Gregory Nutt
faa16d06ac
Break out a new internal interface, stm32_rtc_setdatetime(). This eliminates some un-necessary time conversions. From Freddie Chopin.
...
Add a skeleton implementation of the RTC lower half interface at arch/arm/src/stm32/stm32_rtc_lowerhalf.c. This is just the framework for the RTC lower half. None of the interface methods have yet been implemetned.
2015-02-13 12:56:58 -06:00
Gregory Nutt
5c75c8ad1d
Update ChangeLog
2015-02-13 11:49:20 -06:00
Gregory Nutt
fcadc2d8e4
Add an RTC upper half driver. This is the driver that is documented in include/nutt/rtc.h
2015-02-13 11:49:04 -06:00
Gregory Nutt
c463f9fad6
Move timer-related drivers from drivers/ to drivers/timers.
2015-02-13 10:30:06 -06:00
Gregory Nutt
ebfc797f9d
Update ChangeLog
2015-02-13 10:10:11 -06:00
Gregory Nutt
2ba67e7841
Removed all of the old, malformed RTC interface definitions from include/nuttx/rtc.h. The necessary prototypes have been removed, renamed, scattered to the wind, hidden under rocks, -- whatever it takes to make it clear that there is no RTC interface callable from application code.
2015-02-13 10:07:23 -06:00
Gregory Nutt
5fb51bf962
Forgot to add a file in the last commit
2015-02-13 10:05:10 -06:00
Gregory Nutt
3724a5e98e
RTC: Remove all backdoor interfaces from rtc.h
2015-02-13 08:41:34 -06:00
Gregory Nutt
d52482606e
Update ChangeLog
2015-02-13 06:22:35 -06:00
Gregory Nutt
d9f960e97b
Fix a problem in clock_systimer64 that occurs when (1) the 64-bit system time is enabled, and (2) the value of CONFIG_USEC_PER_TICK is less than 1 millisconds (such as when using the tickless mode of operation). In that case, the convertion of time to 64-bit millisecond value in clock_systmer64() causes some bad times to be returned. Time was converted to milliseconds, then to configured ticks. Precision was lost in the millisecond convertion.
...
The fix is to first convert time to a 64-bit microsecond value, then to the configured tick value.
Noted by David Sidrane.
2015-02-13 06:13:47 -06:00
Gregory Nutt
e7470e0834
Update dates in all skeleton files
2015-02-13 06:13:34 -06:00
Gregory Nutt
63ac1ec423
Cosmetic updates to comments
2015-02-12 13:44:22 -06:00
Gregory Nutt
3e1173225e
Renamed SPIDEV_GSENSOR to SPIDEV_ACCELEROMETER just because it looks better beside SPIDEV_BAROMETER
2015-02-12 12:26:19 -06:00
Gregory Nutt
38aa31dea2
Update ChangeLog
2015-02-12 12:21:05 -06:00
Gregory Nutt
fd6d299788
Add driver for the Feescale MPL115A baramoter. From Alan Carvalho de Assis
2015-02-12 12:18:43 -06:00
Gregory Nutt
eb84288521
Viewtool STM32F107: Add support for an optional, add-on Freescale MPL115A baramoter. From Alan Carvalho de Assis
2015-02-12 12:08:06 -06:00
Gregory Nutt
b6e399cc65
Update ChangeLog
2015-02-12 11:17:23 -06:00
Gregory Nutt
147042218b
gettimeofday() and settimeofday(): Move gittimeofdady() from sched/clock to libc/time. All remove gettimeofday() from NuttX system calls. It is only a wrapper around clock_settime() and does not need a trap. gettimeofday() is no longer tried as a core OS interface.
...
gettimeofday has been decremented in POSIX 2008. settimeofday() was never part of POSIX, but I decided to add it to libc as well just for symmetry.
2015-02-12 11:10:46 -06:00
Gregory Nutt
5e8cdece21
More updates to README files
2015-02-12 09:06:35 -06:00
Gregory Nutt
6044fc16a8
Updated README files
2015-02-12 07:29:11 -06:00
Gregory Nutt
f64ad4a3f2
Purely costmetic updates
2015-02-12 07:05:28 -06:00
Gregory Nutt
5144e9fa99
The TM4C1294 Launchpad has no on-board TMP100 temperature sensor
2015-02-12 06:49:11 -06:00
Gregory Nutt
2c61bda296
Refresh configurations
2015-02-12 06:48:18 -06:00
Gregory Nutt
e043ce1268
Update ChangeLog
2015-02-11 18:30:01 -06:00
Gregory Nutt
85f1eecc51
Review/update of the TM4C1294 Launchpad code
2015-02-11 18:27:38 -06:00
Gregory Nutt
7c61b61adf
Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6'
2015-02-11 18:07:03 -06:00
sauttefk
dc402d8d3e
Add TI EK-TM4C1294XL launchpad support
2015-02-12 00:30:38 +01:00
Gregory Nutt
fb796f6b9f
Prep for 7.8 release
2015-02-11 11:05:45 -06:00
Gregory Nutt
005643de2c
Networking: Fix a compilation error recently introduced into the raw packet logic
2015-02-11 09:30:30 -06:00
Gregory Nutt
1741b50111
Update Documentation
2015-02-11 07:26:26 -06:00
Gregory Nutt
0f7fafe43c
Update ChangeLog
2015-02-11 07:18:40 -06:00
Gregory Nutt
08913981bd
Add support for Freedom KL26Z board. From Derek B. NoonBurg
2015-02-11 07:18:06 -06:00
Gregory Nutt
bdb4893ced
Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg
2015-02-11 07:15:45 -06:00
Gregory Nutt
d379a67b8b
Update ChangeLog
2015-02-11 06:37:40 -06:00
Gregory Nutt
62aee62c3a
Some extensions to netinet/in.h adding some Linux compatible defintions. From Macs N.
2015-02-11 06:35:34 -06:00
Gregory Nutt
5bb723c2e1
LP17 Ethernet Driver: Fix some compile problems when IPv6 is enabled
2015-02-10 15:23:11 -06:00
Gregory Nutt
13d273a260
Update ChangeLog
2015-02-10 14:06:07 -06:00
Gregory Nutt
3859ee90f8
LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug.
2015-02-10 14:04:08 -06:00
Gregory Nutt
410fcaa0a1
Added a forward reference to struct inode to avoid warning about mismatching types in assignemnt
2015-02-10 13:41:49 -06:00
Gregory Nutt
9e2702fa52
Update ChangeLog
2015-02-10 11:13:59 -06:00
Gregory Nutt
601d99183b
SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.
...
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
2015-02-10 11:10:55 -06:00
Gregory Nutt
fa366e5ddb
Refresh configurations
2015-02-10 08:48:02 -06:00
Gregory Nutt
6583a331be
Update ChangeLog
2015-02-10 06:56:20 -06:00
Gregory Nutt
a82b8fd71f
Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled.
2015-02-10 06:54:10 -06:00
Gregory Nutt
a564872487
Refresh configuration
2015-02-10 06:28:41 -06:00
Gregory Nutt
cca957bdfb
Update changelog
2015-02-10 06:28:09 -06:00
Gregory Nutt
8a380a084d
IOB Configuration: Default number of IOB changes must be more than zero is UDP read-ahead is enabled.
2015-02-10 06:25:55 -06:00
Gregory Nutt
761d4bdbba
Fix some warning
2015-02-09 18:24:31 -06:00
Gregory Nutt
a38f79679b
Refresh Configuration
2015-02-09 18:24:11 -06:00
Gregory Nutt
828e922929
Update ChangeLog
2015-02-09 18:21:12 -06:00
