sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
41,038 Commits 1 Branch 0 Tags 291 MiB
f878390c6d
Commit Graph

41038 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Byron Ellacott
1105cf0669 ez80: fix several bugs in emac driver 
IRQs cannot be individually disabled on the eZ80, so using
`up_disable_irq()` had no effect. This left the IRQ handler being
constantly triggered without the lower half handler running.

The macro for EMAC stats was incompatible with Clang. The simplified
form gives identical results under ZDS-II.

The MII clock speed must be set before trying to read MII registers.
It's now done before resetting the PHY using the Mode Control Register.

MII initialization waited on the auto-neogotiate restart bit being set
but PHY hardware is frequently fast enough to have cleared the bit
before the first read of it. It now instead just waits on auto-negotiate
completing. The MII poll loop now uses `up_mdelay` because it was far
too fast at 50MHz using a busy loop, giving time for a link to be
established.

Bad packets are now processed enough to release their buffers back to
the EMAC hardware.

A few typos, unused variables, and other miscellaneous issues were also
fixed.
 2021-02-26 03:25:58 -06:00
Michal Lenc
04fc5e314d arch/arm/src/imxrt: updated flexcan driver to support classical and FD frames at once 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-02-25 22:31:04 -08:00
Michal Lenc
3b219fb2da boards/arm/imxrt/teensy-4.x: allow configuration of all CANs 
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-02-25 22:31:04 -08:00
Jiuzhu Dong
48050c9425 signal: set SIGRTMIN to SIGUSR1 because signo 0 don't catch. 
Change-Id: I600fed48d25e19c229aac899508b86ddfebb24f6
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-02-25 22:27:24 -08:00
Abdelatif Guettouche
39016f6d68 risc-v/esp32c3: Configure clock and call board initialize at startup. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-25 22:13:26 -08:00
Gustavo Henrique Nihei
c76e201ebd drivers/i2s: Fix nxstyle issues 2021-02-25 18:57:18 -08:00
Gustavo Henrique Nihei
55d66f60a3 drivers: Fix typos reported by codespell 2021-02-25 18:57:18 -08:00
Gustavo Henrique Nihei
76acb32e29 Fix typos reported by codespell 2021-02-25 11:31:49 -08:00
Gustavo Henrique Nihei
b9f231cdca include: Fix typos reported by codespell 2021-02-25 11:30:38 -08:00
hotislandn
651b905b99 arch:rv64:add API up_copyfullstate for later FPU support. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-02-25 11:26:27 -08:00
Yuichi Nakamura
a556bbf3a4 arm/rp2040: Fix LDFLAGS for boot stage2 2021-02-25 11:25:27 -08:00
Gustavo Henrique Nihei
7fe096c65e risc-v: Fix typos reported by codespell 2021-02-25 16:25:47 +00:00
Gustavo Henrique Nihei
ed0a1b724b xtensa/esp32: Fix typos reported by codespell 2021-02-25 15:02:15 +00:00
Alin Jerpelea
561428fb84 libs: nxstyle fixes 
nxstyle fixes to pass the CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-02-25 01:44:30 -08:00
Alin Jerpelea
88fa869a04 libnx: Author Gregory Nutt: update licenses to Apache 
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-02-25 01:44:30 -08:00
Alin Jerpelea
9dd35d8d83 libcxx: : Author Gregory Nutt: update licenses to Apache 
Gregory Nutt has submitted the SGA and we can migrate the licenses
 to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-02-25 01:44:30 -08:00
Alin Jerpelea
fe9ccffe2b libs: libnx: nxfonts: fix Mixed case identifier 
Fix Mixed case identifier to pass nxstyle CI check

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-02-25 01:44:30 -08:00
hotislandn
30cb7d3983 arch:rv32:up_sigdeliver missing fpu contexts. 
Signed-off-by: hotislandn <hotislandn@hotmail.com>
 2021-02-24 23:42:18 -08:00
YAMAMOTO Takashi
542574acd6 libs/libc/modlib/modlib_init.c: initialize file descriptor with -1 
Use -1 instead of 0 to represent an invalid descriptor
so that modlib_uninitialize doesn't try to close the descriptor 0.
 2021-02-24 23:42:06 -08:00
YAMAMOTO Takashi
bac6b11065 sched/module/mod_insmod.c: Fix a resource leak 
Note: partially initialized loadinfo should be uninitialized.
It can contain an open file descriptor.
 2021-02-24 23:42:06 -08:00
Masayuki Ishikawa
8085010ae8 arch: arm: Add 'select ARM_HAVE_WFE_SEV' to ARCH_CHIP_RP2040 
Summary:
- This commit adds 'select ARM_HAVE_WFE_SEV' to ARCH_CHIP_RP2040
- Now NuttX spinlock uses WFE/SEV to reduce power consumption
- Also, modify a comment on rp2040

Impact:
- rp2040 only

Testing:
- Tested with raspberrypi-pico:smp

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2021-02-24 19:12:22 -08:00
Byron Ellacott
3e3af5b73d net: fix a few DP83848C and DP83825I constants 2021-02-24 19:04:05 -08:00
Nathan Hartman
7c5174a53b arch/stm32f7: Fix nxstyle errors 
arch/arm/src/stm32f7/stm32_config.h,
arch/arm/src/stm32f7/stm32_dma.h,
arch/arm/src/stm32f7/stm32_dma2d.h,
arch/arm/src/stm32f7/stm32_dtcm.h,
arch/arm/src/stm32f7/stm32_dumpgpio.c,
arch/arm/src/stm32f7/stm32_ethernet.h,
arch/arm/src/stm32f7/stm32_gpio.c,
arch/arm/src/stm32f7/stm32_gpio.h:

    * Fix nxstyle errors.
 2021-02-24 22:39:49 +00:00
Yuichi Nakamura
01699e00e0 arm/rp2040: Raspberry Pi Pico SMP support 2021-02-25 07:20:59 +09:00
Jiuzhu Dong
936ce77d21 driver/sensor: gets the capacity of the hardware fifo 
to hold the number of events

Change-Id: I58a9ad07913c7b189e1fd229ab22e91e220e01f6
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-02-24 15:26:15 -03:00
Jiuzhu Dong
46ea549630 driver/sensor: Fetch(with O_NONBLOCK) will directly return. 
when sensor is disable.

Change-Id: I02c02aa447ee0b0d681082b4209ecd36e10f2547
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-02-24 15:26:15 -03:00
Jiuzhu Dong
54ea96da6b driver/sensor: replace lower->buffer_size with lower->buffer_number 
more efficient

Change-Id: I0823b10248caf75e4dd6a5086ad230ba4a7298f6
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-02-24 15:26:15 -03:00
Gustavo Henrique Nihei
6edeb9ebd9 risc-v/esp32c3: Free CPU interrupt if irq_attach fails 2021-02-24 15:56:26 +00:00
Gustavo Henrique Nihei
5c24c98880 risc-v/esp32c3: Invalidate CPU interrupt number after free 2021-02-24 15:56:26 +00:00
Byron Ellacott
41b805813f libc/hex2bin: fix handling of segment offsets 2021-02-24 07:01:45 -08:00
Jiuzhu Dong
142406bd2a builtin: execute app whose filename is longer than NAME_MAX 
Change-Id: I0d8ed47c0391e65467cc8a2f4f499b0fbfa8c122
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-02-24 05:21:39 -08:00
YAMAMOTO Takashi
ee8cea1f4b esp32: xtensa_user: Implement a few more instructions 
You can find them used in the ROM version of memcpy.
While it might be controversial if it's a good idea to use the ROM version
of these functions, it's nicer to support more instructions here anyway.
 2021-02-24 10:34:55 +00:00
YAMAMOTO Takashi
ce6f6d4241 esp32 Kconfig: Move ESP32_SPIFLASH_xxx configs to the common place 
These are referenced by other boards than esp32-devkitc as well.
 2021-02-24 08:19:25 +00:00
Abdelatif Guettouche
fb68a4b777 esp32c3: Add system reset. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-23 18:13:02 -08:00
Gustavo Henrique Nihei
48ff647fe9 risc-v/esp32c3: Fix erroneous references to ESP32-C3 2021-02-23 18:12:16 -08:00
David Sidrane
62321fa5db s32k1xx:Support ramfunc 2021-02-23 18:11:41 -08:00
Gustavo Henrique Nihei
07900cdce9 Fix typo in "repetitions" word 2021-02-23 07:18:33 -08:00
Xiang Xiao
e7c97ce7f0 fs: Merge fs_poll into poll_fdsetup 
to avoid the user misuse the wrong funciton

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-02-23 08:39:48 -03:00
Dong Heng
7c9c9907ef boards/esp32c3: Add tmpfs mounting when bringing up 2021-02-23 00:41:08 -08:00
Nathan Hartman
c90fffcc09 arch/stm32f7: Fix nxstyle errors 
arch/arm/src/stm32f7/stm32_pwr.c,
arch/arm/src/stm32f7/stm32_pwr.h,
arch/arm/src/stm32f7/stm32_usbhost.h:

    * Fix nxstyle errors.
 2021-02-22 18:18:58 -08:00
Pedro Bertoleti
a4f422a801 This commit enables BMP180 suport for ESP32. 
As ESP32 has 2 I2C interfaces and BMP180 is a I2C sensor, the criterias to use BMP180 in I2C0 or I2C1 are:

1- First, bring-up routines search for BMP180 in I2C0.
   If BMP180 is found in I2C0, then /dev/press0 is created.
2- If BMP180 cannot be registered in I2C0, bring-up routines search for it in I2C1.
   If BMP180 is found in I2C1, then /dev/press0 is created.

It means only one BMP180 could be suported in Nuttx. In my tests I've observed
that BMP180 example application doesn't seem to work with /dev/press1 BMP180 device,
therefore even BMP180 is found in I2C1, it'll be registered as /dev/press0 device.
 2021-02-22 21:45:16 -03:00
Gustavo Henrique Nihei
3850df7a78 tools/esp32: Fix warnings from ShellCheck 2021-02-22 17:39:33 +00:00
Gustavo Henrique Nihei
af8e71d9e9 risc-v/esp32c3: Fix inconsistent guard comment 2021-02-22 09:24:14 -08:00
Gustavo Henrique Nihei
628e2288aa risc-v/esp32c3: Add missing header guard for lowputc 2021-02-22 09:24:14 -08:00
Gustavo Henrique Nihei
ca30c1db69 risc-v/esp32c3: Build serial driver only when selected 2021-02-22 09:24:14 -08:00
Abdelatif Guettouche
491a4c1ed2 risc-v/esp32c3: Don't reserve any vectors for any special use. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-02-22 09:21:24 -08:00
Gustavo Henrique Nihei
291a5755cc risc-v/esp32c3: Add support for MWDT0 and MWDT1 2021-02-22 17:18:01 +00:00
Yuichi Nakamura
7b8c72ec1b boards: raspberrypi-pico: Add nshsram defconfig for SRAM build 2021-02-22 09:11:09 -08:00
Masayuki Ishikawa
1f61c58e43 boards: raspberrypi-pico: Normalize nsh/defconfig 
Summary:
- This commit normalizes nsh/defconfig

Impact:
- None

Testing:
- None
 2021-02-22 12:14:47 +00:00
Brennan Ashton
f23f2a8557 Fix context switch bug for pic32mx 2021-02-21 22:24:12 -08:00