Gregory Nutt
|
fb25ba907c
|
SAMA5D4: Add partial support for secure interrupt controller (SAIC)
|
2014-06-20 15:22:00 -06:00 |
|
Gregory Nutt
|
083986e814
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
3a3af8a5dd
|
SAMA5D4-EK: Get ramtest clocking up to 528MHz
|
2014-06-20 11:37:06 -06:00 |
|
Gregory Nutt
|
a55457b175
|
SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED
|
2014-06-20 10:33:33 -06:00 |
|
Gregory Nutt
|
231fd1b5c8
|
SAMA5D4: Initial bring-up fixes
|
2014-06-19 14:16:36 -06:00 |
|
Gregory Nutt
|
acf42e2ce4
|
Costmetic update to comments/README file
|
2014-06-18 17:40:06 -06:00 |
|
Gregory Nutt
|
4f06b2c32d
|
SAMA5D4: Fix ISRAM base address: 0x00200000, not like the SAMA5D3 SRAM at 0x00300000
|
2014-06-18 13:03:10 -06:00 |
|
Gregory Nutt
|
9d78279173
|
Several other interrupt button implementations had the same problem as did the sam4s-xplained
|
2014-06-15 12:55:48 -06:00 |
|
Gregory Nutt
|
66f73fa67c
|
SAM4S Xplained (both): Button interrupts not being disabled after being detached
|
2014-06-15 12:43:33 -06:00 |
|
Gregory Nutt
|
67630a1112
|
SAMA5D4-EK: Add an SDRAM test configuration
|
2014-06-14 13:11:42 -06:00 |
|
Gregory Nutt
|
37d06c7444
|
SAMA5D4: Implement SDRAM initialization
|
2014-06-14 10:42:26 -06:00 |
|
Gregory Nutt
|
d80c55e8b6
|
SAMA5D4: Fix some memory remapping issues; updates to comments and README files
|
2014-06-14 08:02:58 -06:00 |
|
Gregory Nutt
|
7d7693acb3
|
Cosmetic update to comments
|
2014-06-11 14:57:14 -06:00 |
|
Gregory Nutt
|
d55865b97a
|
SAMA5D4: Add support for HSMCI1 power control pin
|
2014-06-11 14:55:51 -06:00 |
|
Gregory Nutt
|
2cf637692a
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
e0a07125c8
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
3f4751796a
|
Updates to get the SAMA5D3 building again
|
2014-06-10 15:34:57 -06:00 |
|
Gregory Nutt
|
1f64e9c5b9
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
92d6883a71
|
SAMA5D4: Completes PMC modifications for the SAMA5D4
|
2014-06-09 07:55:51 -06:00 |
|
Gregory Nutt
|
da8dfdcb6f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
18224d88b3
|
Update SAMA5D4-EK PIO usage
|
2014-06-07 09:37:17 -06:00 |
|
Gregory Nutt
|
87eacd6bf2
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
5070759021
|
Add board support for the SAMA5D4-EK
|
2014-06-06 12:37:36 -06:00 |
|
Gregory Nutt
|
50893fd36c
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
495b190e50
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
5397e49665
|
Add support for the Olimex STM32 h405. From Martin Lederhilger
|
2014-06-03 10:34:36 -06:00 |
|
Gregory Nutt
|
84dc8faccb
|
Update ChangeLog
|
2014-06-02 07:50:16 -06:00 |
|
Gregory Nutt
|
2191e27969
|
Update viewtools/nsh configuratin
|
2014-05-23 07:59:38 -06:00 |
|
Gregory Nutt
|
2abe0dd6dd
|
Change all variadic macros to C99 style
|
2014-05-22 09:01:51 -06:00 |
|
Gregory Nutt
|
1b39aff8b4
|
SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled
|
2014-05-15 11:41:58 -06:00 |
|
Gregory Nutt
|
83828d5fe3
|
Misc changes while testing the SAM4E-EK LCD (still does not work)
|
2014-05-14 15:31:38 -06:00 |
|
Gregory Nutt
|
de71f53351
|
SAM4E-EK: Ooops.. two touchscreen drivers(?)
|
2014-05-14 10:56:03 -06:00 |
|
Gregory Nutt
|
c50fc79798
|
SAM4E-EK: Add a touchscreen driver (untestd on initial checkin)
|
2014-05-13 11:28:38 -06:00 |
|
Gregory Nutt
|
c48bd737d0
|
SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)
|
2014-05-13 10:38:46 -06:00 |
|
Gregory Nutt
|
4e55571c21
|
SAM4E: PIO definition clean-up
|
2014-05-12 18:42:25 -06:00 |
|
Gregory Nutt
|
7aff487faa
|
Add ILI9325 register definition header file
|
2014-05-12 11:24:57 -06:00 |
|
Gregory Nutt
|
415500c6d9
|
Make sure apps/examples/pashello still builds; update comments; refresh configurations
|
2014-05-09 10:33:23 -06:00 |
|
Gregory Nutt
|
ed2e4a15dc
|
Create P-Code execution helper in apps/interpreters/prun; The P-Code binary format is functional except that there are still some modularity and kernel build issues that need to be addressed.
|
2014-05-09 08:52:11 -06:00 |
|
Gregory Nutt
|
7594d8b8cf
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:00:33 -06:00 |
|
Gregory Nutt
|
b6f264488a
|
BINFMT: A framework to support a P-code binary format (a work in progress)
|
2014-05-07 13:47:52 -06:00 |
|
Gregory Nutt
|
6a8a62c0c1
|
STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent
|
2014-05-07 12:54:27 -06:00 |
|
Gregory Nutt
|
fc6b3339a1
|
Nucleo-F401RE: Delay loop calibrated
|
2014-05-06 17:30:44 -06:00 |
|
Gregory Nutt
|
ade57e4cd8
|
Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working.
|
2014-05-06 11:07:10 -06:00 |
|
Gregory Nutt
|
22733f9a79
|
The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock
|
2014-05-06 10:01:02 -06:00 |
|
Gregory Nutt
|
88abca5e5e
|
STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented
|
2014-05-05 17:59:07 -06:00 |
|
Gregory Nutt
|
84d28641b7
|
SAM4S Xplained Pro: Clean-up of LED usage and also some integration of new timer features. From Bob Doiron
|
2014-05-05 14:38:29 -06:00 |
|
Gregory Nutt
|
dcc709e612
|
Updated Nucleo-F401RE configuration
|
2014-05-05 13:47:21 -06:00 |
|
Gregory Nutt
|
f924601fc1
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
ccb98abaaa
|
Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed
|
2014-04-30 16:12:36 -06:00 |
|
Gregory Nutt
|
79d9e9cccd
|
If the CPU load measurements are being driven by an external clock, then the prototype for sched_process_cpuload() must be available in include/nuttx/arch.h
|
2014-04-30 15:47:55 -06:00 |
|