sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7,403 Commits 1 Branch 0 Tags 291 MiB
f924601fc1
Commit Graph

2256 Commits

Author SHA1 Message Date
Gregory Nutt
ed9756c137 MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers 2013-12-05 18:19:48 -06:00
Gregory Nutt
40e0253189 mkfatfs: Fix an error in logic that determines if FAT16 is possible 2013-12-05 18:17:22 -06:00
Gregory Nutt
692b087d07 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
68ccbc0855 Add drivers/mtd/README.txt 2013-12-04 07:46:10 -06:00
Gregory Nutt
0d8ac38e59 SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README 2013-12-02 17:22:55 -06:00
Gregory Nutt
5b9d07e5c0 NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered 2013-12-01 20:17:09 -06:00
Gregory Nutt
5c1f0946c2 NXFFS: First of many changes for NAND. NAND reports read errors on ECC failures. NXFFS can't just give up in these cases and must treat read failures like bad blocks 2013-12-01 18:22:33 -06:00
Gregory Nutt
5978e04411 ViewTool STM32F107: Add support for on-board LEDs and buttons 2013-11-30 14:15:15 -06:00
Gregory Nutt
22fb787c86 Basic board support for the ViewTool STM32F103/F107 board 2013-11-30 12:14:15 -06:00
Gregory Nutt
2aa0809e8b Inode semaphore must be entrant or a deadlock can occur in certain scenarios 2013-11-28 13:12:14 -06:00
Gregory Nutt
f171394ba9 STM32F429I-Discovery: Add support for external SST25 FLASH. From Ken Pettit 2013-11-28 08:21:15 -06:00
Gregory Nutt
755ee7f34b STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit 2013-11-28 08:13:59 -06:00
Gregory Nutt
a791b1070b Fix error in SMARTFS partition number reporting 2013-11-28 08:11:13 -06:00
Gregory Nutt
5a18f048ce Add MTD SST25 driver for larger SST25 parts. From Ken Pettit 2013-11-28 08:04:46 -06:00
Gregory Nutt
1fed0407b3 MTD: Pack the geometry structure so that is can handle larger erase blocks 2013-11-27 11:04:11 -06:00
Gregory Nutt
45a4eba015 SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support 2013-11-25 12:10:24 -06:00
Gregory Nutt
b6da35e12c Add a script to produce ctags. From Ken Pettit 2013-11-23 06:49:40 -06:00
Gregory Nutt
641a3387ab Add README file for SMARTFS. From Ken Pettit 2013-11-23 06:44:17 -06:00
Gregory Nutt
38042f641a LPC-H3131: SDRAM support (untested) 2013-11-21 06:37:50 -06:00
Gregory Nutt
8f0c334d04 ARM9: More cache control functions 2013-11-20 15:24:14 -06:00
Gregory Nutt
9e804749e9 Olimex LPC-H3131: Drop loops-per-second by a factor of 4. Why is the H3131 only 25% as fast as the EA3131 at the same clocking? 2013-11-19 15:54:23 -06:00
Gregory Nutt
c9c6d0c0d1 Olimex LPC_H3131: Add GPIO support for LEDs and for USB host power enable and overcurrent detection. 2013-11-19 15:52:10 -06:00
Gregory Nutt
da5670d10b LPC3131 EHCI: Add USB host tracing support 2013-11-19 15:48:02 -06:00
Gregory Nutt
448c8572cd Rethinking some NAND interfaces 2013-11-19 08:50:12 -06:00
Gregory Nutt
3faa880ef1 MTD NAND: Beginning of software ECC logic 2013-11-18 09:43:44 -06:00
Gregory Nutt
22d4eb9cca More NAND stuff 2013-11-17 14:35:57 -06:00
Gregory Nutt
d54832a942 More NAND stuff 2013-11-17 12:22:09 -06:00
Gregory Nutt
0e7a8668a5 Continuing NAND integration 2013-11-17 08:56:30 -06:00
Gregory Nutt
03b9f5a8e6 More NAND logic (still not complete) 2013-11-16 18:26:07 -06:00
Gregory Nutt
854e50b48e Further NAND support 2013-11-16 12:22:43 -06:00
Gregory Nutt
7ccbbe07cb Further NAND development 2013-11-16 11:46:35 -06:00
Gregory Nutt
c7657c9c5e EA3131: Framework for USB host support 2013-11-15 15:56:24 -06:00
Gregory Nutt
e53ba01b64 Add support for ONFI compatible NAND devices (NAND logic still incomplete) 2013-11-15 14:11:21 -06:00
Gregory Nutt
897572a552 Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h 2013-11-15 11:22:23 -06:00
Gregory Nutt
121de26583 SAMA5 NAND: Basic support for access to NAND FLASH 2013-11-15 09:30:05 -06:00
Gregory Nutt
517546bb47 tools/mkconfig.c: CONFIG_FS_SMARTFS must be included in the list of writable file systems 2013-11-15 07:33:39 -06:00
Gregory Nutt
fb2988042e FS mount logic: Fix error in conditional compilation. Reported by Daniel Palmer 2013-11-15 07:21:52 -06:00
Gregory Nutt
8353d234aa LPC31 EHCI: First cut at an EHCI driver for the LPC31 2013-11-14 16:12:22 -06:00
Gregory Nutt
b3faf95a7c LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools 2013-11-14 15:33:43 -06:00
Gregory Nutt
b7ef5917be SAMA5 PCK: Add support for programmable clock outputs 2013-11-14 11:16:04 -06:00
Gregory Nutt
bc58422444 STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file 2013-11-14 08:29:36 -06:00
Gregory Nutt
015072a4d4 fs/binfs/README.txt: Add a README file 2013-11-13 16:40:03 -06:00
Gregory Nutt
6e7c9b93c6 fs/procfs: Add a tiny, primitive procfs file system. Might get more interesting in the future 2013-11-13 15:59:14 -06:00
Gregory Nutt
5e4d01f626 SAMA5D3x-EK updated README 2013-11-12 17:00:37 -06:00
Gregory Nutt
2dec8fbf58 Various fixes from initial attempts to integrate the SAMA5 SSC/I2C driver with the I2C character driver loopback test 2013-11-11 15:18:57 -06:00
Gregory Nutt
0db55f5b4c STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit 2013-11-11 14:05:29 -06:00
Gregory Nutt
390378bfcf Remove unused apb_prepare function 2013-11-11 08:14:56 -06:00
Gregory Nutt
6e1523cc45 Support for the Atmel SAM4E family. From Mitko 2013-11-11 07:45:09 -06:00
Gregory Nutt
64a7e96f1f I2S simplifed audio buffer queuing 2013-11-10 14:51:33 -06:00
Gregory Nutt
725ef58a19 SAMA5 SSC: Add support for loopback mode. Plus unrelated Make.defs file from the last checkin 2013-11-10 11:46:45 -06:00
Gregory Nutt
8b73558ad7 Moved audio/buffer.c to libc/audio/lib_buffer.c so that it can be shared betweent he OS and applications in a kernel build 2013-11-10 11:20:06 -06:00
Gregory Nutt
926e91555d VS1053 worker thread stack size is now configurable; Worker thread is named via pthread_setname_np(). From Ken Pettit 2013-11-10 11:03:19 -06:00
Gregory Nutt
f7f5923d9d Freedom KL25Z: Add PWM support. From Alan Carvalho de Assis 2013-11-10 10:39:03 -06:00
Gregory Nutt
c9d3cdb85e Kinetis KL: PWM driver from Alan Carvalho de Assis 2013-11-10 10:34:45 -06:00
Gregory Nutt
f5c82c0df9 Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices 2013-11-10 10:24:09 -06:00
Gregory Nutt
4216e66fc7 STM32F429I-Discovery: Add support for the usbnsh and usbmsc configurations using the OTG HS peripheral in FS mode. From Ken Pettit. 2013-11-10 07:30:34 -06:00
Gregory Nutt
4db4c4d770 STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit 2013-11-10 07:23:06 -06:00
Gregory Nutt
ac120d60c3 SAMA5 I2S: Driver is code complete, untested and subject to some rethinking 2013-11-09 13:08:20 -06:00
Gregory Nutt
4171db9da2 Add an apps/examples/usbserial configuration for the Spark. From David Sidrane 2013-11-07 18:31:08 -06:00
Gregory Nutt
78a239f79e Add CDC/ACM serial driver for the Spark composite configuration 2013-11-07 17:39:13 -06:00
Gregory Nutt
d8d469fa58 STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane 2013-11-07 17:25:05 -06:00
Gregory Nutt
55b592faf8 Add support for the STM32F429I-Discovery board from Ken Pettit 2013-11-07 16:55:45 -06:00
Gregory Nutt
9d653bdfee Support for the STM32F429 from Ken Pettit 2013-11-07 16:47:43 -06:00
Gregory Nutt
4214dc9ce9 SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver 2013-11-07 12:26:53 -06:00
Gregory Nutt
143c8042b8 Initial I2S interface defintion 2013-11-07 09:39:46 -06:00
Gregory Nutt
e231270215 SAMA5 PWM: PWM driver is now functional 2013-11-07 09:17:46 -06:00
Gregory Nutt
3aa348035d SAMA5D3x-EK: Add support board-specific PWM testing 2013-11-06 14:38:19 -06:00
Gregory Nutt
b5791ac7a6 SAMA5 PWM: Driver now in build and configuration system 2013-11-06 12:24:51 -06:00
Gregory Nutt
e73d77c73f SAMA5 PWM: Add first cut at PWM driver 2013-11-06 10:55:12 -06:00
Gregory Nutt
f67ee984f3 Correct unitialization of composite USB device. A stale pointer was being reused. From David Sidrane 2013-11-05 09:12:08 -06:00
Gregory Nutt
4cb6c0ad80 STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane 2013-11-05 08:56:06 -06:00
Gregory Nutt
120075577f configs/mikroe-stm32f4/fulldemo updated by Ken Pettit 2013-11-04 09:29:27 -06:00
Gregory Nutt
14b4fa3c72 configs/sim/configdata: MTD configuration data driver unit test. From Ken Pettit 2013-11-04 09:17:31 -06:00
Gregory Nutt
a4a18241d5 Updated configuration driver from Ken Pettit 2013-11-04 08:52:16 -06:00
Gregory Nutt
b9130ff601 SAMA5 CAN: Fix a data alignment problem 2013-11-03 10:41:24 -06:00
Gregory Nutt
93aae8c2c5 SAMA5 CAN: Add board-specific initialization logic 2013-11-03 10:03:52 -06:00
Gregory Nutt
a2b6d12271 Fix to SST25 driver to permit faster write modes. From David Sidrane 2013-11-02 08:27:13 -06:00
Gregory Nutt
861b8bd511 MTD config: Reduce configuration header overhead. From Ken Pettit 2013-11-01 12:22:55 -06:00
Gregory Nutt
7bbc46f721 Avoid calling pthread_join() to wait for USB MSC thread to terminate: This does not work if the caller of usb_mscuninitialize() is in a different task group than the MSC thread. From David Sidrane 2013-11-01 12:09:25 -06:00
Gregory Nutt
af4c5246b0 FAT: Fix error return value. In one failure case, success was being returned 2013-11-01 11:49:13 -06:00
Gregory Nutt
dae191ec3a Updated spark configuration from David Sidrane, including new USB MSC configuration 2013-11-01 11:28:23 -06:00
Gregory Nutt
f8b3dbaa61 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
b102d01046 The Mikroe STM32 F4 board now uses /dev/config for configuration data storage. From Ken Pettit 2013-11-01 07:50:35 -06:00
Gregory Nutt
b01900d7e6 Add an MTD device wrapper that can used to provide a /dev/config that can be used for retaining configuration data. From Ken Pettit 2013-11-01 07:39:20 -06:00
Gregory Nutt
532d4c7cbe arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null 
ified later usbdev_unregister when the caller gets the error.  From David Sidrane
 2013-10-31 15:27:52 -06:00
Gregory Nutt
adeb33fdd2 Fix erase block vs page block confusion in MTD partition logic. From Ken Pettit 2013-10-31 10:40:10 -06:00
Gregory Nutt
aebeb50a91 SAMA5 PWM register definition header file 2013-10-31 10:33:43 -06:00
Gregory Nutt
37d8faff37 SAMA5 SSC: Add SSC register definition header file 2013-10-30 16:15:51 -06:00
Gregory Nutt
6b8c1cc480 CC3000 driver updates from David Sidrane 2013-10-30 10:50:26 -06:00
Gregory Nutt
8c5fc5fa88 Spark configuration updated by David Sidrane 2013-10-30 10:29:51 -06:00
Gregory Nutt
62edceecd4 Prep for release 6.31 2013-10-28 14:08:34 -06:00
Gregory Nutt
de234b3a89 Add for audio sub-format in audion system. From Ken Pettit 2013-10-28 12:11:52 -06:00
Gregory Nutt
3fd4629bd7 SAMA5 ADC: Seems functional in all modes including DMA 2013-10-28 10:08:12 -06:00
Gregory Nutt
d812f25496 sched/sched_releasetcb.c: Fix an error handling case where a pthread start-up fails early, before the task type has been saved in the TCB. It is safer to use the sched_releasetcb() task type argument instead of relying on the task type in the TCB to be valid. Reported by David Sidrane 2013-10-27 17:22:28 -06:00
Gregory Nutt
1027d9f751 STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit 2013-10-27 16:23:44 -06:00
Gregory Nutt
376652f293 Updated Mikroe STM32F4 configuration from Ken Pettit 2013-10-27 08:06:39 -06:00
Gregory Nutt
5fe465749f Updated VS1053 audio driver from Ken Pettit 2013-10-27 08:00:16 -06:00
Gregory Nutt
ff682d5292 SAMA5: Register definition file for camera interface 2013-10-26 08:25:58 -06:00
Gregory Nutt
8c094aeda8 CC3000 driver update from David Sidrane (part 2 of 2) 2013-10-25 16:39:27 -06:00
Gregory Nutt
ad3539209b Updated Spark board configuration from David Sidrane 2013-10-25 15:51:38 -06:00
Gregory Nutt
f39467339e Add ioctl to support software triggering of ADC/DAC conversions 2013-10-25 14:19:09 -06:00
Gregory Nutt
28d50790f2 SAMA5D3x-EK: Add support for app/examples/adc 2013-10-24 15:39:56 -06:00
Gregory Nutt
18e651b670 KL25: Update build for compatibility with recent CC3000 changes 2013-10-24 13:59:53 -06:00
Gregory Nutt
aab5b6b2d9 SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling 2013-10-24 12:35:42 -06:00
Gregory Nutt
21c59c0aa7 Added support for the Olimex STM32 P207 board. From Martin Lederhilger 2013-10-24 08:48:04 -06:00
Gregory Nutt
f10069907a Add support for the STM32F207ZE chip. From Martin Lederhilger 2013-10-24 08:25:05 -06:00
Gregory Nutt
ba5e6669d0 CC3000 driver update from David Sidrane 2013-10-24 08:03:32 -06:00
Gregory Nutt
f6f2d2b961 SAMA5 Timer/counter library 2013-10-23 14:53:37 -06:00
Gregory Nutt
fe0f5ce44b STM32 F1 DAM fix from David Sidrane 2013-10-23 14:05:26 -06:00
Gregory Nutt
76764003a5 Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y 2013-10-23 11:48:57 -06:00
Gregory Nutt
e019782db5 Update Changelog 2013-10-23 09:13:28 -06:00
Gregory Nutt
e5c2496d6a SAMA5 CAN: Driver is now code complete but still untested 2013-10-22 15:47:52 -06:00
Gregory Nutt
f5674c21fa SAMA5: Beginning of a CAN driver 2013-10-21 15:52:23 -06:00
Gregory Nutt
781119c0e6 SAMA5 CAN: Add register definition file 2013-10-21 12:22:27 -06:00
Gregory Nutt
545cef3223 scanf() fixes from kfrolov: 1) sscanf() function hangs in the following example: sscanf(2, %u,%u,%u,%u, ...), 2) sscanf() returns incorrect number of parsed numbers if some arguments can't be parsed: sscanf(=2, %u,%u,%u,%u,...)==1 instead of 0, and 3) using of char* instead of const char* in vsscanf function leads to warnings from GCC. 2013-10-21 10:41:15 -06:00
Gregory Nutt
ba1ea91e37 SAMA5 TC: Add timer/counter register definition file 2013-10-20 14:47:02 -06:00
Gregory Nutt
06c87638ae SAMA5 demo configuration: TRNG and /dev/random are now enabled 2013-10-20 12:16:17 -06:00
Gregory Nutt
0ebdbfbc88 SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral 2013-10-20 11:38:31 -06:00
Gregory Nutt
6ee8857f9b SAMA5: Initial WDT timer (untested) 2013-10-19 12:26:47 -06:00
Gregory Nutt
8954161288 SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality 2013-10-19 10:41:20 -06:00
Gregory Nutt
9e8bc003e5 Add instructions to enable RTC in the nsh/ configuration; RTC enabled by default in the demo configuration 2013-10-19 10:38:23 -06:00
Gregory Nutt
fc3889b154 Add CONFIG_DEBUG_RTC 2013-10-19 10:35:01 -06:00
Gregory Nutt
a1df31266c SAMA5: Add GPBR register definitions 2013-10-19 10:22:21 -06:00
Gregory Nutt
6fda497bc1 Updated Spark/cc3000 files from David Sidrane 2013-10-18 17:14:58 -06:00
Gregory Nutt
b05bf917b8 SAMA5 RTC: Beginning of an RTC driver for the SAMA5 2013-10-18 16:56:46 -06:00
Gregory Nutt
f479f5d698 Enhanced the FAT32 filesystem code to understand DMA preflight failures, and to use the file sector buffer as a bounce buffer when a user-supplied buffer is not suitable for DMA. From Mike Smith 2013-10-18 08:38:44 -06:00
Gregory Nutt
6a524b5734 Enhanced the mmcdd_sdio driver to perform DMA preflight operations and fail DMA read/write requests that fail preflighting. From Mike Smith 2013-10-18 08:24:18 -06:00
Gregory Nutt
46bf97abfc Add SDIO preflight method 2013-10-18 08:15:09 -06:00
Gregory Nutt
944e0fe81d Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
973d11f625 STM32 DMA priority corrections from Mike Smith 2013-10-18 07:37:24 -06:00
Gregory Nutt
2b70abad0d Typo fixes for UART7 and UART8 DMA configs. From Mike Smith 2013-10-18 07:17:55 -06:00
Gregory Nutt
b38468d49f net_sendfile: Let the ACK callback handle the REXMIT flag and don't return until all data has been ACK'd. From Max Holtzberg 2013-10-17 09:54:48 -06:00
Gregory Nutt
8ca54913e2 Move tcp connection into SYN_RCVD state after aception instead of bypassing and moving directly into ESTABLISHED. From Max Holtzberg. 2013-10-17 09:49:33 -06:00
Gregory Nutt
cbed482747 TCP: Change how initial MSS is handled. From Max Holtzberg 2013-10-17 09:45:38 -06:00
Gregory Nutt
69dac5c775 In net_sendfile(), correct parameter passed to netdev_txnotifiy. From Max Holtzberg 2013-10-17 09:24:25 -06:00
Gregory Nutt
bf5ae4a374 Reset TCP timeout timer when data is ACKed, not when data is sent. From Max Holtzberg 2013-10-17 09:19:03 -06:00
Gregory Nutt
408ff55b7e Changed net_close debug output to verbose. From Max Holtzberg (2013-10-17) 2013-10-17 09:13:31 -06:00
Gregory Nutt
4e3d02b216 Add support for the SST25VF016B serial FLASH. From Davide Sidrane 2013-10-16 08:28:58 -06:00
Gregory Nutt
6d3bb7f51c SAMA5D3x-EK NxWM configuration: use 320x320 NuttX logo as the background 2013-10-15 16:11:33 -06:00
Gregory Nutt
96885a3afd Use NxWidgets::CScaledBitmap to scale icons in the NxWM taskbar 2013-10-15 14:29:06 -06:00
Gregory Nutt
d19eb19af4 SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards 2013-10-13 18:49:32 -06:00
Gregory Nutt
fa71c8211c SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported 2013-10-13 13:08:05 -06:00
Gregory Nutt
02f7c5d8d5 SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes 2013-10-11 17:12:35 -06:00
Gregory Nutt
edf984df2d ENCX24J600: Improved descriptor handling, free packets on rx abort interrupt. From Max Holtzberg 2013-10-11 10:57:58 -06:00
Gregory Nutt
8f7c6e23a6 Changed the meaning of the uip_*input functions. They now return success when a packet is dropped; This is needed for the ENCX24J600 driver that must make a decision to return the packet or not: It should not retain dropped packets. From Max Holtzberg 2013-10-11 10:48:00 -06:00
Gregory Nutt
ffdaa6b5c5 Notify the socket layer if a connection is lost before the monitoring callback has been registered. From Max Holtzberg 2013-10-11 10:04:54 -06:00
Gregory Nutt
e9187d3199 SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work) 2013-10-10 18:44:08 -06:00
Gregory Nutt
b641545f93 SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM 2013-10-10 12:02:41 -06:00
Gregory Nutt
3b6e63199a Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org 2013-10-09 07:35:00 -06:00
Gregory Nutt
baf1353743 SAMA5: Add an examples/nx configuration for testing the LCD 2013-10-08 16:52:21 -06:00
Gregory Nutt
f8397f8238 SAMA5: LCDC driver incorporated into the build system. 2013-10-08 15:30:38 -06:00
Gregory Nutt
1807a662a8 SAMA5: LCD driver is code complete but untested 2013-10-08 12:16:30 -06:00
Gregory Nutt
d5ec15fc78 Update to net_close() improvement from Max Holtzberg 2013-10-08 09:14:27 -06:00
Gregory Nutt
423cc009ef Cosmetic changes to comments 2013-10-06 10:46:56 -06:00
Gregory Nutt
4c884a5079 Make net_close() nonblocking and free unestablished connections if no free connections available. From Max Holtzberg 2013-10-06 09:48:54 -06:00
Gregory Nutt
d3fa588250 SAMA5 LCDC: Add 'skeleton' files that will eventually become an LCDC driver for the SAMA5 2013-10-06 09:08:52 -06:00
Gregory Nutt
f6a90114b1 Use the new signature of rxnotify caused by the routing table. From Max Holtzberg 2013-10-06 07:38:15 -06:00
Gregory Nutt
52797b84a1 Another case where we should use the routing table: There may be multiple routers on the same network. In that case, we have to search for the routing table for the router that forwards to the destination address. We do this when we determine the MAC address we want in the ARP logic 2013-10-05 19:08:57 -06:00
Gregory Nutt
95ed790c54 netdev_findbyaddr() will not use a routing table if one is available. It will also make a better decision in the case there there is no routing table but only a single network interface. 2013-10-05 13:16:18 -06:00
Gregory Nutt
d7426cd34d SAMA5: Add LCD register definition header file 2013-10-04 10:11:12 -06:00
Gregory Nutt
0ff3852b2f Add a user interface to manage the routing table 2013-10-02 10:51:48 -06:00
Gregory Nutt
fee65851ca Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations 2013-10-02 08:24:46 -06:00
Gregory Nutt
6d2eba842c Add candidate net/route.h. Not yet integrated 2013-10-02 06:58:37 -06:00
Gregory Nutt
ca8ec81688 Partial implementation of a simple network routing table. 2013-10-01 18:55:20 -06:00
Gregory Nutt
a737c93ea2 SAMA5 touchscreen and ADC: A little more progress 2013-10-01 11:23:24 -06:00
Gregory Nutt
12c1aef7c2 Fix some funny 'cut' results 2013-09-30 19:28:46 -06:00
Gregory Nutt
3ea00af9aa net/net_sendfile: High performance sendfile is now functional. From Max Holtzberg 2013-09-30 14:37:04 -06:00
Gregory Nutt
50123bd30f Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis. 2013-09-30 09:20:11 -06:00
Gregory Nutt
744f3776b7 SAMA5: Framework for an touchscreen driver (incomplete) 2013-09-30 09:04:21 -06:00
Gregory Nutt
ecd7502c34 SAMA5 ADC: Framework for an ADC driver (incomplete) 2013-09-30 07:22:34 -06:00
Gregory Nutt
0e02d2b7b4 SAMA5 ADC: Beginning ADC register definition file 2013-09-29 18:34:09 -06:00
Gregory Nutt
c038f4efe0 Dependency generation fix for directories that keep object files in a sub-directory 2013-09-29 11:46:10 -06:00
Gregory Nutt
41f0c86cad Optimized sendfile() from Max Holtzberg 2013-09-28 14:47:49 -06:00
Gregory Nutt
f3a7625fca ENCX24J600: Use separate pools for RX and TX descriptors. From Max Holtzberg 2013-09-28 09:09:00 -06:00
Gregory Nutt
7b9b7cbdec configs/compal_e88 converted to use the kconfig-frontends tools 2013-09-27 16:12:44 -06:00
Gregory Nutt
d6503f4dd2 Add support for the Motorola C139 phone 2013-09-27 15:11:31 -06:00
Gregory Nutt
e1f9d22482 OS startup logic should not call group_setupidelfiles() if there is no file system support configured 2013-09-27 13:11:34 -06:00
Gregory Nutt
95bfcafb47 ENCX24J600: Remove poll for new TX data from TX done interrupt handling 2013-09-27 08:34:11 -06:00
Gregory Nutt
cdb56b81b8 Networking: Fix backward conditional in test to see if address is in ARP table. From Max Holtzberg 2013-09-27 08:27:35 -06:00
Gregory Nutt
95d462cb02 Networking: If sending out of the subnet, device lookup by IP will fail. Fall back to ETH0 for now. From Max Holtzberg 2013-09-27 08:21:33 -06:00
Gregory Nutt
e4af9572d0 Beginng of support for GMII/RGMII PHYs 2013-09-26 15:55:21 -06:00
Gregory Nutt
d417ff6460 SAMA5 GMAC: Initial driver check-in is just the EMAC driver forced to compile with the GMAC register definitions 2013-09-26 10:35:52 -06:00
Gregory Nutt
b3ecd158ac Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested 2013-09-25 18:50:14 -06:00
Gregory Nutt
fa027d30e0 Move apps/examples/cdcacm to apps/system/cdcacm 2013-09-25 17:23:03 -06:00
Gregory Nutt
0b450bc202 Move apps/examples/usbmsc to apps/system/usbmsc 2013-09-25 16:54:39 -06:00
Gregory Nutt
bbccd73dd0 SAMA5 EMAC: Need to pace RX and TX because and RX can result in a TX; Process TX interrupt events before TX interrupt events for the same reason 2013-09-25 14:22:35 -06:00
Gregory Nutt
22fe508443 Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled 2013-09-25 11:50:05 -06:00
Gregory Nutt
7affa54e7e Standardize stack checking interface 2013-09-24 11:45:13 -06:00
Gregory Nutt
368867f06e ENCx24J600 UDP backlog support from Maz Holtzberg 2013-09-24 09:03:16 -06:00
Gregory Nutt
c68c0cb268 SAMA5 HSMCI: Disable TX DMA. it is not reliable 2013-09-23 13:54:32 -06:00
Gregory Nutt
8f57ee9e07 ZKIT-ARM-1769: LED1 is now user controllable. From Rashid Fatah 2013-09-23 07:47:56 -06:00
Gregory Nutt
f22e60c392 Use a valid interval for the interrupt endpoint in the CDC/ACM driver 2013-09-22 11:35:44 -06:00
Gregory Nutt
3ceac07042 SAMA5 OHCI: Back out a change, the real root cause was a bug in the cache logic so the hack is no longer necessary 2013-09-22 07:53:51 -06:00
Gregory Nutt
9cb23c5ccb ARMv7-A: Fix some error in alignment to cache line boundaries in the cache operations 2013-09-21 15:47:00 -06:00
Gregory Nutt
34804c8ee7 SAMA5 OHCI: Fix some problems with D-Cache coherency and physical addressing related to interrupt endpoints 2013-09-20 15:22:09 -06:00
Gregory Nutt
ad1d9d2a44 Several usability improvements the SAMA5D3x-EK configurations 2013-09-20 12:37:36 -06:00
Gregory Nutt
5d0131fc73 Names of some USB device definitions changed to avoid collisions 2013-09-20 10:00:30 -06:00
Gregory Nutt
dbf07d6d01 SAMA5 OHCI: When UPLL drives OHCI the logically correct divider of 10 does not work; But a divider of 5 does. Why? 2013-09-19 16:10:46 -06:00
Gregory Nutt
ac3dfce614 Fix inconsistency in USB host tracing definitions 2013-09-19 08:46:33 -06:00
Gregory Nutt
0c62e5797e SAMA5: Add support for the FPU OS test 2013-09-18 10:35:03 -06:00
Gregory Nutt
8f88387712 LPC17xx SPI: Remove an unused static prototype that caused a compile time warning 2013-09-17 17:14:08 -06:00
Gregory Nutt
226839692d SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint 2013-09-17 10:55:13 -06:00
Gregory Nutt
af61f846f9 Freescale Kinetis KL25Z PIT and TPM module register definitions 2013-09-15 17:00:50 -06:00
Gregory Nutt
ed7c7a25e7 SAMA5 Ethernet: Add support for PHY interrupts 2013-09-15 12:24:42 -06:00
Gregory Nutt
5450d6405d Prep for release 6.30 2013-09-14 10:40:18 -06:00
Gregory Nutt
14b3417a85 SAMA5 EMAC: Create a empty, skeleton file that will eventually become the SAMA5 EMAC driver 2013-09-13 15:04:46 -06:00
Gregory Nutt
50f482f902 STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae 2013-09-13 12:45:33 -06:00
Gregory Nutt
b5bdde09cc STM32 Kconfig: Fix STM32 UART7/8 kconfig names and UART DMA. Provided by Lorenz Meier 2013-09-13 11:45:32 -06:00
Gregory Nutt
a28c697cfb ROMFS: Fix for file names longer than 15 characters. Provided by Lorenz Meier 2013-09-13 11:29:58 -06:00
Gregory Nutt
03413cb676 CDC/ACM: Backward condtional compilation fixed. Provided by Lorenz Meier 2013-09-13 11:27:03 -06:00
Gregory Nutt
b5254cc5af Make filter register accessible for CAN1 and CAN2. Provided by Lorenz Meier 2013-09-13 11:20:10 -06:00
Gregory Nutt
f2f40f35bd SAMA5: Beginning of EMAC and GMAC register definition header files 2013-09-12 15:45:12 -06:00
Gregory Nutt
0330eea54d SAMA5 TWI: Cleanup compilation errors that occur when I2C debug is enabled 2013-09-12 09:46:20 -06:00
Gregory Nutt
b3018d8bf0 Add support for the AT 24C512 EEPROM 2013-09-12 09:44:38 -06:00
Gregory Nutt
382a066eae SAMA5: Framework for a TWI driver (incomplete) 2013-09-11 12:28:52 -06:00
Gregory Nutt
e49069b92b SAMA5: TWI register definition file 2013-09-11 10:23:46 -06:00
Gregory Nutt
349677aaf9 Fix a reference counting error in the USB host mass storage class 2013-09-10 11:38:40 -06:00
Gregory Nutt
a992004b0e USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors 2013-09-09 10:00:16 -06:00
Gregory Nutt
9a9de5de81 Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration 2013-09-07 10:12:02 -06:00
Gregory Nutt
0585cd5692 Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output 2013-09-06 17:24:02 -06:00
Gregory Nutt
b95886626e Back-port some bugfixes from the ENCX24J600 to the ENC28J60 driver (unverified). From Max Holtzberg 2013-09-06 13:17:12 -06:00
Gregory Nutt
8912bcb1ea SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash 2013-09-06 13:07:29 -06:00
Gregory Nutt
d361bce93a Networking: Important bug fix. The backlog buffer pointer was not being incrmented so that only the first backlog buffer was getting added to the freelist. From Max Holtzberg 2013-09-06 11:43:59 -06:00
Gregory Nutt
e30cb1d470 SAMA5D3x-EK: Add a new 'demo' configuration 2013-09-06 11:40:46 -06:00
Gregory Nutt
abc006453f Networking: Fix race condition that can cause missing loss-of-connection events. From Max Holtzberg 2013-09-06 08:25:03 -06:00
Gregory Nutt
fb37248343 CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong. 2013-09-05 18:00:16 -06:00
Gregory Nutt
a5612af642 Rename examples/usbstorage to examples/usbmsc. From CCTSAO 2013-09-05 08:07:03 -06:00
Gregory Nutt
29d4748b1b Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis 2013-09-03 14:59:48 -06:00
Gregory Nutt
393b44f059 STM32 Timer Register Bit Definitions: Some CCER bit settings changed per SourceForge bug #18 submitted by CCCTSAO 2013-09-02 08:01:09 -06:00
Gregory Nutt
5c950889cf SAMA5 UDPHS: Support USPHS clock configuration 2013-09-01 11:29:51 -06:00
Gregory Nutt
ac130dc2f3 CDC/ACM Device: Fixe compilation errors when dual speed support is enabled 2013-09-01 11:27:59 -06:00
Gregory Nutt
147dc5206d Fix typo in Freedom KL25Z function name. From Alan Carvalho de Assis 2013-08-31 13:22:25 -06:00
Gregory Nutt
75c9ba5fbb Remove empty README.txt files 2013-08-31 13:17:04 -06:00
Gregory Nutt
3b1323a74b SAMA5: Initial framework for a UDPHS USB device side driver 2013-08-29 16:29:27 -06:00
Gregory Nutt
be88385911 SAMA5: Add high-speed USB register definition header file 2013-08-28 17:50:05 -06:00
Gregory Nutt
e862d5d197 SAMA5 EHCI: Implemented (but did not test) interrupt endpoint logic 2013-08-28 13:07:35 -06:00
Gregory Nutt
beb58c2520 SAMA5: Fixes a bug in the way that the heap regions were being allocated 2013-08-27 16:43:19 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
c5802dd5a0 Add hooks to select Cortex-A8 2013-08-27 08:46:37 -06:00
Gregory Nutt
12beaf4b1a Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
463c40c42e ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
Gregory Nutt
03ad60426d #17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO 2013-08-26 08:54:46 -06:00
Gregory Nutt
65c32bea59 Fix an bug where long ROMFS file names are not read correctly. From Mike Smith 2013-08-25 16:58:41 -06:00
Gregory Nutt
70be601ea2 Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg 2013-08-25 11:21:54 -06:00
Gregory Nutt
f1a20f49ff SAMA5 OHCI: Fix semaphore handling bug. OHCI is now function by itself again after changes to integrate with EHCI 2013-08-25 08:57:35 -06:00
Gregory Nutt
20b1b584e7 Network ARP harvesting: Corect backward condition in netmask task. From Max Holtzberg 2013-08-25 07:33:47 -06:00
Gregory Nutt
cd84d1bec4 SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt 2013-08-24 11:34:24 -06:00
Gregory Nutt
2d5313a931 Fix #endif with missing #if condition. Reported by Andrew Bradford 2013-08-23 16:40:30 -06:00
Gregory Nutt
db1b3c421b SourceForge bug #16 Fix IO pin map. Add CONFIG_SERIAL_TERMIOS support. From CCTSAO 2013-08-23 11:48:53 -06:00
Gregory Nutt
f356586fd3 SAMA5 EHCI: No complete for bulk and control endpoints 2013-08-22 13:36:16 -06:00
Gregory Nutt
320a2e2a0a Beginning of support for SAMA5 EHCI. Not much there yet 2013-08-20 15:46:36 -06:00
Gregory Nutt
19d7c90d4e USB host: Add device address management support in preparation for USB hub support 2013-08-18 14:31:57 -06:00
Gregory Nutt
dc07d65e14 STM32 F1 I2C: Fix a typo that crept in with some recent changes. From Yiran Liao 2013-08-18 07:45:14 -06:00
Gregory Nutt
e2f68ac85f Add EHCI header file (not quite complete) 2013-08-17 14:19:18 -06:00
Gregory Nutt
11086f34d0 SAMA5 OHCI: Driver is now basically functional 2013-08-16 13:13:21 -06:00
Gregory Nutt
10daf06976 STM32 SPI: nbits interface extended to handle LSB- or MSB-first operation. From Teemu Pirinen 2013-08-16 11:35:22 -06:00
Gregory Nutt
79d5239023 SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary 2013-08-14 12:23:06 -06:00
Gregory Nutt
3f4b90cc3b SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port. 2013-08-13 16:48:14 -06:00
Gregory Nutt
1700d06d89 Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports. 2013-08-13 15:03:46 -06:00
Gregory Nutt
9220a748bd Fix re-entry problem in SAMA5 up_putc 2013-08-13 09:42:40 -06:00
Gregory Nutt
1ec49f08b4 STM32 F3 fixes from John Wharington 2013-08-13 07:48:18 -06:00
Gregory Nutt
120a3604c9 More changes to USB host interface to support multiple downstream ports 2013-08-12 16:29:33 -06:00
Gregory Nutt
a384129490 Convert olimex-stm32-p107/nsh configuration to use kconfig-frontends tool. From Max Holtzberg 2013-08-12 15:00:28 -06:00
Gregory Nutt
e09bd50fdd First of several changes needed to support multiple USB host root hubs 2013-08-12 14:44:06 -06:00
Gregory Nutt
0da218483d SAMA5: Add logic to control VBUS power for OHCI 2013-08-12 11:59:10 -06:00
Gregory Nutt
e2d7ab9487 SAMA5: Add support for initialization of the USB host and mass storage class 2013-08-11 17:52:36 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
544185c683 Added option to disable STM32 serial port re-ordering 2013-08-10 19:29:44 -06:00
Gregory Nutt
0f20d4581b Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier 2013-08-10 19:21:39 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
efabe4aaff SAMA5: Centralize logic for conversion between physical and virtual addresses 2013-08-09 17:25:53 -06:00
Gregory Nutt
619cd66f33 Fix some cache-related issues with the SAMA5 DMA driver 2013-08-09 15:25:13 -06:00
Gregory Nutt
bfaf64e54e Fix SAM bug: Parmaters reversed in DMA function call 2013-08-06 15:47:09 -06:00
Gregory Nutt
b0e8231fa3 SAM3,4,A5 DMAC driver fixes 2013-08-06 13:27:48 -06:00
Gregory Nutt
6a429e675f SAM3,4,A5: Fix some masked status checks that can generate false error reports 2013-08-06 12:36:56 -06:00
Gregory Nutt
fa011d9aca SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts 2013-08-06 10:20:17 -06:00
Gregory Nutt
369bf26b20 SAMA5: Add HSMCI memory card driver support 2013-08-05 16:21:24 -06:00
Gregory Nutt
8c88dcd0c7 SAMA5: SPI Driver + AT25 FLASH work; SAM3/4: Correct an error, SPI will not be correctly configured if CONFIG_SPI_OWNBUS=n 2013-08-05 10:29:43 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
1060b232e9 SAMA5: Add register level debug option for SPI 2013-08-04 14:45:24 -06:00
Gregory Nutt
83af194db1 SAMA5: SPI driver now supports both SPI0 and SPI1 2013-08-04 12:50:20 -06:00
Gregory Nutt
163ec613b1 SAMA5: Add basic SPI suppport (untested) 2013-08-04 11:08:20 -06:00
Gregory Nutt
1ea55fc2a7 SAMA5: Add DMA suppport (untested) 2013-08-04 10:44:18 -06:00
Gregory Nutt
5cdc3db214 SAMA5: Add DMA controller register definitions 2013-08-03 12:13:42 -06:00
Gregory Nutt
6422792f57 Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts 2013-08-03 08:22:37 -06:00
Gregory Nutt
3ee10f0f08 Correct some typos int he MPADDRCS register address definitions 2013-08-02 12:06:11 -06:00
Gregory Nutt
2feb83a2f8 SAMA5: More MMU-related changes to properly initialize SDRAM 2013-08-02 11:11:57 -06:00
Gregory Nutt
2ac9669a87 SAMA5: Add logic to initialize SAMA5D3x-EK on-board SDRAM 2013-08-01 16:58:55 -06:00
Gregory Nutt
8b8fe4d073 SAMA5: Add DDR controller register definitions 2013-08-01 12:27:41 -06:00
Gregory Nutt
b148465beb ARMv7-A: Map all of .text, .bss, .data., stacks before enabling the MMU and caching. This is simpler and avoids fears I have about caching 2013-08-01 10:05:33 -06:00
Gregory Nutt
f2195a16b2 ARMv7-A: Separate CONFIG_PAGING start-up logic into a different startup file. Too much conditional compilation. 2013-08-01 07:41:00 -06:00
Gregory Nutt
8b44b8fce7 Prep for NuttX-6.29 release 2013-07-31 14:25:06 -06:00
Gregory Nutt
ffdd034c35 SAMA5: Add an NSH configuration of the SAMA5D3x-EK board 2013-07-31 10:46:13 -06:00
Gregory Nutt
2c6b370c4a Add ARMv7-A irqdisable() inline function 2013-07-30 11:37:09 -06:00
Gregory Nutt
5a94767c52 STM32 F3 I2C driver from John Wharington 2013-07-30 10:35:17 -06:00
Gregory Nutt
b57f54fbd0 STM32 DAC DMA fixes from John Wharington 2013-07-30 08:54:32 -06:00
Gregory Nutt
36b1cd0a6b SAMA5: Separate cache operations into separate files 2013-07-29 18:38:02 -06:00
Gregory Nutt
1728594259 SAMA5: Add a little NuttX debug program to help debugger programs in NOR flash 2013-07-29 13:57:32 -06:00
Gregory Nutt
f96c6793b9 Add SAMA5 HSMC register definitions and logic to reconfigure the NOR FLASH 2013-07-29 10:56:21 -06:00
Gregory Nutt
4ba648aaae SAMA5: Add file structure to support board-specific initialization of NOR flash 2013-07-29 07:41:53 -06:00
Gregory Nutt
9a94a3707c SAMA5: The ostest configuration have been converted to run out of NOR flash. There is more to be done, however 2013-07-28 15:07:35 -06:00
Gregory Nutt
7dc8dd4b50 SAMA5: Correct a clock configuration bug; clarify some MMU memory types 2013-07-28 12:44:06 -06:00
Gregory Nutt
dc92037e67 Add a hello world configuration to help with the SAMA5 bringup 2013-07-26 15:28:01 -06:00
Gregory Nutt
70f0ffdfc5 Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
55df28dbcf Fix an uninitialized register error that crept into the ARM9 start up code many years ago and was recently cloned into the Cortex-A5. Obviously no on has used NuttX with ARM9 for years 2013-07-24 20:12:04 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
04b3bb1826 Revamp the way external memory regions are configured; Add logic to add SAMA5 external memory regions to the heap 2013-07-24 10:08:32 -06:00
Gregory Nutt
535048a73c Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A 2013-07-23 17:52:06 -06:00
Gregory Nutt
812bf02972 ARMv7-A: Need 8-byte stack alignment when callign C code from interrupt handlers. This change needs to be ported to other ARM architectures as well 2013-07-23 14:47:16 -06:00
Gregory Nutt
14df812735 SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR 2013-07-23 13:54:49 -06:00
Gregory Nutt
afdd6320ee Add SAMA5D3 pin multiplexing definitions 2013-07-23 09:47:01 -06:00
Gregory Nutt
f07d09aa48 Add SAMA5 GPIO configuration support 2013-07-22 20:59:47 -06:00
Gregory Nutt
339a55f1ea Add support SAMA5 UART and serial driver 2013-07-22 19:16:37 -06:00
Gregory Nutt
e67d610347 SAMA5 clock configuration should now agree with Atmel sample code; Added header file with macros to enable and disable peripheral clocking 2013-07-22 17:00:02 -06:00
Gregory Nutt
a9b0f304e6 Add SAMA5 clock logic. Cloned from SAM3U and not yet verified 2013-07-22 14:42:05 -06:00
Gregory Nutt
1350b2a576 SAMA5 interrupt handling logic 2013-07-22 11:54:39 -06:00
Gregory Nutt
87f54f7d0b Add system timer logic for the SAMA5 2013-07-21 15:49:17 -06:00
Gregory Nutt
543b5b7e03 A few more Cortex-A5 and SAMA5 files 2013-07-21 12:52:38 -06:00
Gregory Nutt
66259bfc53 Misc Cortex-A5 changes include new file for cache operations 2013-07-20 13:06:00 -06:00
Gregory Nutt
4a81d47c86 Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular 2013-07-19 15:23:03 -06:00
Gregory Nutt
8f2ad7eec1 Some initial frame for Cortex-A5 support. No much yet 2013-07-18 15:20:47 -06:00
Gregory Nutt
c960273afd Build/test framework for the Zmodem sz and rz commands which are on their way 2013-07-12 16:01:37 -06:00
Gregory Nutt
352c313fa7 Fix typo/compilation error with USB device DMA memory allocation is enabled 2013-07-12 07:09:24 -06:00
Gregory Nutt
c6b141d190 Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao 2013-07-09 07:59:28 -06:00
Gregory Nutt
7536b4654b Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao 2013-07-08 08:55:05 -06:00
Gregory Nutt
4d8a4b69a4 Add CRC16 support 2013-07-07 17:35:35 -06:00
Gregory Nutt
25c393f371 prohibit re-entrance into sam_configgpio() 2013-07-05 17:15:54 -06:00
Gregory Nutt
37ed44a1ee Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
94e2f4ceb4 Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver 2013-07-03 08:12:45 -06:00
Gregory Nutt
e1dab23711 Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
8b68ea2f94 Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
8ba8ad39f9 SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further 2013-06-28 17:07:58 -06:00
Gregory Nutt
2ba00060bc SAM33/4: Need to disable write protection before modify PIO pin configuration 2013-06-28 15:34:51 -06:00
Gregory Nutt
3505ca7556 Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general 2013-06-28 14:32:08 -06:00
Gregory Nutt
e0310e2cc8 Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
bc7ac20616 Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
d4b7efb34e Add SAM3X/3A pin multiplexing and GPIO encoding header files 2013-06-26 17:02:43 -06:00
Gregory Nutt
f668abaed1 Add SAM3X/3A memory map 2013-06-26 14:37:57 -06:00
Gregory Nutt
3692dfaf26 Add SAM3X/3A peripheral clock controls 2013-06-26 14:00:26 -06:00
Gregory Nutt
b089263e1c Add SAM3X/3A interrupt vectors 2013-06-26 12:59:56 -06:00
Gregory Nutt
18240b07b6 Add support for SAM3X and 3A chips, interrupts, and peripheral IDs 2013-06-26 12:28:32 -06:00
Gregory Nutt
450862a944 Add support fo SAM4S Xplained SRAM 2013-06-26 10:57:25 -06:00
Gregory Nutt
3d1f29217e Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory 2013-06-25 09:13:30 -06:00
Gregory Nutt
3d975e0a08 Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes 2013-06-24 12:37:02 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
8959fffedc SAM4L Xplained SLCD driver is complete 2013-06-23 09:05:20 -06:00
Gregory Nutt
d7ec0089a7 Fix for ENC28J60 from Dave 2013-06-22 08:55:16 -06:00
Gregory Nutt
5152ce9f79 Beginning of a driver for the SAM4L LED1 module 2013-06-21 17:42:09 -06:00
Gregory Nutt
add0a67995 Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes 2013-06-21 09:32:57 -06:00
Gregory Nutt
b14f0cf9f7 KL25Z GPIO register dump function now compiles 2013-06-20 18:00:56 -06:00
Gregory Nutt
d5a0c75bbb Add framework for managing SPI-related discretes on the Freedom KL25Z board. 2013-06-20 13:50:16 -06:00
Gregory Nutt
2cfeed654a Add SAM4L PDCA register definition file 2013-06-19 18:38:31 -06:00
Gregory Nutt
3ed35802ce SPI register definition file updated to include a few differences for the SAM4L 2013-06-19 16:03:19 -06:00
Gregory Nutt
2ede49fd6a SAM4L LCDCS register definitions 2013-06-19 13:59:47 -06:00
Gregory Nutt
2a2de71b5d Add SPI driver for the Freescale KL25Z 2013-06-19 12:10:01 -06:00
Gregory Nutt
f597172733 Add SPI register definitions for the Freescale KL25Z 2013-06-19 09:56:32 -06:00
Gregory Nutt
69fc11bb71 Fix test of NULL pointer in the SAM3/4 SPI driver 2013-06-18 12:16:52 -06:00
Gregory Nutt
177a8c0e9b Freescale KL25Z support from Alan Carvalho de Assis 2013-06-18 11:20:57 -06:00
Gregory Nutt
39dcedb0f1 SAM3/4 SPI phase control (CPHA) is inverted 2013-06-18 09:29:55 -06:00
Gregory Nutt
15e846ad1d Corrections to the Kinetis TSI header file from Alan Carvalho de Assis 2013-06-18 07:14:05 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
8db5d403ee SAM3U-EK board now runs at 96MHz 2013-06-17 08:41:52 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
44fe999aea Add support for the SAM4L Xplained Pro I/O1 module 2013-06-15 10:56:08 -06:00
Gregory Nutt
aaf102b5c8 Prep for 6.28 release 2013-06-14 14:30:00 -06:00
Gregory Nutt
1f056e3826 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
fa45b86b4d SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional 2013-06-12 10:56:42 -06:00
Gregory Nutt
1ca5db1ebc Changes for a clean build of configs/sam4s-xplained 2013-06-11 17:33:43 -06:00
Gregory Nutt
54c777ef0d SAM4S: Add macros to manage peripheral clocks 2013-06-11 15:42:30 -06:00
Gregory Nutt
03698ca7e2 SAM4S: Add pin multiplexing definitions 2013-06-11 14:32:07 -06:00
Gregory Nutt
ce8b9c0d3c SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
da0526f0bd Add a directory to hold configurations for the SAM4S Xplained board 2013-06-10 18:20:30 -06:00
Gregory Nutt
bafe910ce4 SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
76867c132e Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC 2013-06-10 11:57:37 -06:00
Gregory Nutt
3938eeeb96 SAM4L: Extend interrupt support for the larger number of NVIC interrupts of the SAM4L 2013-06-09 13:00:38 -06:00
Gregory Nutt
3eefc08c12 SAM4L: Add an NSH configuration and C++ support 2013-06-09 11:43:20 -06:00
Gregory Nutt
cc8906e701 SAM3U/4L changes to hide differences by clocking in those MCUs 2013-06-08 13:50:42 -06:00
Gregory Nutt
88226dd5b1 SAM4L: Add USART/UART register definition header files 2013-06-08 11:39:06 -06:00
Gregory Nutt
fe868bc8b2 SM4L: USB clock configuration and WDT register definition file 2013-06-08 09:21:20 -06:00
Gregory Nutt
2864dfac0d Add SAM4L BSCIF register definition file 2013-06-06 16:24:33 -06:00
Gregory Nutt
168702f7e1 Fix a backward conditional that cause the STM32 usb host driver to fail to detect disconnection events. From Scott 2013-06-06 15:00:18 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
e352d4f3ad Add register definitions for SAM4L BPM and SCIF blocks; SAM4L clock initialization now selects an optimal power scaling mode 2013-06-06 11:18:52 -06:00
Gregory Nutt
93b67f1598 Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
Gregory Nutt
19b38fa95f Add power management register defintions and clock control logic for the SAM4L 2013-06-05 13:35:19 -06:00
Gregory Nutt
efce99ba6f SAM4L GPIO port addressing fixes; SAM4L Xplained LED support; minor documentation updates 2013-06-05 08:54:37 -06:00
Gregory Nutt
7ddaf6efc7 Add SAM4L GPIO driver 2013-06-04 15:12:56 -06:00
Gregory Nutt
e35d569477 Create SAM4L GPIO driver header file 2013-06-04 13:33:30 -06:00
Gregory Nutt
1d8c8c0999 If CONFIG_STM32_DMACAPABLE is defined, use stm32_dmacapable to workaround attempt SPI DMAs from the CCM stack 2013-06-04 09:05:39 -06:00
Gregory Nutt
e023ccf016 Add stm32_dmacapable interface to determine is it is possible to perform DMA from a given address. 2013-06-04 08:44:49 -06:00
Gregory Nutt
29de68525d SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console 2013-06-03 17:53:05 -06:00
Gregory Nutt
a732e03139 Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
081d3f989d Add vector and chip cability definitions for the SAM4L family 2013-06-03 11:23:41 -06:00
Gregory Nutt
3613d6ed8b Add interrupt and memory map definitions for the AT91SAM4L 2013-06-03 09:32:04 -06:00
Gregory Nutt
961837eaaf Fix an assertion 2013-06-02 16:49:41 -06:00
Gregory Nutt
44450511d4 Add dprintf() and vdprintf() 2013-06-02 15:49:52 -06:00
Gregory Nutt
5f97fb8041 Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
Gregory Nutt
7bfa4e299c Add missing NSH configuration settings. Correct some conditional logic for STM32 FALSH pre-fetch settings. From Lorenz Meier 2013-06-02 13:16:35 -06:00
Gregory Nutt
b20b0a1839 Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_ 2013-06-02 13:04:40 -06:00
Gregory Nutt
28c64c90bd Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool 2013-06-02 10:33:57 -06:00
Gregory Nutt
617ddcc103 Add NRF24L01 terminal example. From Laurent Latil. 2013-06-01 08:23:06 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
aa9589ac8f Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class 2013-05-29 10:26:00 -06:00
Gregory Nutt
680e570cc4 Add support for the STM32 Tiny development board from Laurent Latil 2013-05-28 14:24:17 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
d4e7f7fa94 Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional. 2013-05-26 16:44:53 -06:00
Gregory Nutt
777e0c5da0 Extentions SCLD test; SCLD CODEC and LCD1602 driver bug fixes 2013-05-26 09:28:57 -06:00
Gregory Nutt
3cbb22038a PCB-Logic PIC32MX LCD1602 driver now supports SLCD CODED; Added an SLCD ioctl command to get cursor position 2013-05-25 13:46:43 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
bc4e519042 Additional bug fixes and minor extensions to the STM32L-Disovery segment LCD support and to the apps/examples/slcd segment LCD test. 2013-05-24 12:00:15 -06:00
Gregory Nutt
5bb3a187ef Add apps/examples/slcd, Remove USB from STM32L-Discovery, LSE support for the STM32 L family, some STM32L-Discovery LCD debug changes 2013-05-24 10:00:54 -06:00
Gregory Nutt
4da4094c0d Add SLCD ioctl commands 2013-05-23 18:25:02 -06:00
Gregory Nutt
d69228b5f7 poll again; if fd is less than zero, it should set revents to zero, not POLLNVAL 2013-05-23 15:41:15 -06:00
Gregory Nutt
abf8c8a13a STM32L-Discovery LCD driver is code compele but untested 2013-05-23 15:23:29 -06:00
Gregory Nutt
c1f6d50093 Add logic to encode/decode special SLCD actions 2013-05-23 10:23:41 -06:00
Gregory Nutt
b5dd706120 poll needs to set POLLNVAL if file descriptor is bad 2013-05-23 07:48:32 -06:00
Gregory Nutt
9d280a58aa When readahead data is available, poll needs to return POLLIN or POLLRDNORM, not POLLOUT 2013-05-23 07:16:46 -06:00
Gregory Nutt
16d04c7aa7 poll should ignore invalid file descriptors 2013-05-23 07:02:44 -06:00
Gregory Nutt
eb35cbf558 Beginning of a segment LCD driver for the STM32L-Discovery 2013-05-22 18:12:54 -06:00
Gregory Nutt
5de77eefcb Add TCP echo example for the LM3S6965-EK. From Max Holtzberg 2013-05-22 07:45:03 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
2941b673fd Add UDP discovery example for the LM3S6965-EK. From Max Holtberg 2013-05-21 12:51:27 -06:00
Gregory Nutt
28112cea0f Add STM32L15X segment LCD register definitions; Updated documentatin and README files 2013-05-21 12:39:48 -06:00
Gregory Nutt
e4d906960a Fix STM32L15X vector definitions; Fix STM32L-Discovery LED controls. The NSH configuration is now fully functional on the STM32L-Discovery board. 2013-05-21 11:25:30 -06:00
Gregory Nutt
b475e965a6 Internal FLASH MTD driver for TI/Stellaris from Max Holtzberg 2013-05-20 12:47:54 -06:00
Gregory Nutt
5b86207177 Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit 2013-05-19 15:12:28 -06:00
Gregory Nutt
d581b9a849 Fixes for typos and errors in audio.h from Ken Pettit 2013-05-19 15:01:14 -06:00
Gregory Nutt
c193d3fad3 Add STM32L152X RCC PLL and FLASH support. Now compiles errorfree. 2013-05-19 14:35:30 -06:00
Gregory Nutt
63679d05a6 STM32L15X UART, DMA, and heap initialization support 2013-05-19 11:54:56 -06:00
Gregory Nutt
5d80dfd129 Add SYSCFG definitions for STM32L152; Add board support STM32L-Discovery 2013-05-19 11:04:19 -06:00
Gregory Nutt
e5b21a96d4 Add PWR and RCC register definitions for the STM32F152 2013-05-19 08:55:36 -06:00
Gregory Nutt
66b8913e18 Add STM32L15X memory map 2013-05-18 16:08:28 -06:00
Gregory Nutt
97844b79a1 Add support for STM32L15X GPIOs 2013-05-18 15:32:50 -06:00
Gregory Nutt
96b91d5dc7 Support for STM32L15xx interrupt vectors 2013-05-18 12:56:03 -06:00
Gregory Nutt
7629593f72 Begnning of support for the STM32L15X family 2013-05-18 11:15:37 -06:00
Gregory Nutt
ae75e9c4fb Add kernel build support and a kernel most OS test example for the Mikroe STM32 M4 board. From Ken Pettit 2013-05-17 14:59:21 -06:00
Gregory Nutt
113a696f31 Fix compile errors when the on_exit() interface is enabled in the kernel build. From Ken Pettit 2013-05-17 11:21:29 -06:00
Gregory Nutt
b80707ea78 Add support for R61505U LCD controller on HY-mini STM32v board 2013-05-16 14:06:16 -06:00
Gregory Nutt
c5d613dc6a Updated to hymini-stm32v configuration from Laurent Latil 2013-05-15 16:33:49 -06:00
Gregory Nutt
9de230d9a3 Fix STM32 F1 DMA register definitions. From Laurent Latil. 2013-05-15 16:11:16 -06:00
Gregory Nutt
afa05e4c9b hymini-stm32v: Remove nx and nxlines configurations 2013-05-14 08:32:13 -06:00