Gregory Nutt
|
b1dcacebe7
|
Minor update to a README
|
2015-03-29 07:04:39 -06:00 |
|
Gregory Nutt
|
ce34402dac
|
SAMV71-XULT: netnsh configuration is back to -O2
|
2015-03-28 14:54:30 -06:00 |
|
Gregory Nutt
|
d2fd139ebc
|
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
|
2015-03-28 13:09:01 -06:00 |
|
Gregory Nutt
|
d7dbdfef58
|
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
|
2015-03-28 09:42:45 -06:00 |
|
Gregory Nutt
|
756d19ff28
|
SAMV71-XULT: Add a network-enabled NSH configuration
|
2015-03-27 14:18:13 -06:00 |
|
Gregory Nutt
|
79734c3c13
|
SAMV7 Ethernet: Fix some errors in circular queue handling
|
2015-03-27 13:04:43 -06:00 |
|
Gregory Nutt
|
66670c1738
|
SAMV7 Ethernet+USB Updates
|
2015-03-27 10:47:03 -06:00 |
|
Gregory Nutt
|
3c433f7f35
|
Updated comments/README
|
2015-03-26 12:33:03 -06:00 |
|
Gregory Nutt
|
dd06cef845
|
SAMV7 USB: more updates
|
2015-03-25 15:56:10 -06:00 |
|
Gregory Nutt
|
3875e86436
|
SAMV7: Add framework for USB DCD. Initial check-in is just the SAMA5 USB DCD with naming changes to get a clean compilation. Needs careful review and comparison with datasheet and, of course, testing
|
2015-03-23 14:06:53 -06:00 |
|
Gregory Nutt
|
8712f8b587
|
Refresh Configuration
|
2015-03-20 17:45:10 -06:00 |
|
Gregory Nutt
|
6156d5f2fe
|
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
|
2015-03-19 14:53:05 -06:00 |
|
Gregory Nutt
|
dd50e03666
|
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
|
2015-03-18 17:23:40 -06:00 |
|
Gregory Nutt
|
6763128345
|
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
|
2015-03-18 15:55:00 -06:00 |
|
Gregory Nutt
|
480bb3c395
|
Cosmetic update to README
|
2015-03-17 17:10:44 -06:00 |
|
Gregory Nutt
|
714af6ebb8
|
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
|
2015-03-17 14:29:41 -06:00 |
|
Gregory Nutt
|
32aadd9cc2
|
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
|
2015-03-16 13:51:37 -06:00 |
|
Gregory Nutt
|
f60f22258a
|
Trivial update to FAT, comments, README
|
2015-03-15 15:06:17 -06:00 |
|
Gregory Nutt
|
28ead380ea
|
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
|
2015-03-15 12:17:39 -06:00 |
|
Gregory Nutt
|
ccc19408f2
|
Update README files
|
2015-03-15 10:22:14 -06:00 |
|
Gregory Nutt
|
85b9a7f1a5
|
SAMV7: Costmetic changes to SDRAM logic
|
2015-03-14 13:58:34 -06:00 |
|
Gregory Nutt
|
3b0615ece8
|
SAMV7: More SDRAM logic. It does still does not work
|
2015-03-14 13:27:00 -06:00 |
|
Gregory Nutt
|
cc497202ed
|
SAMV71-XULT: Add support for SDRAM (unverified)
|
2015-03-14 11:00:46 -06:00 |
|
Gregory Nutt
|
d5377842ea
|
SAMV7-XULT: Build support for SDRAM (SDRAM init still missing)
|
2015-03-14 09:16:27 -06:00 |
|
Gregory Nutt
|
361d4a3fac
|
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
|
2015-03-13 09:27:16 -06:00 |
|
Gregory Nutt
|
4580af6d0b
|
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
|
2015-03-12 18:03:41 -06:00 |
|
Gregory Nutt
|
743fd5ac50
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
Gregory Nutt
|
b4b59f928f
|
Minor update to README
|
2015-03-12 13:43:54 -06:00 |
|
Gregory Nutt
|
da3233a527
|
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
|
2015-03-12 12:27:06 -06:00 |
|
Gregory Nutt
|
90bc4b81ee
|
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
|
2015-03-11 14:41:58 -06:00 |
|
Gregory Nutt
|
1a68ee6824
|
Update README
|
2015-03-11 12:32:00 -06:00 |
|
Gregory Nutt
|
ca8165dd10
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
Gregory Nutt
|
da844f1a88
|
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
|
2015-03-11 12:16:27 -06:00 |
|
Gregory Nutt
|
508d96b571
|
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
|
2015-03-11 11:23:19 -06:00 |
|
Gregory Nutt
|
e2a6b7f5b0
|
SAMV7-XULT: Switch back to the CodeSourcery tools
|
2015-03-11 10:24:43 -06:00 |
|
Gregory Nutt
|
834072815b
|
SAMV71-XULT: Some bugfixes from early bring-up work
|
2015-03-10 16:11:28 -06:00 |
|
Gregory Nutt
|
4c6057eca1
|
mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin
|
2015-03-10 09:42:35 -06:00 |
|
Gregory Nutt
|
36e88e504a
|
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
|
2015-03-10 07:50:32 -06:00 |
|
Gregory Nutt
|
1b4e32ef20
|
Update README
|
2015-03-09 19:58:59 -06:00 |
|
Gregory Nutt
|
d3033efa9c
|
Cortex-M7: Add cache operations
|
2015-03-09 15:41:48 -06:00 |
|
Gregory Nutt
|
cfca6b08c5
|
SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file
|
2015-03-09 08:23:09 -06:00 |
|
Gregory Nutt
|
2cb3c03678
|
SAMV7: Add serial driver
|
2015-03-08 10:15:42 -06:00 |
|
Gregory Nutt
|
3f35f7ff07
|
SAMV7-XULT: At 3.3V/300MHz, FLASH should require only 4 wait states
|
2015-03-08 08:41:35 -06:00 |
|
Gregory Nutt
|
967e8bbc7b
|
SAMV71-XULT: Add heap allocation logic
|
2015-03-07 11:46:54 -06:00 |
|
Gregory Nutt
|
1b193454d7
|
SAMV7-XULT: Disable networking for now
|
2015-03-07 11:21:22 -06:00 |
|
Gregory Nutt
|
e2b7dde641
|
SAMV71-XULT: Switch to the devkitARM toolchain
|
2015-03-07 11:15:49 -06:00 |
|
Gregory Nutt
|
b3403dee6a
|
SAMV7: Add basic clock and timer ISR configuration logic
|
2015-03-07 10:32:47 -06:00 |
|
Gregory Nutt
|
4e516beccf
|
SAMV71-XULT: Add linker scripts
|
2015-03-06 12:46:12 -06:00 |
|
Gregory Nutt
|
36d161fc2b
|
SAMV71: More updates on the way to a clean build. Still more to do to complete that journey
|
2015-03-06 12:13:09 -06:00 |
|
Gregory Nutt
|
4cde63eead
|
Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71.
|
2015-03-06 10:53:57 -06:00 |
|
Gregory Nutt
|
d18ed4569c
|
Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress.
|
2015-03-06 08:56:44 -06:00 |
|