jeditekunum
b050703849
First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board.
2015-01-24 14:31:35 -06:00
Gregory Nutt
72a194ef39
Remove the px4-v2_upstream configuration. Moved to misc/Obsoleted/configs.
...
This is not the official configuration for the PX4 board and has led to confusion by NuttX users. The board configuration also requires some ongoing maintenance and customization to support ongoing PX4 testing and evaluation. It is best retained the PX4 repositories where it can be properly maintained and not in the upstream NuttX repository.
2015-01-14 09:54:51 -06:00
Gregory Nutt
a1bff3f9eb
Remove menuconfig warning
2014-12-31 07:31:49 -06:00
Gregory Nutt
4e8a4b073d
Fire STM32v2: Fix missing stuff in Kconfig file
2014-12-28 18:29:13 -06:00
Gregory Nutt
34617b7ef0
Cloudctrl: Add missing configuration logic
2014-12-28 17:51:11 -06:00
Gregory Nutt
91bc8712ef
Fix columnar alignment in Kconfig file. From David Sidrane
2014-12-26 08:37:27 -06:00
Gregory Nutt
09b16e3819
Remove packaging indications for TM4C129 configuration variables
2014-12-16 16:22:52 -06:00
Gregory Nutt
ca757af8fb
Add basic board support for the DK-TM4C129X Connected Development Kit. The initial commit is simply the TM4C123G Launchpad with naming changes
2014-12-16 15:29:14 -06:00
Gregory Nutt
70981eb7d5
Initial support for the LPC4357-EVB provided by Toby Duckworth
2014-11-26 15:18:24 -06:00
Gregory Nutt
a78ad24213
If SAM4E-EK is selected, then configs/Kconfig must select ARCH_PHY_INTERRUPT
2014-11-25 08:08:58 -06:00
Gregory Nutt
3c6dd42e28
Remove stm32f100rc_generic board configuration
2014-11-10 07:48:48 -06:00
Gregory Nutt
e1fcd2b550
STM32GG Starter Kit: Add basic NSH configuration
2014-11-03 16:58:22 -06:00
Gregory Nutt
4384a26c88
Fix typo introduced into a Kconfig file in the last few days. Thanks to Sebastien Lorquet
2014-10-30 08:18:58 -06:00
Gregory Nutt
628ad4c975
Kconfig: Allow select of standard board properties for custom board
2014-10-24 09:57:32 -06:00
Gregory Nutt
c8b4ab7383
Add README for non-existent port to the EFM32GG-STK3700; fix typos in related README files
2014-10-22 14:32:25 -06:00
Gregory Nutt
d930f2cdbc
EFM32: Add buton interrupt handling for the Olimex board
2014-10-21 13:51:30 -06:00
Gregory Nutt
01984fe6e7
Add board support for the Olimex EFM32G8809128 STK
2014-10-20 12:00:37 -06:00
Gregory Nutt
be389f411b
Add configuration support for the EFM32 Gecko Starter Kit
2014-10-17 09:25:52 -06:00
Gregory Nutt
5dd5290883
Rename configs/nucleo-f401re to configs/nucleo-f4x1re
2014-10-15 07:05:08 -06:00
Gregory Nutt
e659533329
Extend the Nucleo-F401RE configuration to also support the Nucleo-F411RE. From Serg Podtynnyi
2014-10-14 17:32:13 -06:00
Gregory Nutt
d573f5a96c
Remove the 16z board support from the main source tree. It is still avaialable in the misc/Obsoleted directory
2014-09-05 07:59:31 -06:00
Gregory Nutt
23147c40a5
Remove final traces of the 8015 from the NuttX source tree
2014-09-01 13:21:15 -06:00
Gregory Nutt
c3a498264e
CC3200 Launchpad updates
2014-08-26 16:31:47 -06:00
Gregory Nutt
b831f241d8
Add basic support for the CC3200 Launchpad. From Jim Ewing
2014-08-26 15:36:02 -06:00
Gregory Nutt
ed2d8e438e
Fix some SAMA5 configuration dependency problems that are only visible when networking is disabled
2014-08-24 12:55:51 -06:00
Gregory Nutt
ec47914cf8
Convert existing board specific PHY interrupt interfaces to use newly defined standard interface
2014-08-16 08:35:31 -06:00
Gregory Nutt
3f4751796a
Updates to get the SAMA5D3 building again
2014-06-10 15:34:57 -06:00
Gregory Nutt
5070759021
Add board support for the SAMA5D4-EK
2014-06-06 12:37:36 -06:00
Gregory Nutt
5397e49665
Add support for the Olimex STM32 h405. From Martin Lederhilger
2014-06-03 10:34:36 -06:00
Gregory Nutt
6a8a62c0c1
STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent
2014-05-07 12:54:27 -06:00
Gregory Nutt
8634db8e30
Nucleo-F401RE: Use standard NuttX LED interfaces
2014-04-22 12:55:31 -06:00
Gregory Nutt
f2d25cadf0
Support for the Atmel SAM4S Xplaiend Board from Bob Doison
2014-04-21 17:34:05 -06:00
Gregory Nutt
d53c3a2090
Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett
2014-04-20 13:42:23 -06:00
Gregory Nutt
09fb2a1893
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
2014-03-28 15:20:26 -06:00
Gregory Nutt
a5bdccebe3
TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho
2014-03-18 11:21:31 -06:00
Gregory Nutt
99d2f3a993
SAM4E-EK: Add basic board support
2014-03-10 15:18:46 -06:00
Gregory Nutt
75bda40eb6
Add basic board support for the TM4C123G Launchpad
2014-03-10 11:25:06 -06:00
Gregory Nutt
17a96f6e1e
configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools
2014-03-06 09:17:11 -06:00
Gregory Nutt
c79bc5a19d
configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools
2014-03-03 15:40:18 -06:00
Gregory Nutt
317586c657
configs/pic32mx7mmb/nsh converted to use the kconfig-frontends tools
2014-03-01 12:00:56 -06:00
Gregory Nutt
bbe2b1c533
Documentation update
2014-02-18 16:19:14 -06:00
Gregory Nutt
fdccfe930b
Remove the unusable m68332evb configuration
2014-02-16 07:54:23 -06:00
Gregory Nutt
bd15ec2565
Add initial support for the Atmel SAMD20 Xplained Pro board
2014-02-12 17:50:58 -06:00
Gregory Nutt
73d340e0bd
Remove EFM32 from build system
2014-01-27 10:41:06 -06:00
Gregory Nutt
806b01deef
16z: Fix option bits; adjust system clock frequency
2014-01-23 12:06:57 -06:00
Gregory Nutt
90f0e4f6dc
configs/efm32-dk3650: Support for Energy Micro's development kit for the Leopard Gecko MCU. From Richard Cochran
2014-01-23 08:19:34 -06:00
Gregory Nutt
564fe7e232
configs/16z: Add support for 16z board
2014-01-22 11:50:37 -06:00
Gregory Nutt
94fb69459b
Some fixes for typos in recent changes to Kconfig files
2014-01-16 16:37:23 -06:00
Gregory Nutt
2382af1e7b
You can again specify the default board sub-directory when CONFIG_ARCH_BOARD_CUSTOM is used
2014-01-16 10:42:54 -06:00
Gregory Nutt
ebc3a64e35
Back out last change to configs/Kconfig. It has some bad side-effects
2014-01-16 10:13:20 -06:00
