sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
25,812 Commits 1 Branch 0 Tags 291 MiB
fc3540cffe
Commit Graph

9167 Commits

Author SHA1 Message Date
ziggurat29
05d2036334 complete logic in 'create stack' and 'use stack' to support stack coloration. Fix some booboos breaking compatibility with TLS in libc. 2016-05-25 10:37:38 -05:00
Aleksandr Vyhovanec
52c6cb1799 Fix typographical naming error in STM32 U[S]ART bit defintiions. 2016-05-25 09:04:03 -06:00
Aleksandr Vyhovanec
9a2002a302 1-wire driver based on U[S]ART in single-wire, half-duplex mode. 2016-05-25 08:59:47 -06:00
Frank Benkert
04223a9618 SAMV7: USBHS: Remove disabling of whole usb on suspend 
This fix removes the disabling of the whole USB peripheral on suspend
interrupt. Its enough to freeze the clock instead.

When disabling the whole peripheral, the next wakeup-interrupt comes
up with an disabled clocking. The unfreeze clock has no effect, because
the master clock is disabled. This makes all registers, including the
IDR unwriteable and the IRQ falls in an endless loop blocking the whole
system.

Furthermore the disabling of the peripheral clock prevents hotplugging
or reconnecting the USB.
 2016-05-25 07:20:48 -06:00
Gregory Nutt
317bf064a8 i.MX6: Clean up some initializers 2016-05-24 07:44:36 -06:00
Alexander Vasiljev
ad6f37edfa Adds definitions for the LPC4337jet100 chip. 2016-05-24 07:03:50 -06:00
Gregory Nutt
3a8ff78f87 Restore PR. I have no idea where it went. 2016-05-23 17:45:15 -06:00
Gregory Nutt
e929066042 Fix an error in the last commit 2016-05-23 17:11:36 -06:00
David Sidrane
c41e6d823a Add the up_systemreset interface to the samv7 arch. The approach is slightly different in that: 1) It enables ARCH_HAVE_RESET and allows the user to set if, and for how long, to drive External nRST signal. It also does not contain a default board_reset, as that really should be done in the config's src if CONFIG_BOARDCTL_RESET is defined. 2016-05-23 17:05:02 -06:00
David Sidrane
fca329945b This patch ensures that the TWIHS (i2c) hw get's its clock set when the sequence of 
sam_i2cbus_initialize
sam_i2cbus_uninitialize
sam_i2cbus_initialize

Or twi_reset is called.

I found this a while back in the stm32 family, so there may be more arch-es with this sort of bug. I suppose any driver that has the notion of "do not set the freq if it is already set" could be suspect.
 2016-05-23 13:38:34 -06:00
Alexander Vasiljev
b43fcd6f99 LPC43xx: Add AES support. 2016-05-23 08:03:32 -06:00
Gregory Nutt
80d0b2736e Reorder some logic: (1) set initial CPU IDLE task regsters AFTER allocating stack, (2) invalidate cache in CPU start-up BEFORE handling first interrupt. 2016-05-22 15:01:49 -06:00
Gregory Nutt
e47714322e Merged in K-man23/nuttx/stm32f411e-disco (pull request #25) 
Add basic configuration for stm32f411e-disco board with STM32F411VE chip
 2016-05-20 17:54:07 -06:00
Konstantin Berezenko
a2253cdd3e Add basic configuration for stm32f411e-disco board with STM32F411VE chip 2016-05-20 16:38:25 -07:00
Gregory Nutt
356692d70e SMP: Need to enable FPU on other CPUs as well 2016-05-20 13:35:58 -06:00
Gregory Nutt
07acd5327a SMP: Clean CPU0 D-Cache before starting new CPU; Invalidate D-Cache when new CPU started. 2016-05-20 12:39:02 -06:00
David Sidrane
916153fb75 Fix build if the config is not updated 2016-05-19 12:44:58 -10:00
Gregory Nutt
e27e87a957 Backing out part of last commit 2016-05-19 15:46:07 -06:00
David Sidrane
8fac871cc9 Adds a JTAG config and ERASE config to Kconfig to set the CCFG_SYSIO SYSIO Pins 
• SYSIO4: PB4 or TDI Assignment
0: TDI function selected.
1: PB4 function selected.
• SYSIO5: PB5 or TDO/TRACESWO Assignment
0: TDO/TRACESWO function selected.
1: PB5 function selected.
• SYSIO6: PB6 or TMS/SWDIO Assignment
0: TMS/SWDIO function selected.
1: PB6 function selected.
• SYSIO7: PB7 or TCK/SWCLK Assignment
0: TCK/SWCLK function selected.
1: PB7 function selected.
• SYSIO12: PB12 or ERASE Assignment
0: ERASE function selected.
1: PB12 function selected.

The thing I did not add is warning or compilation failure, (to save the next guy the hassle), at ALL the driver points that uses the these pins.

I did remove this

  /* To use the USART1 as an USART, the SYSIO Pin4 must be bound to PB4
   * instead of TDI
   */

  uint32_t sysioreg = getreg32(SAM_MATRIX_CCFG_SYSIO);
  sysioreg |= MATRIX_CCFG_SYSIO_SYSIO4;
  putreg32(sysioreg, SAM_MATRIX_CCFG_SYSIO);

in sam_lowputc.c in favor of an #error - because the default is an input TDI and driving it blindly to an output TXD1, would be a contention.
 2016-05-19 14:33:54 -06:00
Gregory Nutt
7f7d4e664c Completely trivial changes from review of last PR 2016-05-19 14:09:00 -06:00
Sebastien Lorquet
ef66f641e9 small fix left from stm32 2016-05-19 21:57:59 +02:00
Sebastien Lorquet
6642898ee4 Merge branch 'master' into can 2016-05-19 21:49:31 +02:00
Sebastien Lorquet
8aae953f67 CAN support for STM32L4 2016-05-19 19:13:04 +02:00
Gregory Nutt
c364faeefc SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface. 2016-05-18 19:47:48 -06:00
Gregory Nutt
5d574549bd stm32f103-minimum: Add schematic; remove unused watchdog driver logic 2016-05-18 15:37:42 -06:00
Gregory Nutt
f454b38d6e ARMv7-A SMP: Allow CONFIG_SMP_NCPUS=1 for testing purposes 2016-05-18 09:17:02 -06:00
Gregory Nutt
72de45b7cf Merged in david_s5/nuttx/upstream_to_greg (pull request #21) 
Fixed Break changes needed CONFIG_SERIAL_TERMIOS to build
 2016-05-17 18:09:23 -06:00
David Sidrane
f444f061d6 Fixed Break changes needed CONFIG_SERIAL_TERMIOS to build 2016-05-17 14:04:51 -10:00
Gregory Nutt
5fc619eb1b Changes from review of last PR 2016-05-17 17:39:27 -06:00
Gregory Nutt
4aeb06a79d Merged in david_s5/nuttx/upstream_to_greg (pull request #20) 
Upstream_to_greg
 2016-05-17 17:30:45 -06:00
David Sidrane
bef5552eba Support BSD compatible breaks on stm32fl4 U[S]ART 2016-05-17 13:09:34 -10:00
David Sidrane
3ffe7c378f Support BSD compatible breaks on stm32f7 U[S]ART 2016-05-17 13:09:34 -10:00
David Sidrane
b11f49e7f1 Support BSD compatible breaks on stm32 U[S]ART 2016-05-17 13:09:34 -10:00
David Sidrane
55d8b0e277 Use the correct register and bit to send an STM32 non-bsd compatible break 2016-05-17 07:55:33 -10:00
Gregory Nutt
fb484a581f All GCC final arch/*/src/Makefiles: Allow --start-group and --end-group to be redefined for the case where GCC is used to link (instead of LD). Suggested by Paul Alexander Patience. 2016-05-17 10:43:15 -06:00
Gregory Nutt
0fe64839db i.MX6: Fix comparison values in system timer setup. Clock was running 3x too fast. 2016-05-17 10:08:06 -06:00
Gregory Nutt
4c08492c0f i.MX6: Fix a bit setting in the timer configuration 2016-05-17 07:21:18 -06:00
Gregory Nutt
e6728bac29 Cortex-A9 GIC: Add an interface to set interrupt edge/level trigger 2016-05-16 14:42:55 -06:00
Gregory Nutt
4feeb0c2b4 Cortex-A9 GIC: Some fixes that I don't fully understand but do indeed give me serial interrupts 2016-05-16 12:50:35 -06:00
Gregory Nutt
a0cdbcb58f Update README 2016-05-16 08:44:18 -06:00
Gregory Nutt
a3f3cc12c0 Update some comments; Fix grammatic error in ChangeLog. 2016-05-13 17:36:08 -06:00
Gregory Nutt
faca2fb1e7 ARMv7-A/i.MX6: Add logic to handle allocation of CPU IDLE thread stacks more efficiently 2016-05-13 11:39:42 -06:00
Gregory Nutt
d14d84c1a6 ARMv7M/i.MX6: Implement CPUn n=1,2,3 startup logic 2016-05-13 09:11:55 -06:00
Gregory Nutt
e5388ad127 i.MX6: Need to set VBAR register for each CPU 2016-05-12 15:32:53 -06:00
Gregory Nutt
70782b0f14 ARMv7-A i.MX6: More SMP logic. Still untested. 2016-05-12 15:04:46 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
ba4ae6fdc4 Cosmetic fixes to last commit 2016-05-12 13:42:48 -06:00
David Sidrane
8a4e185c84 Kconfig edited online with Bitbucket 2016-05-12 18:50:43 +00:00
Gregory Nutt
7887b2d164 i.MX6: Add SRC register definition header file 2016-05-12 12:23:07 -06:00
Gregory Nutt
c00e3e55dc Fix several places in DMA logic where a spurious semicolon causes bad conditional logic 2016-05-11 17:42:59 -06:00
Gregory Nutt
f64f7407ba SAMDL DMAC: Fix several places in DMA logic where a spurious semicolon causes bad conditional logic 2016-05-11 17:30:04 -06:00
Gregory Nutt
f07ea1bb94 SAM (all): Fix several places in DMA logic where a spurious semicolon causes bad conditional logic 2016-05-11 17:26:59 -06:00
David Sidrane
8517a303a5 sam_xdmac.c edited online with Bitbucket 2016-05-11 23:13:24 +00:00
Gregory Nutt
f69b7d41db Merged in young-mu/nuttx/developing (pull request #15) 
Fix a bug of GPIO falling-edge interrupt for tiva
 2016-05-08 01:40:56 -06:00
Gregory Nutt
5c1c5079ea Cosmetic changes from review of last PR 2016-05-08 01:40:31 -06:00
Gregory Nutt
0143b3869a Merged in ziggurat29/nuttx/stm32l4_update_rtc_impl (pull request #14) 
Stm32l4_update_rtc_impl
 2016-05-08 01:24:09 -06:00
Young
863db15b56 Fix a bug of GPIO falling-edge interrupt for tiva 2016-05-08 13:54:51 +08:00
ziggurat29
48fc8b9dd7 problem with resetting backup domain clears clocking options set up before in *rcc.c 
use INITS flag to avoid magic reg value to detect power up reset state of rtc
correct a problem clearing interrupt flags (they weren't) which prevented an alarm from ever being used more than once per reset cycle
 2016-05-07 11:35:08 -05:00
Stefan Kolb
da1fc98a51 Fix a copy and paste error concerning the CAN driver. In the file sam_matrix.h the define SAM_MATRIX_CAN0_OFFSET is set to the wrong value. 
Error is only triggered if the global variable g_mcan0_msgram is located in RAM at an address beyond 0x20400000 + 0x0000ffff. In this case all send CAN messages have the length zero and the CAN-ID is zero as well.
 2016-05-06 04:02:28 -06:00
Gregory Nutt
050f544782 Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems. 2016-05-05 11:30:47 -06:00
ziggurat29
4e57c36a8c when setting an alarm, ensure that the respective alarm triggered flag is reset, because the alarms are edge-triggered interrupts 2016-05-05 11:47:58 -05:00
ziggurat29
0d659de226 fix nasty bug in ISR handler, where interrupt was not properly acknowleged (write to CR instead of ISR, as intended). Also, minor, set the LSI prescaler values more appropriately (though not critical since LSI is so low precision anyway). 2016-05-05 11:39:19 -05:00
ziggurat29
e0371de24d correct the RTC_ALRMR_ENABLE value, it needs to ignore the date/dow component since that is not set. Also, the prescaler value for HSE (which presumes 1 MHz, anyway) had transposed digits. 2016-05-05 11:28:41 -05:00
ziggurat29
67b1f89159 address thread safety in lower half driver with a driver mutex acquired/released in public api 2016-05-05 11:22:09 -05:00
ziggurat29
273680a6e9 update RTC implementation to include the various alarm related stuff recently added to STM32 arch 2016-05-05 11:16:00 -05:00
ziggurat29
dedcbeba2e add unique id function to arch, modded board to support unique id boardctl 2016-05-03 11:09:23 -05:00
Gregory Nutt
a95e426d35 Costmetic changes from last PR 2016-04-30 09:04:38 -06:00
ziggurat29
2fe0565437 added support for HSE and MSI clocks, and auto trim of MSI to LSE (needed for USB). 2016-04-29 22:13:32 -05:00
ziggurat29
31870b22f5 booboo in config sanity check; wasn't preventing insanity 2016-04-29 07:29:17 -05:00
ziggurat29
31e7f6fd00 add configuration options to allow SRAM2 to be used for heap, or not at all, and to zero-init it on OS start, or not at all. 2016-04-26 10:12:13 -05:00
ziggurat29
1218ee5f51 bug in binding peripheral to dma channel; inverted sense of a bitmask 2016-04-25 10:27:02 -05:00
ziggurat29
8d4dccb3b9 add DMA support to QSPI; tested. Updated Kconfig to more cleanly present the options and defaults. 2016-04-24 16:28:30 -05:00
ziggurat29
0f8dc3e7b4 fixed missing DMA peripheral selection and some header defines, updated various comments to be accurate 2016-04-24 16:23:47 -05:00
Gregory Nutt
aed10e0e49 Cosmetic changes from last PR 2016-04-23 12:51:46 -06:00
Gregory Nutt
0d3a0bf603 Merged in ziggurat29/nuttx/stm32l4_qspi_004 (pull request #5) 
add QSPI memory mapped mode support.  tested.  QSPI may enter and exit memory mapped mode; while in effect, other operations (e.g. command, memory) will fail with -EBUSY.
 2016-04-23 12:46:19 -06:00
ziggurat29
8c0c70ab12 add QSPI memory mapped mode support. tested. QSPI may enter and exit memory mapped mode; while in effect, other operations (e.g. command, memory) will fail with -EBUSY. 2016-04-23 11:54:03 -05:00
Marco Krahl
8b36a83df1 stm32: fix wrong FSCM pin mapping for stm32f42x 2016-04-22 07:27:00 -06:00
Gregory Nutt
2cb52786b6 STM32F7: Add dummy stm32_spi.h header file to workaround some compilation issues. Suggest by Martin Davey. 2016-04-20 06:49:21 -06:00
Gregory Nutt
4e04b3e931 Correct configuration of GPIO pin interrupts on Kinetis K60. Fromo mrechte. 2016-04-20 06:41:51 -06:00
Gregory Nutt
b8ee28cb57 lpc4357fet256_pinconfig.h has wrong ethernet pins configuration (slow slew rate, somewhere inbuffer should be used). From Vytautas Lukenskas 2016-04-20 06:37:26 -06:00
Frank Benkert
885cd812e6 SAME70: USBHS device workaround for errata; EP7 does not support DMA on some parts 2016-04-20 06:22:04 -06:00
Gregory Nutt
8bcb5f0251 Cosmetic changes from review of last PR 2016-04-19 07:11:18 -06:00
ziggurat29
ca6cb85456 QSPI interrupt driven mode is now implemented 2016-04-19 06:55:12 -05:00
Gregory Nutt
26ba3a2b96 Cosmetic changes from review of last PR 2016-04-18 06:50:45 -06:00
Gregory Nutt
c5cce5603e Merged in ziggurat29/nuttx/stm32l4_qspi_002 (pull request #2) 
basic support for QSPI in STM32L4; verified via 'examples/media'
 2016-04-18 06:30:28 -06:00
ziggurat29
499fea73ec basic support for QSPI in STM32L4; verified via 'examples/media' 2016-04-17 21:08:25 -05:00
Gregory Nutt
aa64214877 FB: Add a display number to the framebuffer planeinfo structure 2016-04-17 10:08:27 -06:00
Gregory Nutt
46846c0c24 Framebuffer driver: Add a display number to each interface in order to support multiple displays 2016-04-14 12:23:15 -06:00
Sebastien Lorquet
bef518095f Fix the STM32L4 SPI driver. That SPI driver is quite different. They now handle frames of arbitrary size between 4 and 16 bits. It was broken before a new bit has to be set (rx fifo threshold) to handle <= 8-bit transactions. If not set, the default is 16-bit packed >=8-bit frames and the RXNE bit is never set (it is set when 16-bits are received). weird things as always. 
This also add 8-bit access routines to the data register, because a 16-bit access to the data register when the frame size is below 9 bits is interpreted as a packed dual frame exchange.
 2016-04-13 17:21:49 -06:00
Gregory Nutt
99d981c3fc Kinetis SDHC: May work queue dependencies clearer 2016-04-12 09:07:25 -06:00
Stefan Kolb
fec1931def SAMv7 Kconfig: Correct range of SAMV7_PROGMEM_NSECTORS 2016-04-11 06:21:04 -06:00
Gregory Nutt
b3a177618f Oops: Forgot to add file in previous commit 2016-04-10 09:11:50 -06:00
Sergei Ustinov
8a5bf3c230 STM32 DAC output buffers correct enable. 2016-04-10 08:51:59 -06:00
Gregory Nutt
48106e605a Merge in arch/ submodule 2016-04-10 07:49:41 -06:00
Sebastien Lorquet
8f15af280a Sort DMA by function; Fix one misnamed definition. 2016-04-04 09:49:44 -06:00
Gregory Nutt
b4fc040783 RTC: Fix some compile issues when RTC_ALARM is disabled 2016-04-04 09:24:06 -06:00
Gregory Nutt
8a076d4c09 Eliminate a warning 2016-04-04 08:30:03 -06:00
Gregory Nutt
1e4674e535 STM32 RTC alarm: Use modifyreg32 for consistency 2016-04-04 08:28:01 -06:00
Gregory Nutt
1ea7b48677 RTC lower half was missing call to F4 alarm cancel function 2016-04-04 08:23:09 -06:00
Gregory Nutt
531b9f6626 STM32 RTC alarm: remove some if 0ed out logic. 2016-04-04 08:16:53 -06:00
Gregory Nutt
19aa5880e7 STM32 RTC Alarm: Add Neil's alarm cancellation logic 2016-04-04 08:15:48 -06:00
Gregory Nutt
65dc922a2e STM32 RTC: Fix compile errors for STM32 F1 2016-04-03 13:26:29 -06:00
Gregory Nutt
a573617f33 Costmetic renaming 2016-04-03 12:38:02 -06:00
Gregory Nutt
9f0df8180a STM32 RTC: Fix some errors when RTC debug is enabled 2016-04-03 09:52:08 -06:00
Gregory Nutt
6b3b12ee0a STM32 RTC: Move the logic to set a relative alarm from the low level RTC driver up higher into the RTC device driver lower half. 2016-04-03 09:22:02 -06:00
Gregory Nutt
e904d98915 STM32 RTC: Add implementation of logic to set the alarm relative to the current time 2016-04-02 18:17:46 -06:00
Gregory Nutt
a609880839 STM32 F4 RTC: Add support for setting alarm via driver 2016-04-02 17:38:19 -06:00
Gregory Nutt
d46156c2ba Merge branch 'master' of https://bitbucket.org/nuttx/arch 2016-04-02 14:48:59 -06:00
Gregory Nutt
0fccd81eff cosmetic update 2016-04-02 14:58:01 -06:00
Gregory Nutt
29f1c90b82 Eliminate a warning 2016-04-02 14:48:51 -06:00
Gregory Nutt
9bc38d19d9 RTC: Further simplications of the RTC driver interface; Add sample implementation of alarms for F1 2016-04-02 13:54:18 -06:00
Gregory Nutt
5fdefa1aad Minor cleanup of STM32 alarm stuff 2016-04-02 13:11:57 -06:00
Gregory Nutt
476301e5a4 STM32: Adapt the lower half RTC driver to the new, simplified interface 2016-04-02 12:58:47 -06:00
Neil Hancock
5ac54013d2 STM32 F4: Add a custom RTC driver 2016-04-02 10:46:10 -06:00
Aleksandr Vyhovanec
472115eda9 ARMv7-M: Add support for the IAR compiler 2016-04-02 08:14:09 -06:00
Gregory Nutt
bd2da2f543 ARMv7-M: Add toolchain option to select the IAR tools. Move ARMv7-M assembly language into a gnu/ subdirectory. Makefile selects iar/ or gnu/ directory based upon tool configuration 2016-04-02 07:53:52 -06:00
Aleksandr Vyhovanec
29ab0fb991 STM32: Add support for the IAR compiler 2016-04-02 06:58:55 -06:00
Frank Benkert
2234d7d8e5 SAMV7: USBHS: make the last patch also working for non-control-endpoints 2016-04-02 06:12:27 -06:00
Gregory Nutt
02978c797a i.MX6: Straighten up some glock gating 2016-04-01 14:52:17 -06:00
Gregory Nutt
84b399136e GIC: Level or edge sensitive interrupt? 2016-04-01 13:26:57 -06:00
Gregory Nutt
f698f3dcbe ARMv7-A GIC: Fix another initialization errors 2016-04-01 08:53:43 -06:00
Gregory Nutt
ddc1b88027 ARMv7-A GIC: Fix some initialization errors 2016-04-01 08:40:51 -06:00
Gregory Nutt
855c9a5225 ARMv7-A GIC: Move debug logic to a separate file; fix some errors in debug logic. 2016-04-01 06:58:49 -06:00
Gregory Nutt
37cacc6178 ARMv7 GIC: Fix some formatting errors in GIC debug output 2016-03-31 18:26:15 -06:00
Gregory Nutt
70683d08bc i.MX6: Add GIC debug output 2016-03-31 17:25:04 -06:00
Frank Benkert
d1065e876f SAMV7: USBHS: Reset the TXIN bit not before new data was written or all requests are completed. 2016-03-31 14:20:36 -06:00
Sebastien Lorquet
6d96f24d98 Enable RNG interrupts only when needed. 2016-03-31 13:43:00 -06:00
Gregory Nutt
29cae97367 i.MX6: Fix several problems with peripheral pin configuration 2016-03-31 13:36:06 -06:00
Gregory Nutt
9a9566faba i.MX6 Add more debug instrumentation; Fix setting of CCM register. 2016-03-31 10:49:35 -06:00
Gregory Nutt
756e6050e4 ARMv7-A: Need to set bits in the ICDDCR to enable forwarding of interrupts 2016-03-31 09:18:55 -06:00
Gregory Nutt
12064b276a ARMv7-A: Fix an error in GIC initialization 2016-03-31 08:05:12 -06:00
Gregory Nutt
9b81319fb1 i.MX6: OCRAM should be cacheable 2016-03-31 07:25:30 -06:00
Gregory Nutt
eb6fbc3059 Trivial changes from review of last PR 2016-03-30 14:44:29 -06:00
Gregory Nutt
8b1bcecbb1 Merged in ziggurat29/arch/stm32l4_rtc_001 (pull request #61) 
Stm32l4_rtc_001
 2016-03-30 14:32:47 -06:00
ziggurat29
624e6c1ebe correct #define errors in the 'debug output' and 'alarms' options code paths 2016-03-30 15:25:43 -05:00
Gregory Nutt
05fe9cb393 i.MX6: Fix UART baud rate calculation 2016-03-30 13:54:56 -06:00
ziggurat29
600a9b6981 basic RTC functionality implemented 2016-03-30 14:46:36 -05:00
Gregory Nutt
84f2fcfa80 i.MX6: Fix a few UART and GPIO initialization problems. 2016-03-30 12:31:49 -06:00
Gregory Nutt
8df80e6615 Kconfigs: All RNG selections also must select ARCH_HAVE_RNG 2016-03-30 07:56:03 -06:00
Gregory Nutt
6e000dc4fa i.MX6: Need to mapping OCRAM before enabling MMU because the page table lies in OCRAM 2016-03-29 17:51:58 -06:00
Gregory Nutt
426a6dae74 i.MX6: Fix missing DRAM mapping 2016-03-29 17:16:46 -06:00
Gregory Nutt
679a26cdf8 Update some comments 2016-03-29 15:35:47 -06:00
Gregory Nutt
1c56b8dd87 Update some ARM registers for Cortex-A9 2016-03-29 11:47:35 -06:00
Michael Spahlinger
940075f629 SAMV71/SAME70: Error in UART1 Pinmapping corrected 2016-03-29 07:25:37 -06:00
Dave
f9c2f70b36 STM32L4 PWR: Fix reversed parameters in putreg32() 2016-03-29 07:19:00 -06:00
Sebastien Lorquet
8fdef878ba Minor optimization to PR #60 2016-03-29 07:13:24 -06:00
Gregory Nutt
446618a644 Misc. trivial changes from review of last PR 2016-03-27 13:15:49 -06:00
Gregory Nutt
2a54bf91e5 Merged in ziggurat29/arch/stm32l4_lse (pull request #60) 
Stm32l4_lse support
 2016-03-27 13:06:55 -06:00
Gregory Nutt
267e20c729 PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains. 2016-03-27 13:01:32 -06:00
Gregory Nutt
32acc35c88 PM: Add activity domain to all PM callbacks 2016-03-27 11:18:54 -06:00