The file descriptors of kernel threads should be clean and should
not be generated based on user threads. Instead, an idle thread
hould be chosen.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
reason:
If the type of tcb is TSTATE_TASK_ASSIGNED, removing it using nxsched_remove_not_running
and then putting it back into the queue may result in a context switch.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Since pthread_mutex is implemented by sem, it is impossible to see in ps who holds the lock and causes the wait.
Replace sem with mutex implementation to solve the above problems
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
reason:
Since smp call handler may lead to context switching,
we need to update the context information by calling up_cpu_paused_[save|restore].
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
reason:
dynaminc create g_irqmap to reduce the use of data segments
CONFIG_ARCH_NUSER_INTERRUPTS should be one more than the number of IRQs actually used
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Calling malloc in the critical section may cause thread switching.
Add a retry mechanism to handle the situation where other threads have been successfully expanded.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
enable the scheduler may cause the context to switch to a high-priority task,
which will failure to clear pending events correctly.
Signed-off-by: chao an <anchao@lixiang.com>
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1.work_queue a work which call work_queue again
2.work_cancel_sync the work
3.the work is just calling in workthread
4.work_queue the work again,and post the work_cancel_sync wakeup
5.the work is not canceled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_removeblocked.c", line 58: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = btcb->task_state;
"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_setpriority.c", line 243: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = tcb->task_state;
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
When a low-priority thread sends a kill signal to a high-priority thread,
the high-priority thread will exit and release tcb. When the thread returns
to the low-priority thread, it will access the released stcb.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
Regression by:
| commit 2ee8aa6f2b
| Author: hujun5 <hujun5@xiaomi.com>
| Date: Thu Jan 11 11:27:31 2024 +0800
|
| sched: we use spin_lock_irqsave replace enter_critical_section to protect g_irqvector
|
| enter_critical_section may be called before os initialized
|
| Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: chao an <anchao@lixiang.com>
Two things need to be done when vfork'ing:
- Must attach to parent's address environment (the addrenv is shared)
- Must allocate a kernel stack (where would the register context go otherwise)
Note that this code assumes the address environment is shared, since we
don't support fork() which would _clone_ the address environment instead.
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
* sched/Kconfig
(INIT_ENTRYPOINT): Document that the signature of "main" must take
"argc" and "argv" or else compilation error results, as discussed in
the email thread below [1].
References:
[1] dev@nuttx.apache.org email thread:
"basically, I get an error when I do make" started 18 Jul 2024,
archived:
https://lists.apache.org/thread/9j2s3647ysdhy204g4ombn4o09bn11c1
and elsewhere.
