Loopback device will consume the d_iob packet in upper layer protocol,
in order to avoid null pointer access, reprepare iob buffer before polling connections
Signed-off-by: chao an <anchao@xiaomi.com>
ubsan/ubsan.c: In function ‘get_signed_val’:
ubsan/ubsan.c:162:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
162 | uint64_t ret = (uint64_t)val & mask;
|
Signed-off-by: chao an <anchao@xiaomi.com>
In file included from sim/sim_netdriver.c:73:
sim/sim_netdriver.c: In function ‘netdriver_ifup’:
sim/sim_netdriver.c:284:32: error: ‘struct net_driver_s’ has no member named ‘d_ipaddr’; did you mean ‘d_ipv6addr’?
284 | sim_netdev_ifup(devidx, dev->d_ipaddr);
| ^~~~~~~~
sim/sim_internal.h:279:67: note: in definition of macro ‘sim_netdev_ifup’
279 | # define sim_netdev_ifup(idx,ifaddr) sim_tapdev_ifup(idx,ifaddr)
|
Signed-off-by: chao an <anchao@xiaomi.com>
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
"The number of characters written if successful or negative value if an error occurred.
If the resulting string gets truncated due to buf_size limit, function returns the total
number of characters (not including the terminating null-byte) which would have been written,
if the limit was not imposed." --- https://en.cppreference.com/w/c/io/vfprintf
Signed-off-by: jihandong <jihandong@xiaomi.com>
In some cases, deleting a folder will return unexpected results. For example, ENOENT should be returned when deleting a non-existent folder, but the result will return ENOTDIR.
Fix icmpv6_reply logic broken by commit 48311cc61f and 391b501639.
- 48311cc61f "Fix unaligned memory access when creating ICMP Port Unreachable messages"
- It removed `htonl` function outside `data`, then the byte order may be wrong, so add `htons` back.
- 391b501639 "net: extract l3 header build code into new functions"
- It mis-removed the `memmove`, and the icmpv6 has no payload copied after this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Set IPv4 flag before processing ipforward, otherwise the ICMP packet responded by ipforward may sometimes be regarded as IPv6.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The following changes omit the arm version:
| commit d321080351
| Author: chao an <anchao@xiaomi.com>
| Date: Fri Dec 2 02:52:18 2022 +0800
|
| arm/cortex-[a|r]: generating assemble code in ARM states by default
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
* enable DLFCN.
* bump WAMR to a version which i happened to test.
* enable bulk-memory because it's required by recent versions of
wasi-sdk, which i happened to use to build a test module.
(test.wasm in the log below.)
Lightly tested with a stripped down version of WAMR native-lib example. [1]
```
nsh> mount -t littlefs /dev/esp32flash /mnt
nsh> iwasm --native-lib=/mnt/test_add.o /mnt/test.wasm
Hello World!
10 + 20 = 30
nsh> iwasm /mnt/test.wasm
[00:00:23:000 - 6]: warning: failed to link import function (env, test_add)
Hello World!
Exception: failed to call unlinked import function (env, test_add)
nsh>
```
[1] https://github.com/bytecodealliance/wasm-micro-runtime/tree/main/samples/native-lib
1. rpmsgdev ioctl: should assgin back the client return value to
cookie->result, then this return value can be returned to the
application;
2. rpmsgdev seek: the type "off_t" may be 64bit, so modify the offset
in "struct rpmsgdev_lseek" to int64_t too;
3. rpmsgdev_seek: the rpmsgdev_seek in client should update the
filep->f_pos after the seek operation;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Fix build break on thumb2 mode:
opus/celt/arm/celt_pitch_xcorr_arm-gnu.S: Assembler messages:
opus/celt/arm/celt_pitch_xcorr_arm-gnu.S:146: Error: thumb conditional instruction should be in IT block -- `movle pc,lr'
Reference:
https://developer.arm.com/documentation/100067/0612/armclang-Command-line-Options/-mimplicit-it
In A32 code, the integrated assembler accepts all conditional instructions
without giving an error or warning. In T32 code, the integrated assembler
outputs an implicit IT block when there is a conditional instruction
without an enclosing IT block. The integrated assembler does not give an
error or warning about this.
Signed-off-by: chao an <anchao@xiaomi.com>
The option '-mthumb' is only valid for C source files and it is not passed to the assembler.
If 'thumb' is not considered in some assembly projects, the system will generate
'undefined instructions' when running incompatible instruction:
arm_undefinedinsn: Undefined instruction at 0x380cfc98
This assembly file should be compiled with .thumb but it doesn't:
380cfc90 <hobot_i8_i32_gemm_nn_m4_n8_neon>:
380cfc90: e92d4ff0 push {r4, r5, r6, r7, r8, r9, sl, fp, lr}
380cfc94: ed2d8b10 vpush {d8-d15}
380cfc98: e59d4064 ldr r4, [sp, #100] ; 0x64 <-- Undefined instruction
380cfc9c: e59d5068 ldr r5, [sp, #104] ; 0x68
380cfca0: e59d606c ldr r6, [sp, #108] ; 0x6c
380cfca4: e59d7070 ldr r7, [sp, #112] ; 0x70
380cfca8: e1a08120 lsr r8, r0, #2
380cfcac: e1a091a1 lsr r9, r1, #3
380cfcb0: e1a0a122 lsr sl, r2, #2
After enable thumb:
.syntax unified
.thumb
or
-Wa,-mthumb
.Lhobot_i8_i32_gemm_nn_m4_n8_neon:
38001100: e92d 4ff0 stmdb sp!, {r4, r5, r6, r7, r8, r9, sl, fp, lr}
38001104: ed2d 8b10 vpush {d8-d15}
38001108: 9c19 ldr r4, [sp, #100] ; 0x64
3800110a: 9d1a ldr r5, [sp, #104] ; 0x68
3800110c: 9e1b ldr r6, [sp, #108] ; 0x6c
3800110e: 9f1c ldr r7, [sp, #112] ; 0x70
38001110: ea4f 0890 mov.w r8, r0, lsr #2
38001114: ea4f 09d1 mov.w r9, r1, lsr #3
38001118: ea4f 0a92 mov.w sl, r2, lsr #2
This commit will enable the thumb option of the assembly file by default,
so that when compiling the assembly file, the machine code and the system will be in a consistent state.
----------------------------------------------------------------
https://gcc.gnu.org/onlinedocs/gcc-4.5.2/gcc/ARM-Options.html
GCC Manual:
-mthumb
Generate code for the Thumb instruction set. The default is to use the 32-bit ARM
instruction set. This option automatically enables either 16-bit Thumb-1 or mixed 16/32-bit
Thumb-2 instructions based on the -mcpu=name and -march=name options.
** This option is not passed to the assembler. **
** If you want to force assembler files to be interpreted as Thumb code,
either add a `.thumb' directive to the source or pass the -mthumb option
directly to the assembler by prefixing it with -Wa. **
Signed-off-by: chao an <anchao@xiaomi.com>
