sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
32,221 Commits 1 Branch 0 Tags 291 MiB
fa775661e7
Commit Graph

32221 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Gregory Nutt
10d99cc6e6 include/nuttx/wireless: Add a setbaud() method to the HCI UART lower half interface that can be used to change the default BAUD selection. arch/arm/src/stm32: Implement the setbaud() method for the STM32 HCI UART. 2018-04-25 13:09:08 -06:00
Gregory Nutt
cfc5f86862 net/udp: Minor update from review of 091e3f732e. In connect(), AF_UNSPEC is used to disconnect UDP socket. However, initial commit lacked logic to mark the socket as disconnected. 2018-04-25 10:13:59 -06:00
Gregory Nutt
091e3f732e net/udp: Fix several issues using connected UDP sockets: sendto() should not accept and address. Normally send() should be used instead. recvfrom() is no longer necessary. recvfrom() and poll() should not reset to accept any addresses but should, instead, only accept inputs and events from the connected remore peer. On of these issues was noted by 李桂丁 <liguiding@pinecone.net>. Changes were made as summarized here: http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch08lev1sec11.html 2018-04-25 08:43:38 -06:00
Gregory Nutt
31e3f208b2 tools/configure.sh: Fix last commit. If gmake is not present, then 'which gmake' spews a lot of annoying error messages when configuring. Best to pipe stderr to /dev/null so that we are blessedly unaware of the failures. 2018-04-25 08:28:49 -06:00
Goran Mekić
f6e087a05c Merged in mekanix/nuttx/feature/clang (pull request #632) 
Add clang support to stm32f746g-disco board

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-24 22:46:03 +00:00
Gregory Nutt
5fae6f8da6 Update README 2018-04-24 11:05:34 -06:00
Juha Niskanen
3cf830bd67 Merged in juniskane/nuttx_stm32l4/1wire_sht21_changes_pr (pull request #631) 
drivers/1wire: add PM hooks and unlink support to sht21 sensor (allowing hot-swappable I2C bus from 1-wire converter)

* drivers/1wire: add PM hook to 1wire bus

* drivers/1wire/ds28e17.c: i2c instance must be zeroed

* drivers/sht21: add unlink support

    Unlike most other unlink implementations in NuttX drivers, this one
    does not allow any I2C operations after unlink, making it possible to
    deallocate the I2C bus.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-24 13:21:02 +00:00
Ivan Ucherdzhiev
d24ce35e1c configs/imxrt1050-evk: Add procfs auto-mount support in imxrt_bringup.c. 2018-04-24 07:04:21 -06:00
Gregory Nutt
3012abdc45 configs/stm32f4discovery/hciuart: Disable MMC/SD support. That made it difficult to re-use the configuration without the base board. MMC/SD support is not needed in that configuration anyway. 2018-04-24 06:53:37 -06:00
Gregory Nutt
2d4e9c1eae arch/arm/sc/lpc16xx: Extends commit 456a258c23: Freeing endpoints should be set the same allocations as when endpoint was allocated. 2018-04-23 07:21:20 -06:00
Gregory Nutt
b555b302af Update README. 2018-04-22 11:32:39 -06:00
Michał Łyszczek
1c3b7a551b Makefile: Add support for nconfig frontend for 'make nconfig' 2018-04-22 11:32:08 -06:00
Gregory Nutt
0663e075ca Trivial typo fix 2018-04-22 08:39:18 -06:00
Gregory Nutt
f188b35707 Update some comments. 2018-04-22 07:36:39 -06:00
Gregory Nutt
505f460b6b configs: Review all implementations of board_lcd_initialize(). The NuttX convention is that all internal functions that return errors as an 'int' must return a negated errno value on failure and a non-negative value on success. Most were right but eight of them had cloned logic that returns 1 on success and zero on failure... both of which are interpreted as success by the caller since they are non-negative. 2018-04-21 18:03:01 -06:00
Alan Carvalho de Assis
1a879a3b52 configs/stm32f4discovery: Add MAX7219 support to STM32F4Discovery board 2018-04-21 17:41:01 -06:00
Gregory Nutt
f4cc435b3f Fix a couple of typos in a README file. 2018-04-21 12:30:14 -06:00
Gregory Nutt
524c0884a6 Update for new README.txt file. 2018-04-21 12:26:26 -06:00
Gregory Nutt
555c6112bc include/nuttx/wireless: Clean-up/improvement of some IOCTL definitions. 2018-04-21 09:44:35 -06:00
Gregory Nutt
5a8a9e3aec wireless/bluetooth: Adds implementation of GATT write IOCTL commands. 2018-04-21 08:55:58 -06:00
Gregory Nutt
87dd2dc16a wireless/bluetooth: Adds implementation of GATT read IOCTL commands. 2018-04-21 08:38:08 -06:00
Michael Jung
456a258c23 /arch/arm/src/lpc17xx: Fix USB device endpoint allocatin bookkeeping. 2018-04-21 06:39:14 -06:00
Michał Łyszczek
94b4a86aa6 fs/vfs: Fix negative errno set in fs_open.c 2018-04-20 17:05:42 -06:00
Jake Choy
459b9ec262 configs/imxrt1050-evk: Add logic to support user LED 2018-04-20 15:59:39 -06:00
Michał Łyszczek
8de51543a4 Fix a few compilation errors. 2018-04-20 15:55:16 -06:00
Michał Łyszczek
a1b80e12cf arch/arm/src/stm32: Enable DMA for SPI on stm32f30xxx MCUs. 2018-04-20 15:51:13 -06:00
Sergei Ustinov
940f41fb94 arch/arm/src/stm32: Correct typo in STM32 capture driver. 2018-04-20 09:22:16 -06:00
Gregory Nutt
8aa5b6c6ac include/nuttx/wireless: Add support for the rest of the IOCTL options needed to support apps/wireless/bluetooth/btsak. This is only the IOCTL command definitions. The IOCTL command implementation is still missing. 2018-04-20 09:14:59 -06:00
Gregory Nutt
901d20e64b arch/arm/src/nrf52: nrf52_wdt_initialize() should return a success/fail indication. 2018-04-20 09:13:37 -06:00
Alan Carvalho de Assis
677be2f437 configs/nrf52-pca10040: Add a configuration for testing the watchdog timer. 2018-04-20 07:47:19 -06:00
Pelle Windestam
303e6499bd net/tcp: Extended support for sending to non-blocking tcp sockets. 2018-04-20 07:37:51 -06:00
Alan Carvalho de Assis
161fb98b11 configs/nrf52-pca10040: Add support for starting the watchdog timer on the nRF52. 2018-04-20 07:23:57 -06:00
Levin Li
e4c48e0f23 arch/arm/src/nrf52: Add watchdog timer drivers. Includes significant updates from Alan Carvalho de Assis <acassis@gmail.com> 2018-04-20 07:13:22 -06:00
Gregory Nutt
fec79394f3 Some trivial, cosmetic changes from review of last PR. 2018-04-20 06:57:00 -06:00
Masayuki Ishikawa
b29e7a37b2 Merged in masayuki2009/nuttx.nuttx/network_bridge (pull request #630) 
drivers/net: Add TAP (network bridge) mode to tun.c

In previous implementation, TAP mode did not handle a packet
correctly. Also, the driver did not set the link layer type and
could not assign the interface name. This PR changes fix such
issues and supports TAP mode correctly.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-20 12:52:49 +00:00
Gregory Nutt
83ccdd0105 arch/arm/src/imxrt: Fix typo introduced in last commit. Noted by jakearcx@gmail.com. 2018-04-20 06:49:45 -06:00
Gregory Nutt
9b83737821 drivers/wireless/bluetooth: Partition bt_uart.c adding bt_uart.h and bt_uart_generic.c. This will now permit adding HCI UART drivers that have custom initialization requirements.. such as parts the need to download a configuration file to the HCI UART before they are usable. 2018-04-19 17:48:04 -06:00
Gregory Nutt
1d044e6952 Eliminate some warnings found in build-testing 2018-04-19 16:54:17 -06:00
Gregory Nutt
82aa7a486c configs/Kconfig: Fix some breakage inflicted on the Kconfig file by the i.MX RT merge. Fix some coding standard problems in hymini-stm32v board support. 2018-04-19 16:36:35 -06:00
Gregory Nutt
71b8d408e2 wireless/bluetooth: Add IOCTL commands to support MTU exchange. 2018-04-19 15:51:40 -06:00
Gregory Nutt
0a8dd2a778 wireless/bluetooth: Fix an attempt to use an uninitialized semaphore in the IOCTL logic. 2018-04-19 13:43:21 -06:00
Gregory Nutt
4eaa2b8306 wireless/bluetooth: IOCTL discover parameters need to persist throughout the discovery. 2018-04-19 11:57:15 -06:00
Gregory Nutt
2ebe8e99cc wireless/bluetooth: Add support for IOCTL commands to perform GATT discovery and obtain the results. 2018-04-19 11:26:36 -06:00
Gregory Nutt
f27124dfc4 include/nuttx/wireless: Remove bogus name from structure. This was left over from a previous change and had me confused for awhile. 2018-04-19 09:14:48 -06:00
Gregory Nutt
44a5a7e170 wireless/bluetooth: Remove Rx kernel thread. The operation of dispatching messages can be performed just as well on the high and low priority work queue. The network driver operates the low priority work queue so that also integrates better with network frame reception. 2018-04-19 08:52:09 -06:00
Dmitry Sharihin
a2363bd332 arch/arm/src/tiva: Allow building of Tiva platform with no serial console. 2018-04-19 06:11:15 -06:00
Anthony Merlino
7061d02f0f Merged in antmerlino/nuttx/xbee_timeout (pull request #629) 
Xbee: Adds a timeout to send logic to handle case where XBee module fails to respond to a Transmit request with a Transmit Status

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-19 04:08:13 +00:00
Daniel Agar
8a648e8fa9 Merged in dagar/nuttx/pr-stm32f777_typo (pull request #628) 
stm32f7 fix CONFIG_STM32F7_STM32F77X define typo

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-19 04:06:45 +00:00
Gregory Nutt
8ab2eb55d6 drivers/wireless: Add option to dump I/O buffers. Fix calculation of response length. 2018-04-18 12:46:47 -06:00
Gregory Nutt
50ca22ae78 Trivial, cosmetic update to last review. 2018-04-18 10:14:06 -06:00