sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
12,742 Commits 1 Branch 0 Tags 291 MiB
f9053182d3
Commit Graph

870 Commits

Author SHA1 Message Date
Gregory Nutt
7fb7bef2d2 Fix an error introduced with last IOB fix 2016-01-26 09:55:17 -06:00
Gregory Nutt
365e015010 iob_alloc_qentry() has the same issue that was recently fixed in iob_alloc() 2016-01-25 17:46:59 -06:00
Gregory Nutt
91b762aa86 Networking: Fix an error that I introduced with my last review changes 2016-01-22 17:35:06 -06:00
Andrew Webster
5c589e5b9c Net: use nlldbg since an iob can be added from an interrupt 2016-01-22 16:23:31 -06:00
Andrew Webster
49e5cc5a6f TCP: check for an active connection before cleaning it up 
If there is no active connection (e.g. it is waiting in accept), then
the connection object, which doesn't yet exist, should not be cleaned
up when the socket is closed.
 2016-01-22 16:22:09 -06:00
Andrew Webster
5e3023bef1 TCP: return from write when there is no buffer space 
During a write, if there is no more buffer space for the user data,
return the amount that was written instead of waiting until there
is free space.  If nothing has been written yet, then block as before.

This solves a deadlock that occurs if the user data is too large to
fit in the available buffer:  the write thread will block before any
data is added to the write queue, leaving no possibility that more
buffers will free up when they are ACKed (since they have not yet been
sent).  The write thread will then block forever and hold all of the
buffers.
 2016-01-22 16:19:20 -06:00
Andrew Webster
e221777a7a TCP: post buffer semaphore before re-acquiring both 
TCP uses two semaphores for buffers, one for the entire buffer pool,
and one for the number of allowed buffers for readahead.  To avoid
double taking a semaphore under heavy load, release the semaphore
after waiting before trying to acquire both again.
 2016-01-22 16:15:10 -06:00
Andrew Webster
4875c6bbe3 TCP: check for connection before deleting it 
It is possible for a socket to have no connection, for example if a TCP
socket is waiting in accept.  This checks for this condition in case the
socket is closed from a different thread.
 2016-01-22 15:59:15 -06:00
Andrew Webster
f1ef2c6cde TCP: attempt to flush the write buffers before closing 
When a socket is closed, it should make sure that any pending write
data is sent before the FIN is sent.  It already would wait for all
sent data to be acked, however it would discard any pending write
data that had not been sent at least once.

This change adds a check for pending write data in addition to unacked
data.  However, to be able to actually send any new data, the send
callback must be left.  The callback should be freed later when the socket
is actually destroyed.
 2016-01-22 15:58:02 -06:00
Andrew Webster
cdd187a7f3 TCP: check for sndcb before using it 2016-01-22 15:54:45 -06:00
Andrew Webster
df211ee46a TCP: add writable check during poll 
When a poll requesting POLLOUT happens, the poll should return
immediately if a write will not block.  This change adds that, as
opposed to the old behaviour of blocking until a timer from the
Ethernet driver eventually triggers the poll to complete.

This is only implemented for buffered TCP.  Unbuffered TCP should
behave as before.
 2016-01-22 15:52:14 -06:00
Andrew Webster
99f5fcda70 iTCP: use lowlevel syslog to avoid infinte recursion 
If stdout is a socket (e.g. telnet), then the debug message will cause
more TCP data to be sent, which generates another message, and so on
 2016-01-22 15:41:48 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
8e9f884eb7 Step 1 in /etc/resolv.conf support 2016-01-13 15:06:44 -06:00
Gregory Nutt
f87358faf9 correct some conditional compilation; update some comments 2016-01-12 07:05:50 -06:00
Gregory Nutt
1608b7c33f Some networking logic was used helpers from apps/netutils. Not good. Quick fix is to duplicate logic 2016-01-09 15:56:08 -06:00
Gregory Nutt
795ddd7e80 OS modules: Add basic procfs support. A module registry that will eventually be used to support lsmod 2015-12-12 17:42:25 -06:00
Gregory Nutt
59b912477e Fix some warnings: Mismatched prototypes 2015-12-05 10:36:00 -06:00
Gregory Nutt
c16648b3fd Most cosmetic but also includes a fix for a compile problem from Ken Pettit 2015-12-01 12:54:57 -06:00
Gregory Nutt
6af3ba78b9 Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general. 2015-12-01 07:48:56 -06:00
Gregory Nutt
eb8668b0f7 net/: Add procfs support for network device status 2015-11-27 16:39:14 -06:00
Gregory Nutt
9d8462aa23 net/: Move net_procfs.c to net/procfs/. Partition logic a little better to make space to support net device procfs as well 2015-11-27 13:53:33 -06:00
Gregory Nutt
e4236941c6 net/net_procfs.c: Add basic support for networking procfs entries 2015-11-27 12:33:58 -06:00
Gregory Nutt
2a93c66948 include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:08:09 -06:00
Gregory Nutt
6209c51206 net/: More clean-up of spacing/alignment issues 2015-10-08 15:10:04 -06:00
Gregory Nutt
af086c40ff Remove dangling whitespace 2015-10-04 15:28:54 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
fec3d2cf62 recvfrom: Fixes for compilation with only raw, packet sockets 2015-09-14 09:06:08 -06:00
Gregory Nutt
a7e43c7fdb Eliminate some warnings 2015-09-08 09:20:18 -06:00
Gregory Nutt
d700793077 Fix a compile error when IPv6 is enabled 2015-09-07 16:34:25 -06:00
Alan Carvalho de Assis
f10a103108 Fix tcp_send_unbuffered when NET_ETHERNET is not defined. 2015-09-07 13:31:35 -06:00
Gregory Nutt
9c66bde5b0 Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1 2015-09-05 09:10:48 -06:00
Gregory Nutt
14297afb83 Cosmetic fix to break up long line 2015-09-03 07:33:50 -06:00
Gregory Nutt
36f4d0e9fc Fix a error in some comments 2015-09-02 20:03:28 -06:00
Gregory Nutt
0e2986f131 net/tcp: The logic that binds a specific networkd device to a connection was faulty for the case of multiple network devices. On bind(), the local address should be used to associate a device with the connection (if the local address is not INADDR_ANY); On connect(), the remote address should be used (in case the local address is INADDR_ANY). On accept(), it does not matter but the remote address is the one guarenteed to be available. 2015-09-02 19:48:31 -06:00
Gregory Nutt
9fcad39a45 Trivial typo fix 2015-09-02 10:09:33 -06:00
Paul A. Patience
3b89eabd50 Correct #if to #ifdef when the macro can be undefined. Fix bug in AT24XX driver: it should compare AT24XX_ADDRSIZE to 2. 2015-09-01 13:52:29 -04:00
Gregory Nutt
63071a563a Costmetic changes 2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847 net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down. 2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on 2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f Fix a badly formatted comment 2015-08-26 19:18:04 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Saehie ParK
e6dbd3d903 Networking: Fix network device name assignment logic for the case of the local loopback device. There is only one local loopback network device and it is unnumbered 2015-08-25 20:03:25 -06:00
Anton D. Kachalov
b125c36849 Field `d_sndlen' is unsigned. It is always >= 0. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-26 00:16:52 +03:00
SaeHie Park
e983e547e1 Networking: Correct return value from psock_tcp_accept(). From SaeHie Park 2015-08-25 07:15:21 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00