21 15:16:47 -03:00
Jari van Ewijk
107e80b61f UCANS32K146 board: s32k1xx_userleds.c style fix 2021-09-21 07:22:06 -07:00
Jari van Ewijk
4b24eca0cf S32K1XXEVB boards: Fix RGB LED output and add comments 2021-09-21 07:22:06 -07:00
Sara Souza
fc12d6888b risc-v/esp32-c3: Group static variables into a struct and prevent an unitialized thread to be deleted 2021-09-21 15:45:59 +02:00
Alan C. Assis
f9b322567c boards/esp32c3: Remove "return ret" from bringup 2021-09-21 10:34:55 -03:00
Alan C. Assis
7edb39f880 boards/esp32: Remove "return ret" from bringup function 
During the lcd1602 tests on our internal CI we noticed that the
lcd1602 was failing because there is not a I2C display in the
emulated board on QEMU. It is better to remove the "return ret"
from the bringup because the user will see the error anyway.
 2021-09-21 10:34:55 -03:00
P.Brier
35824b449a Added CONFIG_ETH0_PHY_DP83825I to imxrt_enet: make driver compile for teensy 4.1 (link detection needs more checks to see if it works as expected) 2021-09-21 10:27:33 -03:00
P.Brier
f9850cf433 Fixed imxrt flexcan driver compilation error due to incorrect scope of variable 2021-09-21 10:00:12 -03:00
Abdelatif Guettouche
0aa4f07e93 libc/sched/sched_backtrace.c: Include unistd.h to avoid warning about 
getpid function.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-21 09:22:28 -03:00
Abdelatif Guettouche
9f4d7e4767 xtensa_dumpstate.c: Fix the name of the TCB variable when dumping the 
backtrace.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-21 09:22:28 -03:00
Xiang Xiao
1692aa7894 drivers/syslog: Ensure the buffer zero terminate 
This patch fix the regression by:
commit 174b240325
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date:   Fri Sep 17 11:56:21 2021 +0800

    drivers/syslog: Call up_puts in syslog_default_write instad up_putc

    since some drivers(e.g. semihosting) have more fast implementation.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-21 08:44:44 -03:00
Alexander Lunev
4ac7945676 net/devif/devif_callback.c: made the connection event list doubly linked. 
The resulting time complexities are as follows:
* devif_callback_alloc() time complexity is O(1) (i.e. O(n) to fill the whole list).
* devif_callback_free() time complexity is O(1) (i.e. O(n) to empty the whole list).
* devif_conn_event() time complexity is O(n).
 2021-09-21 03:51:06 -07:00
iceaway
beba1056a8 userleds: add missing include (stdbool.h) 
Would not compile without stdbool.h included (uses the bool type in
the header file)
 2021-09-20 02:01:47 -07:00