Gregory Nutt
|
8bbf4f3ec8
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
951f4ff4a3
|
LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha
|
2014-02-19 17:02:30 -06:00 |
|
Gregory Nutt
|
ff899bf0e3
|
SAMD20: Add a framework for an SPI driver
|
2014-02-19 16:52:12 -06:00 |
|
Gregory Nutt
|
916308efc1
|
SAMD20: Move some common SERCOM logic to a separate file where it can be shared
|
2014-02-19 14:47:04 -06:00 |
|
Gregory Nutt
|
c55ac71603
|
Nodes in the pseudo-filesystem can now be renamed or moved within the pseduo-filesystem
|
2014-02-19 13:14:39 -06:00 |
|
Gregory Nutt
|
077b211456
|
Bug fix for the MIO283QT-9A driver from Toby Duckwork
|
2014-02-19 10:57:32 -06:00 |
|
Gregory Nutt
|
834ee93cae
|
mkdir can now be used to create empty directories in the pseudo-filesystem.
|
2014-02-19 10:30:50 -06:00 |
|
Gregory Nutt
|
5bae65fa6c
|
rmdir now may be used to remove empty nodes from the pseudo-filesystem
|
2014-02-19 10:01:26 -06:00 |
|
Gregory Nutt
|
66a0cfe88f
|
FS: directory operations will now work on empty directory nodes in the pseudo-filesystem
|
2014-02-19 09:21:38 -06:00 |
|
Gregory Nutt
|
f68d96a0a5
|
All mbed configurations have been converted to used the kconfig-frontends tools (unverifeid)
|
2014-02-18 16:50:09 -06:00 |
|
Gregory Nutt
|
b165efca23
|
stm3240g-eval/webserver configuration converted to use the kconfig-frontends tools by Alan Carvalho de Assis
|
2014-02-18 14:36:32 -06:00 |
|
Gregory Nutt
|
6092b5813a
|
Numerous updates to the CC3000 driver from David Sidrane
|
2014-02-18 14:16:51 -06:00 |
|
Gregory Nutt
|
705fc64e95
|
STM32F429 Discovery: All src/ files renamed to make consistent with current naming conventions
|
2014-02-18 12:24:21 -06:00 |
|
Gregory Nutt
|
06e7e5dfa1
|
More STM32F429 Discovery FPU-related changes from David Alessio
|
2014-02-18 12:07:17 -06:00 |
|
Gregory Nutt
|
3be307bc25
|
sched/task_terminate always return an error because return value was not being set correctory. From Gosha
|
2014-02-18 11:50:32 -06:00 |
|
Gregory Nutt
|
b3f4814e9f
|
SAMD20: The basic port is complete but still untested
|
2014-02-16 11:34:32 -06:00 |
|
Gregory Nutt
|
d0782933b7
|
Back out part of write buffering change. David G reports that this causes problems connecting to a server
|
2014-02-15 08:07:43 -06:00 |
|
Gregory Nutt
|
8acdc31a6e
|
STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL
|
2014-02-14 09:09:56 -06:00 |
|
Gregory Nutt
|
bd15ec2565
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
ca9a8e5875
|
Add basic framework to support the Atmel SAMD Cortex-M+ chip
|
2014-02-12 15:07:11 -06:00 |
|
Gregory Nutt
|
b656602055
|
More changes to reduce complaints from CppCheck. Some latent bugs fixes, but probably some new typos introduced
|
2014-02-10 19:11:56 -06:00 |
|
Gregory Nutt
|
91b002a043
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
a9b01d5824
|
Support for the MIO283QT9A LCD from Toby Duckworth
|
2014-02-10 12:26:08 -06:00 |
|
Gregory Nutt
|
0070815e87
|
HID mouse can now support some while mice. Problems with Microsoft mice
|
2014-02-10 11:53:37 -06:00 |
|
Gregory Nutt
|
752767cfc1
|
Add a mouse interface that is similar to the touchscreen interface except that it can handle multple buttons and continuously reports positional data so that it can control a cursor
|
2014-02-10 10:14:22 -06:00 |
|
Gregory Nutt
|
0979cdba0e
|
The USB HID mouse driver is now functional. There are some usage issues as described in the top-level TODO list
|
2014-02-09 17:40:23 -06:00 |
|
Gregory Nutt
|
03d5a77615
|
LP1766-STK: Add a configuration to test the USB HID mouse
|
2014-02-09 16:00:57 -06:00 |
|
Gregory Nutt
|
0e486c953b
|
Add support for a USB HID mouse. Untested on initial check-in
|
2014-02-09 13:49:31 -06:00 |
|
Gregory Nutt
|
9d8ecdbefd
|
Fix a compile error that crept into the LPC17xx USB host driver
|
2014-02-09 13:45:18 -06:00 |
|
Gregory Nutt
|
e10ab85d1d
|
More changes to restore the native Windows build
|
2014-02-07 10:14:11 -06:00 |
|
Gregory Nutt
|
420cb1f304
|
Add a coding standards document
|
2014-02-06 13:48:07 -06:00 |
|
Gregory Nutt
|
cde8e80302
|
A10 had the same cut'n'paste error as did the LM4F
|
2014-02-03 17:22:47 -06:00 |
|
Gregory Nutt
|
76c982583d
|
STM32F4 Discovery: Rename most everything in the board source directory to conform with the ever evolving naming standard
|
2014-02-03 17:19:30 -06:00 |
|
Gregory Nutt
|
ef899c5115
|
Fix cut'n'paster errors in conditional compilation. Prevented LM4F120 Launchpad UARTs 2-7 from being used
|
2014-02-03 17:00:05 -06:00 |
|
Gregory Nutt
|
075ba4ff89
|
Preparation for NuttX-6.33 release (maybe tomorrow)
|
2014-01-29 14:41:18 -06:00 |
|
Gregory Nutt
|
764ba4da70
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
6188eb7472
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
3b172e5f41
|
Remove support for EFM32. Not ready to be fielded
|
2014-01-27 08:03:39 -06:00 |
|
Gregory Nutt
|
2c8a2bfffc
|
x86: fix 'Error: .size expression for idle_stack does not evaluate to a constant' bug from Matt Campbell
|
2014-01-25 13:53:23 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
1d5b2d3d3e
|
Rename up_irqbutton() to board_button_irq()
|
2014-01-24 14:04:07 -06:00 |
|
Gregory Nutt
|
1ac245b9c6
|
Rename up_buttons() to board_buttons()
|
2014-01-24 13:59:24 -06:00 |
|
Gregory Nutt
|
b0c0df84f6
|
Rename up_buttoninit to board_button_intialize
|
2014-01-24 13:50:23 -06:00 |
|
Gregory Nutt
|
e4142f65fb
|
Assembler changes with the gcc-47 distribution from ARM mean that we need to be explicit about branch one or more of the wide branch opcodes results in bad table branching. From Mike Smith
|
2014-01-23 15:29:57 -06:00 |
|
Gregory Nutt
|
90f0e4f6dc
|
configs/efm32-dk3650: Support for Energy Micro's development kit for the Leopard Gecko MCU. From Richard Cochran
|
2014-01-23 08:19:34 -06:00 |
|
Gregory Nutt
|
7ce90ef7e2
|
arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran
|
2014-01-23 07:41:00 -06:00 |
|
Gregory Nutt
|
85dea13030
|
Config.mk: If WINTOOL is set, COMPILE definition should convert path generated by Cygwin make to a proper Windows path. From Richard Cochran (2014-1-23).
|
2014-01-23 07:37:14 -06:00 |
|
Gregory Nutt
|
564fe7e232
|
configs/16z: Add support for 16z board
|
2014-01-22 11:50:37 -06:00 |
|
Gregory Nutt
|
9e2640b896
|
Networking: Improved status reporting and new carrier management interfaces. From Max Holtzberg
|
2014-01-21 10:21:45 -06:00 |
|
Gregory Nutt
|
1bd343b690
|
configs/olimex-stm32-p107: Failes to build is SPI3 for UEXT is not remapped
|
2014-01-21 10:01:51 -06:00 |
|
Gregory Nutt
|
297896fe0e
|
getopt(): Could leave optind in undefined state if argc == 1
|
2014-01-20 13:13:36 -06:00 |
|
Gregory Nutt
|
006a430029
|
ctypes.h: Fix typo in macro name iscontrol->iscntrl
|
2014-01-18 13:22:20 -06:00 |
|
Gregory Nutt
|
d96bfc2d9b
|
X86: Add a configuration option to select the -m32 compiler option when needed
|
2014-01-18 07:38:50 -06:00 |
|
Gregory Nutt
|
2382af1e7b
|
You can again specify the default board sub-directory when CONFIG_ARCH_BOARD_CUSTOM is used
|
2014-01-16 10:42:54 -06:00 |
|
Gregory Nutt
|
ebc3a64e35
|
Back out last change to configs/Kconfig. It has some bad side-effects
|
2014-01-16 10:13:20 -06:00 |
|
Gregory Nutt
|
0309c63a23
|
You can now specify or override the default board sub-directory. This is only useful when CONFIG_ARCH_BOARD_CUSTOM is used and the default board sub-directory is not available
|
2014-01-16 09:43:09 -06:00 |
|
Gregory Nutt
|
be14ee1f95
|
Move strol(), stroul(), and friends from libc/string to libc/stdlib where they belong
|
2014-01-16 08:03:26 -06:00 |
|
Gregory Nutt
|
32b4a48e7a
|
Misc changes from Richard Cochran
|
2014-01-15 11:05:15 -06:00 |
|
Gregory Nutt
|
be474523c4
|
Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip.
|
2014-01-15 09:56:30 -06:00 |
|
Gregory Nutt
|
836057e340
|
Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation
|
2014-01-15 08:09:19 -06:00 |
|
Gregory Nutt
|
c9cb7972fb
|
FAT: Fix some root directory logic that was conditionally done only for FAT32. Apparently this needs to be done for all FAT types. From Tridge via Lorenz Meier
|
2014-01-14 18:24:21 -06:00 |
|
Gregory Nutt
|
2bfad60c85
|
If write buffering is enabled, then it is necessary to release the write buffer resources (callback structure) when the socket is closed
|
2014-01-14 18:19:43 -06:00 |
|
Gregory Nutt
|
806af1f4e2
|
When dup'ing sockets, need to clone fields for TCP write buffering too
|
2014-01-14 15:17:53 -06:00 |
|
Gregory Nutt
|
85e7e13bb0
|
Fix a FAT cluster allocation bug. From Tridge
|
2014-01-14 13:45:26 -06:00 |
|
Gregory Nutt
|
803cdfdaf1
|
Changes to get PX4 config to build. Also some warning removal
|
2014-01-14 13:30:22 -06:00 |
|
Gregory Nutt
|
a9e44cdfe0
|
The first set of changes to incorporate Jason Jiangs TCP write buffering logic
|
2014-01-13 17:11:01 -06:00 |
|
Gregory Nutt
|
0142b3cf5f
|
NET: prevent tcp_connect callback from being double freed. From Max Holtzberg.
|
2014-01-13 12:04:01 -06:00 |
|
Gregory Nutt
|
cbb5e4889b
|
Add support for the SO_LINGER socket option. Based on logic from Jason Jiang. Utestested on initial commit
|
2014-01-13 11:58:45 -06:00 |
|
Gregory Nutt
|
fd54cfb213
|
Add support for the STM32VL-Discovery board. Contributed by Alan Carvalho de Assis
|
2014-01-12 17:59:38 -06:00 |
|
Gregory Nutt
|
95b63762fb
|
Fix a memory leak in dynamic loader
|
2014-01-11 14:11:41 -06:00 |
|
Gregory Nutt
|
b301471adb
|
A10: Serial clock is OSC24M. From Alan Carvalho de Assis
|
2014-01-10 15:32:42 -06:00 |
|
Gregory Nutt
|
4e2c140124
|
Add stpcpy()
|
2014-01-09 14:08:48 -06:00 |
|
Gregory Nutt
|
37f0db6e0c
|
Add support for the XPT2046 touchscreen controller on the Viewtool LCD module
|
2014-01-09 10:57:17 -06:00 |
|
Gregory Nutt
|
8edac663d8
|
Still recovering from recent NX reorganization. Reported by Steve Redler IV
|
2014-01-08 17:28:54 -06:00 |
|
Gregory Nutt
|
c31f2b6f78
|
Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV
|
2014-01-08 16:44:11 -06:00 |
|
Gregory Nutt
|
0bdee120a1
|
Add lib_libfgets() to better support the small differences between gets(), gets_s(), and fgets()
|
2014-01-08 10:47:34 -06:00 |
|
Gregory Nutt
|
2060d75ba2
|
Add a quick'n'dirty implementation of C11 threads.h
|
2014-01-07 18:09:35 -06:00 |
|
Gregory Nutt
|
e3b12cbaa9
|
Add x qualifier to fopen to support exlusive open
|
2014-01-07 17:18:38 -06:00 |
|
Gregory Nutt
|
c5f9b8768e
|
Add type rsize_t and function gets_s()
|
2014-01-07 16:27:45 -06:00 |
|
Gregory Nutt
|
764e117965
|
A10: Correct handling of the serial busy interrupt
|
2013-12-08 08:51:19 -06:00 |
|
Gregory Nutt
|
126bec4e55
|
Add more nops after enabling MMU for Cortex-A8
|
2014-01-07 08:38:00 -06:00 |
|
Gregory Nutt
|
9d393e167c
|
A10: Handle UART BUSY interrupt; Back out change to mkconfig.c -- it causes problems for assembly
|
2013-12-07 11:46:08 -06:00 |
|
Gregory Nutt
|
72f00b9bb6
|
mkconfig: Cast RAM size to unsigned to avoid complains about integer overflow in calculatino of CONFIG_RAM_END
|
2014-01-06 12:09:13 -06:00 |
|
Gregory Nutt
|
8bc6125b3c
|
Add ARMv7-A syscall.h header file
|
2014-01-05 15:49:06 -06:00 |
|
Gregory Nutt
|
458465c8ed
|
Viewtools STM32F103: Add SSD1289 LCD support
|
2014-01-05 14:14:59 -06:00 |
|
Gregory Nutt
|
b46aa97ac4
|
Makefile.win: Native windows build fixes from Max Holtzberg
|
2014-01-04 09:14:42 -06:00 |
|
Gregory Nutt
|
f9189ae64e
|
Olimex STM32 P107: Add native Windows build support. From Max Holtzberg
|
2014-01-04 09:11:20 -06:00 |
|
Gregory Nutt
|
b9a38cea22
|
nuttx/tools: Fixes for some Windows native build issues from Max Holtzberg
|
2014-01-04 09:08:14 -06:00 |
|
Gregory Nutt
|
c01e95584c
|
STM32: Single wire UART support from Thomas Grubler
|
2014-01-02 07:56:46 -06:00 |
|
Gregory Nutt
|
5a8517b849
|
Add Z16F NSH configuration
|
2014-01-01 12:40:18 -06:00 |
|
Gregory Nutt
|
892784538d
|
sim/mount: Converted to use kconfig-frontends tools
|
2014-01-01 08:52:58 -06:00 |
|
Gregory Nutt
|
43e47f8e78
|
NX server needs to be on a kernel thread for the kernel build
|
2013-12-30 17:55:19 -06:00 |
|
Gregory Nutt
|
f51f85db37
|
NX: Use a consistent allocator in all configurations
|
2013-12-30 12:42:18 -06:00 |
|
Gregory Nutt
|
b2a68d8b17
|
Move nuttx/configs/stm3240g-eval/src/up_cxxinitialize.c to apps/platform/stm3240g-eval/
|
2013-12-29 15:02:51 -06:00 |
|
Gregory Nutt
|
804e80d0cb
|
STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration
|
2013-12-29 13:15:08 -06:00 |
|
Gregory Nutt
|
5c7a4896cc
|
Add nx_start() to simplify starting the NX server from within the RTOS
|
2013-12-29 11:11:48 -06:00 |
|
Gregory Nutt
|
c144669782
|
Move more files from graphics/nxmu to libnx/nxmu
|
2013-12-29 08:48:06 -06:00 |
|
Gregory Nutt
|
715177d861
|
Add sem_timedwait to syscalls
|
2013-12-28 12:04:39 -06:00 |
|
Gregory Nutt
|
af40e36466
|
Move graphics/nxtk to libnx/nxtk
|
2013-12-28 11:33:21 -06:00 |
|
Gregory Nutt
|
e88922bce1
|
Move graphics/nxfonts to libnx/nxfonts
|
2013-12-28 09:33:12 -06:00 |
|
Gregory Nutt
|
a457105a0b
|
Move the NX components out of libc and into its own library, libnx
|
2013-12-28 08:40:03 -06:00 |
|
Gregory Nutt
|
090a18f863
|
Decoupling NX user interfaces to support NX kernel build (phase 5)
|
2013-12-27 16:30:18 -06:00 |
|
Gregory Nutt
|
64bb8b3341
|
Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb
|
2013-12-27 11:15:18 -06:00 |
|
Gregory Nutt
|
4922f71703
|
Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~
|
2013-12-26 09:22:37 -06:00 |
|
Gregory Nutt
|
e963a4d862
|
F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS
|
2013-12-25 18:34:15 -06:00 |
|
Gregory Nutt
|
091e5fdf66
|
Viewtools netnsh configuration supports Telnet console; A framework for SD card and USB device support
|
2013-12-25 14:51:56 -06:00 |
|
Gregory Nutt
|
53bc0bce00
|
Viewtool STM32F107: Add a NSH configuration with network support
|
2013-12-25 12:14:24 -06:00 |
|
Gregory Nutt
|
0d6a046e67
|
Add support for Sharp Memory LCD on the Maple board
|
2013-12-23 16:47:31 -06:00 |
|
Gregory Nutt
|
560ae31a99
|
Improved debug output in the high pri, nested interrupt test
|
2013-12-23 14:16:30 -06:00 |
|
Gregory Nutt
|
5c28d5a15b
|
Disable CONFIG_ARCH_INT_DISABLEALL: It does not work in its current form
|
2013-12-23 14:15:11 -06:00 |
|
Gregory Nutt
|
76b04f137f
|
Need to protect state on stack to do nested interrupt handling
|
2013-12-23 14:11:32 -06:00 |
|
Gregory Nutt
|
d41bfe4d5b
|
Fixes a few more high priority, nested interrupt logic
|
2013-12-23 11:13:56 -06:00 |
|
Gregory Nutt
|
facf988cb2
|
Add logic to configure interrupt controller debug; Fix high priority, nested interrupt build problems
|
2013-12-22 11:16:29 -06:00 |
|
Gregory Nutt
|
540ab63aa6
|
Initial framework for a test of high-pri, nested interrupts. Incomplete and does not work
|
2013-12-22 10:12:26 -06:00 |
|
Gregory Nutt
|
b718fd007c
|
viewtool configuration will not support boad with STM32F103VC mounted; converted one stm3210e-eval configuration to use kconfig-frontends
|
2013-12-22 08:51:36 -06:00 |
|
Gregory Nutt
|
5f89b91ad1
|
Finishes coding of ARMv7-M high priority nested interrupt logic. Still undocumented; still not fully tested
|
2013-12-21 15:05:48 -06:00 |
|
Gregory Nutt
|
7bcfcb2544
|
Beginning of high priority nested interrupt support for the ARMv7-M family
|
2013-12-21 11:03:38 -06:00 |
|
Gregory Nutt
|
461a8b4433
|
Remove all configuration variable documentation from configs/README.txt and Docuemntation/NuttXPortingGuidle.html. The current NuttX configuration is documented in Kconfig files and in Documentation/NuttXSonfigVariables.html. The older configuration variable documentation is not being maintained and, hence, is a liability
|
2013-12-20 18:25:36 -06:00 |
|
Gregory Nutt
|
1e7365eea4
|
Cosmetic: Changlog and update to comments
|
2013-12-20 16:24:22 -06:00 |
|
Gregory Nutt
|
e23dcc6384
|
Cortex-A: Fix start-up cache invalidation logi
|
2013-12-18 09:01:43 -06:00 |
|
Gregory Nutt
|
ad5e086625
|
Use kconfig-qconf or kconfig-gconfig if they are available
|
2013-11-16 12:59:59 -06:00 |
|
Gregory Nutt
|
96918171ee
|
Review Cortex-A9 CP15 registers and update register definitions
|
2013-12-16 10:23:29 -06:00 |
|
Gregory Nutt
|
7fdf57b7bb
|
procfs now shows stack thread information
|
2013-12-15 14:35:47 -06:00 |
|
Gregory Nutt
|
1f115c76eb
|
procfs now shows information about the group that each thread belongs: Like parents, group member, open file, and open sockets
|
2013-12-15 11:22:48 -06:00 |
|
Gregory Nutt
|
66f330331b
|
NxConsole: Fix typo that caused compile error when CONFIG_NXCONSOLE_BPP is less than 8. From Librae
|
2013-12-15 07:25:49 -06:00 |
|
Gregory Nutt
|
46b77e2544
|
Support /proc/uptime
|
2013-12-14 10:34:08 -06:00 |
|
Gregory Nutt
|
9f01df47ea
|
Create procfs_utils.c; File missed from last commit; + remove warning from mm_memalign.c (how did this work before?)
|
2013-12-14 08:53:23 -06:00 |
|
Gregory Nutt
|
623229057f
|
A10 serial driver (still needs some work). From Alan Carvalho de Assis
|
2013-12-13 16:41:44 -06:00 |
|
Gregory Nutt
|
756fd631ca
|
A10: Add A10 configuration header file
|
2013-12-13 12:53:33 -06:00 |
|
Gregory Nutt
|
d6b81cc7ef
|
A10: Timer interrupt handler
|
2013-12-13 12:42:26 -06:00 |
|
Gregory Nutt
|
7aff059fd0
|
Move sleep() and usleep() from sched/ to libc/unistd/. These functions now are simple wrappers for nanosleep(). Remove sleep() and usleep() from system calls; add nanosleep() to system calls
|
2013-12-13 07:57:13 -06:00 |
|
Gregory Nutt
|
342e777029
|
Add nanosleep()
|
2013-12-12 20:12:33 -06:00 |
|
Gregory Nutt
|
2fac3de49e
|
strftime(): Need null-termination on generated string. From Max Holtzberg
|
2013-12-12 17:41:07 -06:00 |
|
Gregory Nutt
|
c0367fcc0a
|
Beginning of Timer register definition file for the A10
|
2013-12-12 12:27:30 -06:00 |
|
Gregory Nutt
|
0a91686566
|
configs/Kconfig: Typo fix from Ken Pettit
|
2013-12-12 09:25:31 -06:00 |
|
Gregory Nutt
|
e4471dc8e0
|
procfs/: Extenstive architectural changes and enhancements by Ken Pettit
|
2013-12-12 09:21:55 -06:00 |
|
Gregory Nutt
|
33a3bb0e37
|
Pattern matching logic extended by Ken Pettit
|
2013-12-12 08:40:54 -06:00 |
|
Gregory Nutt
|
482d94cfd2
|
A10+pcDuino: PIO support, LED and button support
|
2013-12-11 13:23:40 -06:00 |
|
Gregory Nutt
|
06f08899dc
|
A10 PIO register definition header file
|
2013-12-10 15:53:32 -06:00 |
|
Gregory Nutt
|
62bf4d158d
|
Move ramdisk.h to include/nutt/fs/ramdisk.h
|
2013-12-10 09:42:58 -06:00 |
|
Gregory Nutt
|
f821e74ebb
|
Move smart.h to include/nuttx/fs/smart.h
|
2013-12-10 09:38:48 -06:00 |
|
Gregory Nutt
|
beda9787b4
|
Move rgbcolors.h to include/nuttx/video
|
2013-12-10 09:29:20 -06:00 |
|
Gregory Nutt
|
e282aad903
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
Gregory Nutt
|
0297ed0966
|
A10 UART: Register definition header file
|
2013-12-09 14:18:32 -06:00 |
|
Gregory Nutt
|
4d07c15932
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
4a3629180e
|
A10 interrupt logic
|
2013-12-08 10:18:28 -06:00 |
|
Gregory Nutt
|
c661c4014f
|
A10 mmu configuration and INTC register definitions
|
2013-12-08 09:11:52 -06:00 |
|
Gregory Nutt
|
22fefb59da
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
05759e0721
|
Add basic directory structure to support the Allwinner A10
|
2013-12-07 13:06:34 -06:00 |
|
Gregory Nutt
|
604361ac6b
|
Prep for the NuttX-6.32 Release
|
2013-12-07 11:04:08 -06:00 |
|
Gregory Nutt
|
ed9756c137
|
MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers
|
2013-12-05 18:19:48 -06:00 |
|
Gregory Nutt
|
40e0253189
|
mkfatfs: Fix an error in logic that determines if FAT16 is possible
|
2013-12-05 18:17:22 -06:00 |
|
Gregory Nutt
|
692b087d07
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
68ccbc0855
|
Add drivers/mtd/README.txt
|
2013-12-04 07:46:10 -06:00 |
|
Gregory Nutt
|
0d8ac38e59
|
SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README
|
2013-12-02 17:22:55 -06:00 |
|
Gregory Nutt
|
5b9d07e5c0
|
NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered
|
2013-12-01 20:17:09 -06:00 |
|
Gregory Nutt
|
5c1f0946c2
|
NXFFS: First of many changes for NAND. NAND reports read errors on ECC failures. NXFFS can't just give up in these cases and must treat read failures like bad blocks
|
2013-12-01 18:22:33 -06:00 |
|
Gregory Nutt
|
5978e04411
|
ViewTool STM32F107: Add support for on-board LEDs and buttons
|
2013-11-30 14:15:15 -06:00 |
|
Gregory Nutt
|
22fb787c86
|
Basic board support for the ViewTool STM32F103/F107 board
|
2013-11-30 12:14:15 -06:00 |
|
Gregory Nutt
|
2aa0809e8b
|
Inode semaphore must be entrant or a deadlock can occur in certain scenarios
|
2013-11-28 13:12:14 -06:00 |
|
Gregory Nutt
|
f171394ba9
|
STM32F429I-Discovery: Add support for external SST25 FLASH. From Ken Pettit
|
2013-11-28 08:21:15 -06:00 |
|
Gregory Nutt
|
755ee7f34b
|
STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit
|
2013-11-28 08:13:59 -06:00 |
|
Gregory Nutt
|
a791b1070b
|
Fix error in SMARTFS partition number reporting
|
2013-11-28 08:11:13 -06:00 |
|
Gregory Nutt
|
5a18f048ce
|
Add MTD SST25 driver for larger SST25 parts. From Ken Pettit
|
2013-11-28 08:04:46 -06:00 |
|
Gregory Nutt
|
1fed0407b3
|
MTD: Pack the geometry structure so that is can handle larger erase blocks
|
2013-11-27 11:04:11 -06:00 |
|
Gregory Nutt
|
45a4eba015
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
b6da35e12c
|
Add a script to produce ctags. From Ken Pettit
|
2013-11-23 06:49:40 -06:00 |
|
Gregory Nutt
|
641a3387ab
|
Add README file for SMARTFS. From Ken Pettit
|
2013-11-23 06:44:17 -06:00 |
|
Gregory Nutt
|
38042f641a
|
LPC-H3131: SDRAM support (untested)
|
2013-11-21 06:37:50 -06:00 |
|
Gregory Nutt
|
8f0c334d04
|
ARM9: More cache control functions
|
2013-11-20 15:24:14 -06:00 |
|
Gregory Nutt
|
9e804749e9
|
Olimex LPC-H3131: Drop loops-per-second by a factor of 4. Why is the H3131 only 25% as fast as the EA3131 at the same clocking?
|
2013-11-19 15:54:23 -06:00 |
|
Gregory Nutt
|
c9c6d0c0d1
|
Olimex LPC_H3131: Add GPIO support for LEDs and for USB host power enable and overcurrent detection.
|
2013-11-19 15:52:10 -06:00 |
|
Gregory Nutt
|
da5670d10b
|
LPC3131 EHCI: Add USB host tracing support
|
2013-11-19 15:48:02 -06:00 |
|
Gregory Nutt
|
448c8572cd
|
Rethinking some NAND interfaces
|
2013-11-19 08:50:12 -06:00 |
|
Gregory Nutt
|
3faa880ef1
|
MTD NAND: Beginning of software ECC logic
|
2013-11-18 09:43:44 -06:00 |
|
Gregory Nutt
|
22d4eb9cca
|
More NAND stuff
|
2013-11-17 14:35:57 -06:00 |
|
Gregory Nutt
|
d54832a942
|
More NAND stuff
|
2013-11-17 12:22:09 -06:00 |
|
Gregory Nutt
|
0e7a8668a5
|
Continuing NAND integration
|
2013-11-17 08:56:30 -06:00 |
|
Gregory Nutt
|
03b9f5a8e6
|
More NAND logic (still not complete)
|
2013-11-16 18:26:07 -06:00 |
|
Gregory Nutt
|
854e50b48e
|
Further NAND support
|
2013-11-16 12:22:43 -06:00 |
|
Gregory Nutt
|
7ccbbe07cb
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
c7657c9c5e
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
e53ba01b64
|
Add support for ONFI compatible NAND devices (NAND logic still incomplete)
|
2013-11-15 14:11:21 -06:00 |
|
Gregory Nutt
|
897572a552
|
Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h
|
2013-11-15 11:22:23 -06:00 |
|
Gregory Nutt
|
121de26583
|
SAMA5 NAND: Basic support for access to NAND FLASH
|
2013-11-15 09:30:05 -06:00 |
|
Gregory Nutt
|
517546bb47
|
tools/mkconfig.c: CONFIG_FS_SMARTFS must be included in the list of writable file systems
|
2013-11-15 07:33:39 -06:00 |
|
Gregory Nutt
|
fb2988042e
|
FS mount logic: Fix error in conditional compilation. Reported by Daniel Palmer
|
2013-11-15 07:21:52 -06:00 |
|
Gregory Nutt
|
8353d234aa
|
LPC31 EHCI: First cut at an EHCI driver for the LPC31
|
2013-11-14 16:12:22 -06:00 |
|
Gregory Nutt
|
b3faf95a7c
|
LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools
|
2013-11-14 15:33:43 -06:00 |
|
Gregory Nutt
|
b7ef5917be
|
SAMA5 PCK: Add support for programmable clock outputs
|
2013-11-14 11:16:04 -06:00 |
|
Gregory Nutt
|
bc58422444
|
STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file
|
2013-11-14 08:29:36 -06:00 |
|
Gregory Nutt
|
015072a4d4
|
fs/binfs/README.txt: Add a README file
|
2013-11-13 16:40:03 -06:00 |
|
Gregory Nutt
|
6e7c9b93c6
|
fs/procfs: Add a tiny, primitive procfs file system. Might get more interesting in the future
|
2013-11-13 15:59:14 -06:00 |
|
Gregory Nutt
|
5e4d01f626
|
SAMA5D3x-EK updated README
|
2013-11-12 17:00:37 -06:00 |
|
Gregory Nutt
|
2dec8fbf58
|
Various fixes from initial attempts to integrate the SAMA5 SSC/I2C driver with the I2C character driver loopback test
|
2013-11-11 15:18:57 -06:00 |
|
Gregory Nutt
|
0db55f5b4c
|
STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit
|
2013-11-11 14:05:29 -06:00 |
|
Gregory Nutt
|
390378bfcf
|
Remove unused apb_prepare function
|
2013-11-11 08:14:56 -06:00 |
|
Gregory Nutt
|
6e1523cc45
|
Support for the Atmel SAM4E family. From Mitko
|
2013-11-11 07:45:09 -06:00 |
|
Gregory Nutt
|
64a7e96f1f
|
I2S simplifed audio buffer queuing
|
2013-11-10 14:51:33 -06:00 |
|
Gregory Nutt
|
725ef58a19
|
SAMA5 SSC: Add support for loopback mode. Plus unrelated Make.defs file from the last checkin
|
2013-11-10 11:46:45 -06:00 |
|
Gregory Nutt
|
8b73558ad7
|
Moved audio/buffer.c to libc/audio/lib_buffer.c so that it can be shared betweent he OS and applications in a kernel build
|
2013-11-10 11:20:06 -06:00 |
|
Gregory Nutt
|
926e91555d
|
VS1053 worker thread stack size is now configurable; Worker thread is named via pthread_setname_np(). From Ken Pettit
|
2013-11-10 11:03:19 -06:00 |
|
Gregory Nutt
|
f7f5923d9d
|
Freedom KL25Z: Add PWM support. From Alan Carvalho de Assis
|
2013-11-10 10:39:03 -06:00 |
|
Gregory Nutt
|
c9d3cdb85e
|
Kinetis KL: PWM driver from Alan Carvalho de Assis
|
2013-11-10 10:34:45 -06:00 |
|
Gregory Nutt
|
f5c82c0df9
|
Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices
|
2013-11-10 10:24:09 -06:00 |
|
Gregory Nutt
|
4216e66fc7
|
STM32F429I-Discovery: Add support for the usbnsh and usbmsc configurations using the OTG HS peripheral in FS mode. From Ken Pettit.
|
2013-11-10 07:30:34 -06:00 |
|
Gregory Nutt
|
4db4c4d770
|
STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit
|
2013-11-10 07:23:06 -06:00 |
|
Gregory Nutt
|
ac120d60c3
|
SAMA5 I2S: Driver is code complete, untested and subject to some rethinking
|
2013-11-09 13:08:20 -06:00 |
|
Gregory Nutt
|
4171db9da2
|
Add an apps/examples/usbserial configuration for the Spark. From David Sidrane
|
2013-11-07 18:31:08 -06:00 |
|
Gregory Nutt
|
78a239f79e
|
Add CDC/ACM serial driver for the Spark composite configuration
|
2013-11-07 17:39:13 -06:00 |
|
Gregory Nutt
|
d8d469fa58
|
STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane
|
2013-11-07 17:25:05 -06:00 |
|
Gregory Nutt
|
55b592faf8
|
Add support for the STM32F429I-Discovery board from Ken Pettit
|
2013-11-07 16:55:45 -06:00 |
|
Gregory Nutt
|
9d653bdfee
|
Support for the STM32F429 from Ken Pettit
|
2013-11-07 16:47:43 -06:00 |
|
Gregory Nutt
|
4214dc9ce9
|
SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver
|
2013-11-07 12:26:53 -06:00 |
|
Gregory Nutt
|
143c8042b8
|
Initial I2S interface defintion
|
2013-11-07 09:39:46 -06:00 |
|
Gregory Nutt
|
e231270215
|
SAMA5 PWM: PWM driver is now functional
|
2013-11-07 09:17:46 -06:00 |
|
Gregory Nutt
|
3aa348035d
|
SAMA5D3x-EK: Add support board-specific PWM testing
|
2013-11-06 14:38:19 -06:00 |
|
Gregory Nutt
|
b5791ac7a6
|
SAMA5 PWM: Driver now in build and configuration system
|
2013-11-06 12:24:51 -06:00 |
|
Gregory Nutt
|
e73d77c73f
|
SAMA5 PWM: Add first cut at PWM driver
|
2013-11-06 10:55:12 -06:00 |
|
Gregory Nutt
|
f67ee984f3
|
Correct unitialization of composite USB device. A stale pointer was being reused. From David Sidrane
|
2013-11-05 09:12:08 -06:00 |
|
Gregory Nutt
|
4cb6c0ad80
|
STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane
|
2013-11-05 08:56:06 -06:00 |
|
Gregory Nutt
|
120075577f
|
configs/mikroe-stm32f4/fulldemo updated by Ken Pettit
|
2013-11-04 09:29:27 -06:00 |
|
Gregory Nutt
|
14b4fa3c72
|
configs/sim/configdata: MTD configuration data driver unit test. From Ken Pettit
|
2013-11-04 09:17:31 -06:00 |
|
Gregory Nutt
|
a4a18241d5
|
Updated configuration driver from Ken Pettit
|
2013-11-04 08:52:16 -06:00 |
|
Gregory Nutt
|
b9130ff601
|
SAMA5 CAN: Fix a data alignment problem
|
2013-11-03 10:41:24 -06:00 |
|
Gregory Nutt
|
93aae8c2c5
|
SAMA5 CAN: Add board-specific initialization logic
|
2013-11-03 10:03:52 -06:00 |
|
Gregory Nutt
|
a2b6d12271
|
Fix to SST25 driver to permit faster write modes. From David Sidrane
|
2013-11-02 08:27:13 -06:00 |
|
Gregory Nutt
|
861b8bd511
|
MTD config: Reduce configuration header overhead. From Ken Pettit
|
2013-11-01 12:22:55 -06:00 |
|
Gregory Nutt
|
7bbc46f721
|
Avoid calling pthread_join() to wait for USB MSC thread to terminate: This does not work if the caller of usb_mscuninitialize() is in a different task group than the MSC thread. From David Sidrane
|
2013-11-01 12:09:25 -06:00 |
|
Gregory Nutt
|
af4c5246b0
|
FAT: Fix error return value. In one failure case, success was being returned
|
2013-11-01 11:49:13 -06:00 |
|
Gregory Nutt
|
dae191ec3a
|
Updated spark configuration from David Sidrane, including new USB MSC configuration
|
2013-11-01 11:28:23 -06:00 |
|
Gregory Nutt
|
f8b3dbaa61
|
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
|
2013-11-01 11:16:51 -06:00 |
|
Gregory Nutt
|
b102d01046
|
The Mikroe STM32 F4 board now uses /dev/config for configuration data storage. From Ken Pettit
|
2013-11-01 07:50:35 -06:00 |
|
Gregory Nutt
|
b01900d7e6
|
Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit
|
2013-11-01 07:39:20 -06:00 |
|
Gregory Nutt
|
532d4c7cbe
|
arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null
ified later usbdev_unregister when the caller gets the error. From David Sidrane
|
2013-10-31 15:27:52 -06:00 |
|
Gregory Nutt
|
adeb33fdd2
|
Fix erase block vs page block confusion in MTD partition logic. From Ken Pettit
|
2013-10-31 10:40:10 -06:00 |
|
Gregory Nutt
|
aebeb50a91
|
SAMA5 PWM register definition header file
|
2013-10-31 10:33:43 -06:00 |
|
Gregory Nutt
|
37d8faff37
|
SAMA5 SSC: Add SSC register definition header file
|
2013-10-30 16:15:51 -06:00 |
|
Gregory Nutt
|
6b8c1cc480
|
CC3000 driver updates from David Sidrane
|
2013-10-30 10:50:26 -06:00 |
|
Gregory Nutt
|
8c5fc5fa88
|
Spark configuration updated by David Sidrane
|
2013-10-30 10:29:51 -06:00 |
|
Gregory Nutt
|
62edceecd4
|
Prep for release 6.31
|
2013-10-28 14:08:34 -06:00 |
|
Gregory Nutt
|
de234b3a89
|
Add for audio sub-format in audion system. From Ken Pettit
|
2013-10-28 12:11:52 -06:00 |
|
Gregory Nutt
|
3fd4629bd7
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
d812f25496
|
sched/sched_releasetcb.c: Fix an error handling case where a pthread start-up fails early, before the task type has been saved in the TCB. It is safer to use the sched_releasetcb() task type argument instead of relying on the task type in the TCB to be valid. Reported by David Sidrane
|
2013-10-27 17:22:28 -06:00 |
|
Gregory Nutt
|
1027d9f751
|
STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit
|
2013-10-27 16:23:44 -06:00 |
|
Gregory Nutt
|
376652f293
|
Updated Mikroe STM32F4 configuration from Ken Pettit
|
2013-10-27 08:06:39 -06:00 |
|
Gregory Nutt
|
5fe465749f
|
Updated VS1053 audio driver from Ken Pettit
|
2013-10-27 08:00:16 -06:00 |
|
Gregory Nutt
|
ff682d5292
|
SAMA5: Register definition file for camera interface
|
2013-10-26 08:25:58 -06:00 |
|
Gregory Nutt
|
8c094aeda8
|
CC3000 driver update from David Sidrane (part 2 of 2)
|
2013-10-25 16:39:27 -06:00 |
|
Gregory Nutt
|
ad3539209b
|
Updated Spark board configuration from David Sidrane
|
2013-10-25 15:51:38 -06:00 |
|
Gregory Nutt
|
f39467339e
|
Add ioctl to support software triggering of ADC/DAC conversions
|
2013-10-25 14:19:09 -06:00 |
|
Gregory Nutt
|
28d50790f2
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
18e651b670
|
KL25: Update build for compatibility with recent CC3000 changes
|
2013-10-24 13:59:53 -06:00 |
|
Gregory Nutt
|
aab5b6b2d9
|
SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling
|
2013-10-24 12:35:42 -06:00 |
|
Gregory Nutt
|
21c59c0aa7
|
Added support for the Olimex STM32 P207 board. From Martin Lederhilger
|
2013-10-24 08:48:04 -06:00 |
|
Gregory Nutt
|
f10069907a
|
Add support for the STM32F207ZE chip. From Martin Lederhilger
|
2013-10-24 08:25:05 -06:00 |
|
Gregory Nutt
|
ba5e6669d0
|
CC3000 driver update from David Sidrane
|
2013-10-24 08:03:32 -06:00 |
|
Gregory Nutt
|
f6f2d2b961
|
SAMA5 Timer/counter library
|
2013-10-23 14:53:37 -06:00 |
|
Gregory Nutt
|
fe0f5ce44b
|
STM32 F1 DAM fix from David Sidrane
|
2013-10-23 14:05:26 -06:00 |
|
Gregory Nutt
|
76764003a5
|
Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y
|
2013-10-23 11:48:57 -06:00 |
|
Gregory Nutt
|
e019782db5
|
Update Changelog
|
2013-10-23 09:13:28 -06:00 |
|
Gregory Nutt
|
e5c2496d6a
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
Gregory Nutt
|
f5674c21fa
|
SAMA5: Beginning of a CAN driver
|
2013-10-21 15:52:23 -06:00 |
|
Gregory Nutt
|
781119c0e6
|
SAMA5 CAN: Add register definition file
|
2013-10-21 12:22:27 -06:00 |
|
Gregory Nutt
|
545cef3223
|
scanf() fixes from kfrolov: 1) sscanf() function hangs in the following example: sscanf(2, %u,%u,%u,%u, ...), 2) sscanf() returns incorrect number of parsed numbers if some arguments can't be parsed: sscanf(=2, %u,%u,%u,%u,...)==1 instead of 0, and 3) using of char* instead of const char* in vsscanf function leads to warnings from GCC.
|
2013-10-21 10:41:15 -06:00 |
|
Gregory Nutt
|
ba1ea91e37
|
SAMA5 TC: Add timer/counter register definition file
|
2013-10-20 14:47:02 -06:00 |
|
Gregory Nutt
|
06c87638ae
|
SAMA5 demo configuration: TRNG and /dev/random are now enabled
|
2013-10-20 12:16:17 -06:00 |
|
Gregory Nutt
|
0ebdbfbc88
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
6ee8857f9b
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
Gregory Nutt
|
8954161288
|
SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality
|
2013-10-19 10:41:20 -06:00 |
|
Gregory Nutt
|
9e8bc003e5
|
Add instructions to enable RTC in the nsh/ configuration; RTC enabled by default in the demo configuration
|
2013-10-19 10:38:23 -06:00 |
|
Gregory Nutt
|
fc3889b154
|
Add CONFIG_DEBUG_RTC
|
2013-10-19 10:35:01 -06:00 |
|
Gregory Nutt
|
a1df31266c
|
SAMA5: Add GPBR register definitions
|
2013-10-19 10:22:21 -06:00 |
|
Gregory Nutt
|
6fda497bc1
|
Updated Spark/cc3000 files from David Sidrane
|
2013-10-18 17:14:58 -06:00 |
|
Gregory Nutt
|
b05bf917b8
|
SAMA5 RTC: Beginning of an RTC driver for the SAMA5
|
2013-10-18 16:56:46 -06:00 |
|
Gregory Nutt
|
f479f5d698
|
Enhanced the FAT32 filesystem code to understand DMA preflight failures, and to use the file sector buffer as a bounce buffer when a user-supplied buffer is not suitable for DMA. From Mike Smith
|
2013-10-18 08:38:44 -06:00 |
|
Gregory Nutt
|
6a524b5734
|
Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith
|
2013-10-18 08:24:18 -06:00 |
|
Gregory Nutt
|
46bf97abfc
|
Add SDIO preflight method
|
2013-10-18 08:15:09 -06:00 |
|
Gregory Nutt
|
944e0fe81d
|
Changes to stm32_dmacapable interfaces from Mike Smith
|
2013-10-18 08:06:23 -06:00 |
|
Gregory Nutt
|
973d11f625
|
STM32 DMA priority corrections from Mike Smith
|
2013-10-18 07:37:24 -06:00 |
|
Gregory Nutt
|
2b70abad0d
|
Typo fixes for UART7 and UART8 DMA configs. From Mike Smith
|
2013-10-18 07:17:55 -06:00 |
|
Gregory Nutt
|
b38468d49f
|
net_sendfile: Let the ACK callback handle the REXMIT flag and don't return until all data has been ACK'd. From Max Holtzberg
|
2013-10-17 09:54:48 -06:00 |
|
Gregory Nutt
|
8ca54913e2
|
Move tcp connection into SYN_RCVD state after aception instead of bypassing and moving directly into ESTABLISHED. From Max Holtzberg.
|
2013-10-17 09:49:33 -06:00 |
|
Gregory Nutt
|
cbed482747
|
TCP: Change how initial MSS is handled. From Max Holtzberg
|
2013-10-17 09:45:38 -06:00 |
|
Gregory Nutt
|
69dac5c775
|
In net_sendfile(), correct parameter passed to netdev_txnotifiy. From Max Holtzberg
|
2013-10-17 09:24:25 -06:00 |
|
Gregory Nutt
|
bf5ae4a374
|
Reset TCP timeout timer when data is ACKed, not when data is sent. From Max Holtzberg
|
2013-10-17 09:19:03 -06:00 |
|
Gregory Nutt
|
408ff55b7e
|
Changed net_close debug output to verbose. From Max Holtzberg (2013-10-17)
|
2013-10-17 09:13:31 -06:00 |
|
Gregory Nutt
|
4e3d02b216
|
Add support for the SST25VF016B serial FLASH. From Davide Sidrane
|
2013-10-16 08:28:58 -06:00 |
|
Gregory Nutt
|
6d3bb7f51c
|
SAMA5D3x-EK NxWM configuration: use 320x320 NuttX logo as the background
|
2013-10-15 16:11:33 -06:00 |
|
Gregory Nutt
|
96885a3afd
|
Use NxWidgets::CScaledBitmap to scale icons in the NxWM taskbar
|
2013-10-15 14:29:06 -06:00 |
|
Gregory Nutt
|
d19eb19af4
|
SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards
|
2013-10-13 18:49:32 -06:00 |
|
Gregory Nutt
|
fa71c8211c
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
02f7c5d8d5
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
edf984df2d
|
ENCX24J600: Improved descriptor handling, free packets on rx abort interrupt. From Max Holtzberg
|
2013-10-11 10:57:58 -06:00 |
|
Gregory Nutt
|
8f7c6e23a6
|
Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg
|
2013-10-11 10:48:00 -06:00 |
|
Gregory Nutt
|
ffdaa6b5c5
|
Notify the socket layer if a connection is lost before the monitoring callback has been registered. From Max Holtzberg
|
2013-10-11 10:04:54 -06:00 |
|
Gregory Nutt
|
e9187d3199
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
b641545f93
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
3b6e63199a
|
Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org
|
2013-10-09 07:35:00 -06:00 |
|
Gregory Nutt
|
baf1353743
|
SAMA5: Add an examples/nx configuration for testing the LCD
|
2013-10-08 16:52:21 -06:00 |
|