sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,325 Commits 1 Branch 0 Tags 291 MiB
f3392e0a6c
Commit Graph

3694 Commits

Author SHA1 Message Date
Gregory Nutt
f3392e0a6c drivers/serial: Add a timeout to uart_tcdrain(). Even if tcflush() is used to discard buffered data, the close() can still hang if (a) hardware flow control is enabled, (b) CTS == 1, and (c) there is data stuck in the hardware Tx FIFO. tcflush() does not currently clear the MCU serial drivers' hardware Tx FIFOs. This is a workaround for that. 2018-05-27 11:39:34 -06:00
Gregory Nutt
9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories. 2018-05-19 16:46:21 -06:00
Gregory Nutt
2366c13f87 include/nuttx/fb.h: Fix a type _BEND -> _BLEND 2018-05-18 13:36:58 -06:00
Gregory Nutt
c84342d357 include/nuttx/video/fb.h: No, I was right the first time. sys/types.h is needed in some inclusion contexts. 2018-05-18 08:21:08 -06:00
Gregory Nutt
d813c867aa include/nuttx/fb: Last change was wrong. It was not a missing header. It was just a dumb typo. 2018-05-18 08:03:48 -06:00
Gregory Nutt
eaa1570fba include/video/fb.h: Use of size_t requires inclusion of sys/types.h 2018-05-18 07:50:10 -06:00
Gregory Nutt
8b0b7636a8 include/nuttx/video/fb.h: Make type used for overlay number consistent; Use standardized types (size_t and fb_coord_t) whenever possible. 2018-05-18 07:24:36 -06:00
Gregory Nutt
af8b1abf73 Merged fboverlay into master 2018-05-17 16:11:09 -06:00
Gregory Nutt
8befa072a5 include/sys/resource.h: Trivial typo fix. 2018-05-13 12:12:49 -06:00
Gregory Nutt
3208e4835e include/sys: Add resource.h 2018-05-13 10:59:49 -06:00
Gregory Nutt
4a9a421c34 Back out part of f4bcaa4fc2dc2f06d5632d3b74f43c25a6e7e845.If CONFIG_ARCH_IDLE_CUSTOM is defined, then it should not use the version of lc823450_idle.c in arch/arm/src/lc823450. That part was correct before the PR. If CONFIG_ARCH_IDLE_CUSTOM, then the build should use a custom IDLE loop in the board src/ directory. 2018-05-11 06:26:01 -06:00
Gregory Nutt
024364eeef Clean up some spacing in the last commit... Seemed like a good idea at the time, but it is better to be consisten than better. 2018-05-10 15:59:40 -06:00
Michael Jung
29af41a85f libc/unistd: Initial, minimal implementation of sysconf(). Only sufficient to support the functionality of less standard getdtabilesize(). 2018-05-10 14:08:34 -06:00
Michał Łyszczek
16ce1552bc /include/nuttx/mtd/configdata.h: Fix copy-paste comment in configdata.h 2018-05-08 09:09:47 -06:00
Anthony Merlino
b1275abd4b Merged in antmerlino/nuttx/ina3221 (pull request #636) 
drivers/sensors: Adds support for INA3221 power sensor. This has a 3 channel bus/shunt voltage pairs.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:29:59 +00:00
Gregory Nutt
cd12ea7788 Costmetic changes from review of last PR. 2018-05-02 16:29:22 -06:00
Anthony Merlino
385d4a9108 Merged in antmerlino/nuttx/rgb_multichan (pull request #635) 
drivers/rgbled: Adds support for multichannel PWM (multiple PWM channels on a single timer)

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-05-02 22:21:49 +00:00
Michael Jung
121211f096 progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical. 2018-05-01 06:23:52 -06:00
Gregory Nutt
fd844f8eac include/nuttx/wireless/bluetooth: Move Bluetooth header files from include/nuttx/wireless to include/nuttx/wireless/bluetooth for symmetry with other wireless technologies. 2018-04-29 12:43:09 -06:00
Gregory Nutt
f5d0fc7447 fs/vfs and net/udp: Repartition logic of commit 0c963449d6, moving into net/udp. Add support to handle connected UDP sockets. The correct 'optimal blksize' to return is the MSS. The MTU is always too big. 2018-04-27 08:36:25 -06:00
Gregory Nutt
47bf3376d1 Costmetic changes to README and to comments. 2018-04-26 22:00:11 -06:00
hhuysqt
144e335b85 drivers/wiresless/ieee80211: Correct some initialization problems with BCM43362 chip. Adds BCM43428 support. arch/arm/src: Add support for SDIO card to SDIO driver. 
Squashed commit of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    include/nuttx/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    drivers/wireless/ieee80211:  Cosmetic, coding standard changes from review of last merge.
    configs/photon:  Cosmetic, coding standard changes from review of last merge.
    arch/arm/src/stm32:  SDIO changes from last review:  Fix a few long lines and other coding standard issues; Make additions for SDIO card support dependent on a configuration option.

Author: hhuysqt <hyq9606@126.com>
    Return IEEE 802.11 MAC address just as ethernet does
    Modifyed bcmf_board_setup_oob_irq declaration
    Modified OOB ISR function types
    Add some logic according to WICED SDK
    Bug fixed: data_offset counts in 4-bytes
    Add BCM43438 logic for future developement
    Add tips on using telnet
    Use SDIO in-band interrupt instead of OOB interrupt, because Photon seems to unconnect the OOB interrupt line...
    add SDIO in-band interrupt logic
 2018-04-26 08:10:23 -06:00
Pelle Windestam
0c963449d6 fs/vfs: Added support for checking if a descriptor is a socket in fstat(). 2018-04-26 06:49:13 -06:00
Gregory Nutt
10d99cc6e6 include/nuttx/wireless: Add a setbaud() method to the HCI UART lower half interface that can be used to change the default BAUD selection. arch/arm/src/stm32: Implement the setbaud() method for the STM32 HCI UART. 2018-04-25 13:09:08 -06:00
Gregory Nutt
091e3f732e net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html 2018-04-25 08:43:38 -06:00
Gregory Nutt
f188b35707 Update some comments. 2018-04-22 07:36:39 -06:00
Gregory Nutt
555c6112bc include/nuttx/wireless: Clean-up/improvement of some IOCTL definitions. 2018-04-21 09:44:35 -06:00
Gregory Nutt
5a8a9e3aec wireless/bluetooth: Adds implementation of GATT write IOCTL commands. 2018-04-21 08:55:58 -06:00
Gregory Nutt
87dd2dc16a wireless/bluetooth: Adds implementation of GATT read IOCTL commands. 2018-04-21 08:38:08 -06:00
Gregory Nutt
8aa5b6c6ac include/nuttx/wireless: Add support for the rest of the IOCTL options needed to support apps/wireless/bluetooth/btsak. This is only the IOCTL command definitions. The IOCTL command implementation is still missing. 2018-04-20 09:14:59 -06:00
Gregory Nutt
71b8d408e2 wireless/bluetooth: Add IOCTL commands to support MTU exchange. 2018-04-19 15:51:40 -06:00
Gregory Nutt
2ebe8e99cc wireless/bluetooth: Add support for IOCTL commands to perform GATT discovery and obtain the results. 2018-04-19 11:26:36 -06:00
Gregory Nutt
f27124dfc4 include/nuttx/wireless: Remove bogus name from structure. This was left over from a previous change and had me confused for awhile. 2018-04-19 09:14:48 -06:00
Gregory Nutt
44a5a7e170 wireless/bluetooth: Remove Rx kernel thread. The operation of dispatching messages can be performed just as well on the high and low priority work queue. The network driver operates the low priority work queue so that also integrates better with network frame reception. 2018-04-19 08:52:09 -06:00
Gregory Nutt
d93b22d042 net/sixlowpan: Fix a nasty, byte-ordering/endian-ness problem. The root cause has been found and corrected. And a half dozen or so bandaid fixes were reverted. 2018-04-17 15:34:12 -06:00
Gregory Nutt
5d2c226675 wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface. 2018-04-14 11:33:29 -06:00
Gregory Nutt
fa287e8863 Various fixes/changes from intial testing of the HCI UART on the STM32F4-Discovery board. Re-organized how the Blutetooth network driver is initialized. Added lots of new debug output. Add a new STM32 F4 Discovery configuration for testing the HCI UART. Various fixes to get through initialization (still does not). 2018-04-14 09:23:08 -06:00
Gregory Nutt
d25549ac54 This commit adds a Bluetooth HCI UART lower half driver for the STM32 
Squashed commit of the following:

    arch/arm/src/stm32:  Add Kconfig options needed by the HCI UART.  Various fixes to finally get a clean error free compile with no unexpected warnings.
    arch/arm/src/stm32:  In HCI UART, use spin_lock_irqsave() instead of enter_critical_section() whenever possible.
    arch/arm/src/stm32:  In HCI UART, fix up naming of configurations so that they are unique.  Still needs Kconfig settings.  Modify logic so that there can be multiple HCI UARTs, some supporting DMA and some not.
    arch/arm/src/stm32:  Integrate watermarks and software Rx flow control into the HCI UART driver.
    arch/arm/src/stm32:  Eliminate some HCI UART UART configuration options.  Per the HCI UART spec, the link will b 8 data bits, no parity, 1 stop bit... Always.
    arch/arm/src/stm32:  Trivial cleanup
    arch/arm/src/stm32:  Fixes most initial compilation issues STM32 HCI UART driver.  Still need to set up USART configuration parmeters for HCI UART
    arch/arm/src/stm32:  Completes first cut at STM32 HCI UART driver.
    arch/arm/src/stm32:  Completes most of read logic for HCI UART.  Still needs to be able to block if no read data is available.  Still missing write and flush logic.
    drivers/wireless:    Remove txenable from HCI UART methods.  arch/arm/src/stm32:  Reorganize some structures in HCI UART.
    arch/arm/src/stm32:  Still messaging the HCI uart driver.
    arch/arm/src/stm32:  Some trivial renaming.
    arch/arm/src/stm32:  A little more HCI-UART logic.
    arch/arm/src/stm32:  Initial setup to support HCI-UART.  Little more than the serial driver with some name changes and a few things removed.
 2018-04-13 10:36:23 -06:00
Gregory Nutt
b42d31401c include/nuttx/wireless.h: Fix some coding standard violations. configs/indium-f7: Fix some compile errors found in build testing. 2018-04-12 08:11:55 -06:00
Tiago Almeida
a482867c00 drivers/sensors/max31855: Add multiple max31855 sensors feature and support for bambino-200e and stm32f4discovery 2018-04-09 15:36:27 -06:00
Mateusz Szafoni
195c210535 Merged in raiden00/nuttx (pull request #626) 
add generic upper-half motor driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-09 12:59:28 +00:00
Gregory Nutt
ba07978c2a Trivial update to some comments 2018-04-08 07:29:14 -06:00
Bob Feratich
d893c5b55e This commit adds LSM330 SPI and ADXL372 drivers. 
Squashed merge of the following:

Author: Gregory Nutt <gnutt@nuttx.org>
    drivers/sensors:  Fix some minor typos in last commit that cause some compile problems.
    drivers/sensors/:  Clean up some coding standard isses in LM330 and ADXL372 drivers.
    drivers/sensors/README.txt:  Clean up some long lines and odd line breaks.
    include/nuttx/sensors:  Completes coding style review of adxl372.h, cluster_driver.h, and lsm330.h.

Author: Bob Feretich <bob.feretich@rafresearch.com>
    Add LSM330 SPI and ADXL372 drivers along with the cluster driver infrastructure.
 2018-04-07 14:47:27 -06:00
Matias v01d
1452ed979b include/ and libxx/: Upate .gitignore files. 2018-04-07 07:01:49 -06:00
Gregory Nutt
4fd814982d drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features. 2018-04-06 16:22:49 -06:00
Gregory Nutt
e02bbd945a include/nuttx/wireless: Fix a typo that crept in with the last commit 2018-04-06 11:47:43 -06:00
Gregory Nutt
5009c22f85 wireless/bluetooth: Implementat SIOCGBTINFO IOCTL command. Eliminated some redundancy. 2018-04-06 10:39:12 -06:00
Gregory Nutt
cab7ba8b8f Bluetooth: Better integrate NuttX Bluetooth IOCTL commands and NetBSD IOCTL commands. Stanardize naming. 2018-04-06 09:42:41 -06:00
Gregory Nutt
39e393fa5f net/bluetooth: Since the max header is always reported, the max frame size for purposes of allocation is the max header lenght plus the max payload, even though the frames with the max payload never have the max header length. 2018-04-05 16:40:59 -06:00
Juha Niskanen
6030095fe6 ds28e17.h edited online with Bitbucket 2018-04-05 12:08:56 +00:00