Summary:
Keeping this option out of depend on any common serial.
Using the option, need to implement xxx_lowputc.S/c.
You can also logging the booting message through rewriting
fake arm64_lowputc with other debug method (eg semihosting,
ARM debug channel etc).
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Adds support for the ES8311 codec on the ESP32-S2-Kaluga-1 board. This commit also adds basic configurations for testing and updates the board documentation.
Run:
$ ./tools/refresh.sh --silent --defaults all
It will report that CONFIG_START_DATE and/or CONFIG_START_MONTH
are using invalid value starting with 0, so 03 should be 3, and so
on.
While using NVS-like storage of the Wi-Fi driver, an error was
thrown while trying to access a file whose name was longer than
the mounted SPIFFS `CONFIG_SPIFFS_NAME_MAX`.
RTP Tools is a set of small applications that can be used for
processing RTP data. This application is able to receive RTP
packets and write the content to a FIFO. `nxplayer` then reads
from the FIFO, enabling using NuttX as a RTP receiver for audio
applications.
This is particularly useful to stream uncompressed audio through
Wi-Fi to remote speakers.
RTP Tools is a set of small applications that can be used for
processing RTP data. This `defconfig` builds the `rtpdump` and
is able to receive RTP packets and print the contents.
The defconfigs that test PSRAM on ESP32 contain the `ramtest` app,
but it doesn't test the memory correctly as it try to access the
memory directly. The memory, however, is being used by the system's
heap and `ramtest` can mess with it. Therefore, it makes sense to
test using `mm` testing app.
I noticed sometimes once config changed, it will not launch to shell,
maybe due to
K210 is a 64-bit platform and without misaligned memory access support.
This patch may fix this problem, it will not introduce new issues at least.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Add private data for spi_bitbang low-level driver to add an instance
specific private data.
And add spi_destroy_bitbang() to clean up a driver instance.
- Fix DMA addressing issues within litex_sendsetup/litex_recvsetup
- Extend with handling specific to eMMC commands during init & use.
- Cleanup of 4-bit BUS handling for SD and eMMC
- For eMMC, Send CMD0 during init as per JEDEC v4.41 for pre-idle
Summary:
- This commit adds sabre-6quad:netnsh_ar8031 configuration
Impact:
- None
Testing:
- Tested with ping, telnet, iperf
- Note that iperf in TCP mode still has a performance issue.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* Bind smartfs0 to LUN 0 instead of mmcsd0
* Use USB composite code from similar boards
* Pull in CDC/ACM code as well
boards/stm32f411-minimum: composite: style refactor
* Unalign `int strbase = ` text, use single spaces
* Rename `int n` to `int dev_idx` like in newer `_composite.c` board code
* Add composite defconfig with CDC/ACM and MSC for build-testing
* OTG_FS_VBUS, OTG_FS_ID conflict with USART1. These are not
connected to USB-C in any WeAct Studio MiniF4 board revisions.
* PC9 PWRON & PD5 OVER do not exist on UFQFPN48.
