Commit Graph

54 Commits

Author SHA1 Message Date
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
9da3d4a2a9 drivers/lcd and configs/olimex-lpc1766stk: Remove support for the Nokia6100 LCD. That LCD uses a 9-bit SPI interface (the 9th bit being the command/data bit that is normally a discrete). That communication was never successfully integrated. I now believe that it would would require some special support from the low-level, MCU SPI driver to manage that 9th bit. The deleted code is still available in the Obsoleted repository in the nuttx/drivers/lcd, nuttx/configs/olimex-lpc1766stk, and Patches directories. 2018-05-19 16:46:21 -06:00
Gregory Nutt
73c107e1fb Squashed commit of the following:
drviers/lcd/ft80x:  No longer depends on CONFIG_EXPERIMENTAL
    Update README.txt
2018-03-10 10:15:32 -06:00
Gregory Nutt
8fe9e81183 drivers/lcd: Add FT80x controls for the case where the audio amplifier is controlled by FT80x GPIOs vs MCU gpios. 2018-02-27 08:45:34 -06:00
Gregory Nutt
758e94f7a7 drivers/lcd: Add FT80x interrupt framework. Interrupts are still not used by the driver. 2018-02-17 16:36:11 -06:00
Gregory Nutt
6a405ead67 This commit adds a barbones FTDI FT80x driver. It is untested (I don't even have hardware yet and, hence, it is marked as EXPERIMENTAL
Squashed commit of the following:

    drivers/lcd:  Finishes off basic FT80X.  Still missing some niceties.
    drivers/lcd: Rethink FT80X display list interface.
    drivers/lcd:  More FT800x display list logic.  Still not complete.
    drivers/lcd:  Add some basic FT80x initialization logic.
    drivers/lcd:  Add ft80x display list IOCTL framework.  Still missing low level display list operations.
    drivers/lcd:  FT80x driver cannot be a standard LCD driver but must, instead, be a custom character driver.
    drivers/lcd:  Add FT800 co-processor commands and display list helpers.
    drivers/lcd:  Add SPI interface and framework for the initialization and the basic LCD driver.
    drivers/lcd:  Add beginnings of some FT80x implementation.
    drivers/lcd:  Add definitions for the FTDI FT801 part
    include/nuttx/lcd/ft800.h:  Add initial FT800 interface definition.
    drivers/lcd:  Add ft800 header file.
2018-02-17 11:59:07 -06:00
Gregory Nutt
4a36c946e1 Trivial update to some comments. 2018-02-12 14:46:40 -06:00
Alan Carvalho de Assis
1247828e74 drivers/lcd: Fix the default I2C address of SSD1306 OLED display (7- vs 8-bit addressing) 2018-02-11 16:56:20 -06:00
Gregory Nutt
642d7e3ce2 Squashed commit of the following:
configs/flipnclick-pic32mz:  Add an nxlines configuration for use in testing the custom HiletGo Click board.
    arch/mips/src/pic32mz:  Correct some SPI-related typos.  configs/flipnclick-pic32mz: Finishes integration of HiletGo OLED. drivers/lcd:  Finish support for HiletGo OLED.
    drivers/lcd:  Add configuration support for HiletGo OLED.  configs/flipnclick-pic32mz:  Add board support for HiletGo OLED.
2018-02-10 09:43:12 -06:00
Gregory Nutt
54f43ea1f1 Fix typos in Kconfig files: LCD_PACKEDMSFIRST, not LCD_PACKEDFIRST. 2017-11-26 07:57:17 -06:00
Gregory Nutt
c2c2c4f111 drivers/lcd: Make LCD driver configuration indepently selected from NX graphics configuration. This makes things awkward and loses some error checking but is a necessary step in order to make LCD drivers usable when the NX graphics system is disabled. 2017-11-25 13:13:30 -06:00
Gregory Nutt
3657723208 drivers/lcd: Add support for external LCD initialization required by some board logic. configs/zpa214xpa: Tried to get the LCD working again unsuccessfully. Too much bit rot I suppose. 2017-11-25 11:41:21 -06:00
Gregory Nutt
205fe8053f Kconfigs: Add CONFIG_LCD_UPDATE that works like CONFIG_NX_UPDATE but can be enabled without enabling the graphics subsystem. 2017-11-04 14:08:21 -06:00
Alan Carvalho de Assis
829e6520e3 drivers/lcd/max7219.c: Add support to MAX7219 LED Matrix as LCD interface 2017-11-04 07:54:48 -06:00
Gregory Nutt
a9c054237a drivers/lcd: Add suppose for a generic front-end that will convert any LCD driver into a framebuffer driver. 2017-09-17 10:39:23 -06:00
Jussi Kivilinna
310a29227a drivers/lcd: add DD-12864WO-4A/SSD1309 support to SSD1306 driver 2017-08-22 08:32:52 -06:00
Alan Carvalho de Assis
8df5c29857 Add driver for Nokia 5110 (Philips PCD8544) 2017-05-26 10:53:13 -03:00
Masayuki Ishikawa
591f91ebd3 drivers/lcd/st7565.c: Extend to include support for the AQM_1248A 2017-03-21 15:30:23 +09:00
v01d
21e930cdba SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes 2016-08-13 19:20:20 -03:00
Gregory Nutt
d76d889efd Restore FLASH_ERASALL in configurations where it was previously selected 2016-06-03 09:10:21 -06:00
Gregory Nutt
e57a6d14c3 lcd/Kconfig, Make.defs: Remove dependency of CONFIG_LCD_NXDRIVER for building non-graphic, SLCD drivers. 2016-05-26 07:21:14 -06:00
Dave
dc1c27cee7 * This driver supports the 'I2C lcd backpack' design that is based on the PCF8574 io expander. There's a myriad of different vendors of such, but they are principally the same, save wiring and minor features like jumpers for I2C addresses. This driver supports known and unknown variants.
*  The interface board supports HD44780-based LCD modules up to 4x32, and this driver accommodates all those formats.
2016-05-25 08:06:32 -06:00
Pierre-noel Bouteville
59e5e2f5cc drivers/lcd/st7565.c: Extend to include support for the ERC12864-3. From Pierre-noel Bouteville 2015-10-07 14:30:08 -06:00
Paul A. Patience
c080146748 SSD1351 driver: add 8-bit parallel interface 2015-09-06 13:28:28 -04:00
Paul A. Patience
01b68e90d0 Add SSD1351 OLED controller support 2015-08-28 18:37:01 -04:00
Alan Carvalho de Assis
a3e24a0b6c Modify the SSD1306 LCD driver to support either the SPI or I2C interface. From Alan Carvalho de Assis, 2015-07-15 11:21:54 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
a8a3790139 RA8875 LCD driver contributed by Marten Svanfeldt 2015-04-24 07:46:03 -06:00
Gregory Nutt
8d00912207 Add mirror (x/y) and inverse video (black<->white) options to the ST7565 LCD driver. From Pierre-noel Bouteville. 2014-11-15 06:43:12 -06:00
Gregory Nutt
3576e249b5 Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville. 2014-11-13 16:03:52 -06:00
Gregory Nutt
fa3753c466 rivers: enable usage of ili9341
This enables build and configuration of the ili9341 lcd interface driver.

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-10-20 15:27:56 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
a37c158659 Add missing MIO283QT-9A to the drivers/lcd/Kconfig 2014-03-27 07:38:02 -06:00
Gregory Nutt
86d7618733 configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 08:28:49 -06:00
Gregory Nutt
9fd85aec9e configs/olimex-lpc1766stk/nx converted to use the kconfig-frontends 2014-03-02 12:26:52 -06:00
Gregory Nutt
45d2bf2554 Support for Sharp Memory LCD. From Librae 2013-12-23 16:03:54 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
84b2c77a63 configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit 2013-05-07 14:34:09 -06:00
Gregory Nutt
3f52b0fbb6 Yet more kconfg2html logic 2013-04-20 17:29:10 -06:00
patacongo
5e9fb81e0d Add an ST7567 LCD driver for ZKIT-ARM-1769
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5772 42af7a65-404d-4744-a932-0658087f49c3
2013-03-22 14:30:54 +00:00
patacongo
9bb950da29 STM32 OTG FS fix from Petteri Aimonen; Finish off some UG-2864AMBAG01 test logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5322 42af7a65-404d-4744-a932-0658087f49c3
2012-11-08 14:10:24 +00:00
patacongo
3ad2d7abe7 Add driver for Univision UG-2864AMBAG01
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5319 42af7a65-404d-4744-a932-0658087f49c3
2012-11-07 21:53:14 +00:00
patacongo
2a3aab213e Shenzhou board has an SSD1289 LCD, not ILI93xx
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5194 42af7a65-404d-4744-a932-0658087f49c3
2012-09-26 19:41:54 +00:00
patacongo
e3531087d3 Add more LCD-related Kconfig logic; Create a Kconfig file for NxWidgets
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5189 42af7a65-404d-4744-a932-0658087f49c3
2012-09-25 21:15:02 +00:00
patacongo
c737fc4315 Move duplicate LCD orieations settings from configs/*/Kconfig to drivers/lcd/Kconfig
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5036 42af7a65-404d-4744-a932-0658087f49c3
2012-08-18 22:57:17 +00:00