Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
up_interrupt_context indicates that we self inside interrupt/handler mode,
replaced to private function is_nesting_interrupt to make less confused.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
LD: nuttx
arm-none-eabi-ld: /home/ligd/platform/mainline/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 40 bytes
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:538: nuttx] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 16 bytes
Signed-off-by: zhangshoukui <zhangshoukui@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
These configs are changed based on below rules.
1. always enable +CONFIG_LV_USE_NUTTX=y
2. If touchpad is used, enable +CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
3. enable log by +CONFIG_LV_USE_LOG=y
4. If -CONFIG_LV_MEM_CUSTOM=y previously defined, replace it with +CONFIG_LV_USE_CLIB_MALLOC=y +CONFIG_LV_USE_CLIB_SPRINTF=y +CONFIG_LV_USE_CLIB_STRING=y
5. If -CONFIG_LV_PORT_USE_FBDEV=y, default config is for fbdev. If -CONFIG_LV_PORT_USE_LCDDEV=y, +CONFIG_LV_USE_NUTTX_LCD=y
6. Remove all -CONFIG_LV_TICK_CUSTOM=y -CONFIG_LV_TICK_CUSTOM_INCLUDE="port/lv_port_tick.h"
7. If -CONFIG_LV_PORT_LCDDEV_DOUBLE_BUFFER=y, replace it with CONFIG_LV_NUTTX_LCD_DOUBLE_BUFFER=y. For fbdev, double buffer is automatically detected.
8. If -CONFIG_LV_COLOR_16_SWAP=y, need to upgrade the LCD driver to support hardware byte order swap.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
This patch allows user to simply select which GPIOs he wants to use
and access them via /dev/gpio_a0 or similar device with standard
gpio driver.
By default gpio names match pin names printed on the board. So when
enabling A3 pin, it will show as /dev/gpio_a3 in runtime. This name
can be changed in kconfig.
User can also select pin function (input, output, interrupt) as well
as standard pin settings like, pull up/down, output type
pushpull/open drain etc.
All pins that are exposed via boards goldpins are listed in Kconfig.
Extra pins that are supported by chiip but are not exposed for easy
usage are not listed.
To have this nice Kconfig configuration and for things to be easily
debugable/understandable it requires code to have big Kconfig and
header file with all possible definitions
Because of file sizes I decided to split gpio related kconfig and
header into separate files. Otherwise it would really make original
files hard to read and find anything.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
The DS1307 was used as board specific, but it is better move it to
stm32/common to be easily used by other boards as well.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
