Gregory Nutt
f374e5fde4
Tiva Timer: Revert the previous change. Thre is a better way to handler timerout interrupts.
...
Removed setting of the initial timer interval load value (or, rather, it is always set to zero for a free-running timer). Also, do not unconditional enable the timer out interrupt. The timerout interrupt is not not enabled until tiva_timer32_setinterval() is called.
2015-01-14 07:33:59 -06:00
Gregory Nutt
ef409169fa
Update README
2015-01-13 16:17:07 -06:00
Gregory Nutt
1f24e7e155
Timer Timer: Timer driver now initializes without complaints. Need a test driver of some kind to make more testing progress.
2015-01-13 11:49:00 -06:00
Gregory Nutt
c2a47142e8
DK-TM3C129X Timer: Add timer initialization logic to the board bring-up
2015-01-13 11:10:35 -06:00
Gregory Nutt
f482e6e3db
TM4C123G LaunchPad: Button support from Bradlye Noyes
2015-01-12 21:14:01 -06:00
Gregory Nutt
427e5c98c5
Tive System Control: Add logic to configure the alternatie clock source (ALTCLK). Needed by the Tiva timer module
2015-01-09 14:10:31 -06:00
Gregory Nutt
80c7fa20b9
Update README
2015-01-07 06:23:24 -06:00
Gregory Nutt
57202946a8
DK-TM42129X: Support for the TMP100 temperature sensor is enabled by default in the NSH configuration
2015-01-06 13:23:35 -06:00
Gregory Nutt
4d7efb5865
DK-TM4C129X: Add logic to initialize the TMP-100 temperature sensor driver at startup
2015-01-06 13:23:02 -06:00
Gregory Nutt
524ccad0ba
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
9eda193c39
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
2015-01-05 15:12:45 -06:00
Gregory Nutt
4457727cec
DK-TM4C129X: Enable I2C6 and the I2C tool in the default configuration
2015-01-05 13:40:55 -06:00
Gregory Nutt
a3b32b0545
DK-TM4C129X: The network monitor is no enabled by default in NSH configuration
2015-01-05 12:09:33 -06:00
Gregory Nutt
43824e4725
Tiva Ethernet: Add support for PHY interrupts
2015-01-03 13:16:26 -06:00
Gregory Nutt
a6d128c06a
DK-TM4C129X: Ethernet networking is now enabled by default in the NSH configuration
2015-01-03 10:27:04 -06:00
Gregory Nutt
1b2d2f81cf
DK-TM4C129X: Fix RAM size in defconfig files
2015-01-03 09:44:02 -06:00
Gregory Nutt
af8245c42c
DK_TM4C129X: Add more GPIO pin definitions
2015-01-01 14:16:05 -06:00
Gregory Nutt
e69855eb72
DK_TM4C129X: Add some GPIO pin definitions
2015-01-01 13:55:53 -06:00
Gregory Nutt
7fbd970ed6
TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers
2015-01-01 12:28:46 -06:00
Gregory Nutt
47480b4696
Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done
2015-01-01 07:55:15 -06:00
Gregory Nutt
9c74f502d6
Refresh configuration
2014-12-31 07:32:47 -06:00
Gregory Nutt
db574ef3cb
Remove menuconfig warning
2014-12-31 07:31:49 -06:00
Gregory Nutt
aff4c9cfd0
stm32f429i-disco: change ltdc initializing during boot up. This moves initializing of the ili9341 lcd and ltdc driver to the board specific initializing routine.
...
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:50:36 -06:00
Gregory Nutt
868d4b7afc
STM32F429i-Disco USB: Strangeness: Conditioned on OTGHS but called otgfs initialize routines. Must be something broken
2014-12-29 07:02:32 -06:00
Gregory Nutt
217f3fec70
STM32F429i-Disco USBMC configuration: SPI1 should not be enabled. It is not supported
2014-12-29 07:01:36 -06:00
Gregory Nutt
83b8e15570
Fir STM32v2: Refresh configuration
2014-12-28 18:29:35 -06:00
Gregory Nutt
3089f2e24e
Fire STM32v2: Fix missing stuff in Kconfig file
2014-12-28 18:29:13 -06:00
Gregory Nutt
20b5980828
C5471 EVM: Refresh configurations
2014-12-28 18:15:30 -06:00
Gregory Nutt
9a79849116
Cloudctrl: Add missing configuration logic
2014-12-28 17:51:11 -06:00
Gregory Nutt
78d6c9d21c
Compal e86 NSH: Fix numerous typos in Make.defs
2014-12-28 17:34:59 -06:00
Gregory Nutt
22125246b0
Hymini-STM32v USB MSC: Fix configuration. Needs mountpoint support for USB MSC. Refreshed
2014-12-28 17:12:03 -06:00
Gregory Nutt
febd316186
Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled
2014-12-28 16:55:47 -06:00
Gregory Nutt
d74b28befd
MBED NSH: Should not have CONFIG_SPI_EXCHANAGE in the configuration
2014-12-28 16:39:02 -06:00
Gregory Nutt
de6e8d1852
Freedom-KL25z: Fix breakage from last configuration refresh
2014-12-28 15:23:37 -06:00
Gregory Nutt
6368445671
Mikroe-STM32F4: Refresh one configurations, turning off DEBUG
2014-12-28 14:39:19 -06:00
Gregory Nutt
0c79c319d2
LM3S6965-EK: Refresh one configurations, turning off DEBUG
2014-12-28 14:35:47 -06:00
Gregory Nutt
e847dd1ca0
Freedom KL25Z: Refresh one configurations
2014-12-28 14:30:44 -06:00
Gregory Nutt
21e7606a88
Eagle100: Refresh one configurations, turning off DEBUG
2014-12-28 14:22:11 -06:00
Gregory Nutt
0d33717de4
STM32F429-Disco: Refresh five configurations, turning off DEBUG
2014-12-28 14:04:53 -06:00
Gregory Nutt
06db611676
STM32F40G-EVAL: Refresh two configurations, turning off DEBUG
2014-12-28 13:53:53 -06:00
Gregory Nutt
c1f61b813c
Refresh Configuration
2014-12-26 09:33:20 -06:00
Gregory Nutt
7d06a77555
Update px4fmu-v2_upstream config
2014-12-26 08:40:02 -06:00
Gregory Nutt
9e0483e37c
Fix columnar alignment in Kconfig file. From David Sidrane
2014-12-26 08:37:27 -06:00
Gregory Nutt
9bed954924
Cosmet updates to comments and README files
2014-12-24 08:15:21 -06:00
Gregory Nutt
a322029dbe
DK-TM4C129X: Fix sense of LEDs; active high. Also GPIO for blue and green reversed
2014-12-22 17:41:04 -06:00
Gregory Nutt
b9d0094124
TM4C129X: A small step toward understanding new Tiva clocking
2014-12-22 09:30:41 -06:00
Gregory Nutt
7e5a0f227d
Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3
2014-12-21 15:23:37 -06:00
Gregory Nutt
b6839f5407
Tiva: Add a configuration setting to better distinguish TM4C123 and 129 families. Reanem tm4c_syscontrol.h to tm4c123_syscontrol.h; rename tm4c129x_syscontrol.h to tm4c129_syscontrol.h
2014-12-20 08:38:11 -06:00
Gregory Nutt
56340ae971
STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review
2014-12-19 14:52:17 -06:00
Gregory Nutt
6194fed86b
Stuff that goes along with the new LTDC README file
2014-12-19 14:14:41 -06:00
