Commit Graph

1145 Commits

Author SHA1 Message Date
Gregory Nutt
67f0563fad Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread. 2015-02-09 08:33:29 -06:00
Gregory Nutt
b2ed249b42 STM32 SPI: Clean-up asymmetric configuration of SPI6 2015-02-07 18:59:06 -06:00
Gregory Nutt
706f01b8a2 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
ee8d792737 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
821ffc0b8a STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
506c6c8512 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
1646e643d7 Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
f036df9faa Minor update to Kconfig file selections 2015-02-04 08:21:32 -06:00
Gregory Nutt
011c6e0c7e Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox. 2015-02-04 07:24:19 -06:00
Gregory Nutt
2393a074e5 STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
Gregory Nutt
523b12c624 Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna. 2015-01-27 09:20:42 -06:00
Gregory Nutt
2ce16c8fda Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna. 2015-01-27 09:15:43 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
b3db229b77 STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver 2015-01-21 15:04:39 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
3aafa0b93d nuttx/arch/arm/src/stm32/stm32_serial.c: fix declaration and definition of up_receive() and up_dma_receive() to match fields of uart_ops_s from nuttx/include/nuttx/serial/serial.h 2015-01-19 06:42:27 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input()
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
1193b4aa55 STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE 2015-01-08 17:47:34 -06:00
Gregory Nutt
1ace391fcf MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.

This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.

From David Sidrane
2015-01-08 06:23:42 -06:00
Gregory Nutt
a97d304d1a STM32 RTC: Add Kconfig options needed with the preceding commit 2015-01-02 06:45:45 -06:00
Gregory Nutt
7b89f64b37 stm32-rtc: Add support for the internal low speed clock (LSI)
Some boards do not have the external 32khz oscillator installed, for those boards we must fallback to the crummy to the crummy internal RC clock.  Turn on by defining CONFIG_RTC_LSICLOCK.

From Kevin Hester <kevinh@geeksville.com> via Lorenz Meier.
2015-01-02 06:32:40 -06:00
Gregory Nutt
a0727124c2 stm32: update description and code documentation. Also fixes a few code formattings.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:59:46 -06:00
Gregory Nutt
1a27614552 stm32: fix wait upon vertical blank. This should never have occurred before.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:48:25 -06:00
Gregory Nutt
171c017a0c stm32: fix faulty access to non existing layer. This disables operation that requires double layer support, when configured for single layer only.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:45:30 -06:00
Gregory Nutt
59c6f42be4 STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
d597e94332 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
405d72c1ad Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
214183ff93 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
570943bd71 STM32 I2C: Add strings to decode trace events. From David Sidrane 2014-12-26 08:35:21 -06:00
Gregory Nutt
831167f806 Add support for run time stack checking for the STM32. From David Sidrane 2014-12-26 08:30:42 -06:00
Gregory Nutt
16a302e732 STM32 LTDC: Move ltdc.h from include/nuttx/video to arch/arm/include/stm32; Trivial updates after general review 2014-12-19 14:52:17 -06:00
Gregory Nutt
44d72c6545 stm32: Add configuration option for ltdc
This adds the following ltdc configuration options:
- dither support
- cmap support, is this the right place for CONFIG_FB_CMAP?
- support for extended ltdc interface

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:58:39 -06:00
Gregory Nutt
193edfb7be stm32: implements ltdc frambuffer and support for ltdc layer operation
This implements the framebuffer support for the generic nuttx framebuffer
interface, (see nuttx/video/fb.h)

This also implements the interface to perform hardware accelerated layer
operation by the ltdc controller and dma2d controller later (see
nuttx/video/ltdc.h).

The following methods are supported by the ltdc interface:

- getvideoinfo
  Get video information of the layer

- getplaneinfo
  Get plane information of the layer

- getlid
  Handle specific layer identifier. This allows to detect to current layer
  state (e.g. important for layer flipping)

- setclut
  Set the layer color lookup table. Up to 256 color entries supported.

- getclut
  Get the layer color lookup table

- setcolor
  Set the default layer color. In the context of the ltdc layer this means set
  the default color outside the active area or if the layer is disabled.

- getcolor
  Get the default layer color

- setcolorkey
  Set the layer colorkey (chromakey). Colorkey is enabled by blendmode
  LTDC_BLEND_COLORKEY

- getcolorkey
  Get the layer colorkey

- setalpha
  Set the constant alpha value. If blend mode LTDC_BLEND_SRCPIXELALPHA or
  LTDC_BLEND_DESTPIXELALPHA is defined than the blended color is calculated
  by the formel:
    Cdest = Pixelalpha * Constalpha * Csrc.
  Otherwise:
    Cest = Constalpha * Csrc

- getalpha
  get the alpha value

- setblendmode
  Set the layer blendmode.
  Supported blendmodes:
    non blendmode (do not perform blend operation independent on the layers
                   alpha and colorkey)
    alpha          alpha blending (transparency)
    destpixelalpha use pixel alpha value for the top layer (Layer2)
    srcpixelalpha  use pixel alpha value for the subjacent layer (Layer1)
    colorkey       enable colorkey

- getblendmode
  Get the layer blendmode

- setarea
  Set the active layer area, the visible rectangle inside the whole layer.
  This also allows to change the position of the whole layer which is visible in
  the selected area independent on the area position.

- getarea
  Get the active layer area

- update
  Reload the layer shadow register and make changes visible. Also supports
  layer flipping.

Note! Dithering and background color are static parameter and can only changed
at build time.

Implementation details:

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings are shadowed before they become active (except setclut).
They are still inactive until the layer is updated. This is done by the update
method. Should clut only active after an update or not? Clut is used for drawing
while the other settings usually used for blend or blit operations. So i think
this should be the right way.

The implementation of ltdc interface was inspired by SDL and DirectFB.
All layer settings shadowed before they become active (except clut).
They are still inactive until the layer is updated. This is done by the update
call. Should clut only activated after an update or not? Clut is used for draw
operation while the other settings usually used for blend or blit operations.
So i think this should be the right way.

Deviations from the ltdc hardware implementation:

- Shadow register update of both layer (Layer1 or Layer2) is independent as long
  LTDC_UPDATE_SIM is not set. This flag allows to update both layer simultaneous.
  Otherwise only the desired layer is updated.

Layer operation:

Keep in mind, both layer are allways active (of course if both enabled by the
configuration). First the Layer 1 is blended with the background color and the
result is blended with the Layer2. To avoid blend effects, set the Layer2 in non
blend mode. This is equal to blend with alpha = 255. Enable blending of Layer2
with the background color by enable blending of Layer1 and disable the opacity
by setting the alpha value to 0.

Layer flip:

A layer flip usual mean swapping two framebuffer. So the current inactive buffer
can refreshed with data while the active framebuffer is visible. A flip
operation changes the inactive layer to the active one and vice versa.

The ltdc implementation supports layer flip. This can be done by the update call
and the flag LTDC_UPDATE_FLIP. In this case ltdc makes the inactive layer
invisible. In detail, the inactive layer is disabled and the blendmode reset.
Detection of the current layer state (e.g. active or inactive) is supported
by the getlid method combined with one of the LTDC_LAYER_* flags.
Maybe an additional method "flip" for flip operation should be added to the ltdc
interface? But this make no sence from my view if the layer is a non LTDC layer,
e.g. playing with dma2d only.

Supported and tested nuttx pixel formats:

Single Layer without LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Single Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Dual Layer with LTDC interface support:
- FB_FMT_RGB8 (cmap support required)
- FB_FMT_RGB16_565
- FB_FMT_RGB24

Why is FB_FMT_ARGB8888 missing?

Changes:
- Remove unused register debug method.

Todo:
- Add support for backlight, currently not neccessary

Did i forgot something? Take a look in the ltdc example or the interface
description (see nuttx/include/video/ltdc.h).

Thanks to Ken for the base layout. ;)

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:48:53 -06:00
Gregory Nutt
83d87e5ef7 stm32: Add infrastructure for dma2d support
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:41:08 -06:00
Gregory Nutt
060a61dfac stm32: Add common stm32 layer description. This defines a common layer description for the ltdc and dma2d controller.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:37:08 -06:00
Gregory Nutt
df31cf1db8 stm32: configure PLLSAI clock to enable ltdc register access
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:30:58 -06:00
Gregory Nutt
3385fe60cf stm32: Add missing clut register definition
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:28:42 -06:00
Gregory Nutt
e9074c8a44 stm32: rename CFBLR register name to the name used in the reference manual
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:26:04 -06:00
Gregory Nutt
f181dcef29 stm32: rename PLLSAI register name to this one in the reference manual
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-19 13:21:39 -06:00
Gregory Nutt
f284c5cab2 Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
a574a3cc8a STM32 LTDC: Fix a typo in conditional compilation 2014-12-13 07:45:42 -06:00
Gregory Nutt
f8592281a7 STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit 2014-12-13 07:44:13 -06:00
Gregory Nutt
dd3d417aed STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit 2014-12-12 07:43:32 -06:00
Gregory Nutt
cb9e3c2bb9 Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation. 2014-12-08 09:51:52 -06:00
Gregory Nutt
6d7106424e STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna 2014-12-02 10:19:37 -06:00
Gregory Nutt
13de352dcd STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna 2014-12-02 10:18:02 -06:00
Gregory Nutt
f94052de26 Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
eace825e3b STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository. 2014-11-29 13:37:45 -06:00
Gregory Nutt
0d50608eae Fix one warning. There are a couple of others that look like real problems 2014-11-28 11:49:24 -06:00
Gregory Nutt
3d55cd82ee Forgot too add file before last commit 2014-11-27 06:14:09 -06:00
Gregory Nutt
0ad88d9664 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
727a7c9e40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
184ebdf191 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
e69e2767ad Correct a typo in the STM32 OTGFS register bit definitions 2014-11-13 10:43:54 -06:00
Gregory Nutt
dc16ffe11a Fix a typo in an I2C header file. From Jahu Niskanen 2014-11-11 07:12:16 -06:00
Gregory Nutt
c65372b80c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
5ebc472f43 STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition 2014-10-28 06:58:37 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
800826ac64 Add framework for EFM32 DMA support -- no logic in place yet 2014-10-24 17:59:13 -06:00
Gregory Nutt
2763da5ddd EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
94270a0229 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
d2cf8395f9 stm32: rename spi frame format definition
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-10-20 15:12:59 -06:00
Gregory Nutt
0aea891272 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
26b42e3f57 Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
e73b64f5ea Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
7012d13e95 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
85c75a39b0 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
abc90f0e50 Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
1b1daeb7ef Correct STM32 RTC EXTI bit definition. From Lazlo 2014-10-09 06:25:07 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
6ab29cbef9 Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
6023219078 Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton 2014-10-07 15:05:30 -06:00
Gregory Nutt
362736b377 Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton 2014-10-07 15:01:42 -06:00
Gregory Nutt
7e9c8b5926 STM32 CAN correction suggested by Max Holtzberg 2014-09-24 08:23:05 -06:00
Gregory Nutt
238e18cc0a Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
1ca6adadfa More naming changes to get the stm3240g-eval/nxterm configuration building again 2014-09-20 15:53:28 -06:00
Gregory Nutt
52a1f19023 Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
442d2adb7a Fix for UART7 and UART8 on STM32 clock enable from Aton 2014-09-11 10:27:40 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
10aa9ad087 Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
729bc9f9a7 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
9be4972862 STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
Gregory Nutt
01566dd322 STM32 serial: MAke uart_devs[] const. From Freddie Chopin 2014-08-22 16:20:52 -06:00
Gregory Nutt
52b3735310 Recent STM32 UART change: Wasn't that logic backward? Shouldn't that have been disable the USART if (1) we don't have than many USARTs OR (2) we don't have that particular USART -- not AND. 2014-08-22 16:16:23 -06:00
Gregory Nutt
033de28cfa STM32 F401: Correct support for USART6 on this chip. From Freddie Chopin 2014-08-22 06:49:16 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
754541a381 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
2fab4eaa5a In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
4c90c03028 Use the device name assigned by the registration process, not our best guess 2014-08-16 15:14:39 -06:00
Gregory Nutt
8f6f564971 More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic 2014-08-16 15:04:09 -06:00
Gregory Nutt
85070e057e Modified to support the change to the network ioctl signature changes. Also add support for new ioctl to setup PHY event notifications. 2014-08-16 14:08:58 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d57c3b4e82 Update ChangeLog 2014-07-22 07:25:01 -06:00
Gregory Nutt
45c03e5a1a STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen 2014-07-22 07:23:17 -06:00
Gregory Nutt
615b7d6c7a Fix typos in the STM32 DAC header file. From Petteri Aimonen 2014-07-22 07:13:33 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
68f83f973e CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
954048b8e9 Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
3010eddf11 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
ed02593af7 STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
48e6f0ba78 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
bfff6190d0 Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
a095b1b260 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
f8e5e82402 Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo 2014-06-27 09:30:41 -06:00
Gregory Nutt
fd7b06c68e STM32 I2C reset. Add missing GPIO configuration. From Alex D 2014-06-25 16:08:31 -06:00
Gregory Nutt
ff97ad1245 Clean-up packet socket naming 2014-06-25 10:34:52 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
a2cb59cab8 First check-in of Lazlo's PF_PACKET 'raw' socket implementation 2014-06-12 11:52:06 -06:00
Gregory Nutt
a23245781a STM32: Handle setting of USART CR1_M when 8 bits of data plus parity 2014-06-11 15:49:54 -06:00
Gregory Nutt
348e666278 STM32: Expicitly include header file files. From Freddie Chopin 2014-06-10 15:49:48 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
b3abd30a76 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
3feabec7d5 STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer. 2014-05-27 07:10:53 -06:00
Gregory Nutt
c68f9477cf Back out PX4 fixes that were reverted in PX4 repository 2014-05-25 07:53:00 -06:00
Gregory Nutt
5d3479bbec STM32 I2C: Final fixes from Max Kriegleder et al. 2014-05-23 08:42:14 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
d2e1d8f6ee STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen 2014-05-20 08:12:07 -06:00
Gregory Nutt
947f31f5a9 SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
5258e8d9e7 Fix one error that I made in the last check-in (there are probably more) 2014-05-14 08:09:08 -06:00
Gregory Nutt
fb774d677c Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
5d35f07278 STM32 I2C: Cosmetic changes in preparation to merge a change 2014-05-13 13:11:10 -06:00
Gregory Nutt
d9a20861a6 Updated README and comments 2014-05-10 11:36:20 -06:00
Gregory Nutt
fa7c79712e STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge 2014-05-10 10:34:05 -06:00
Gregory Nutt
308d0dbe06 Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit 2014-05-09 06:41:01 -06:00
Gregory Nutt
02bb1d69b8 Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
1cc859405e STM32: Rename pinmap.h files to better reflect the chip naming conventions 2014-05-07 13:05:12 -06:00
Gregory Nutt
6e9df4d5ab STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
a1871c7045 STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 11:35:13 -06:00
Gregory Nutt
ca31e38f7b Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
acd40e73aa The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
bfa9df89e2 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
27d3a4962a STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
449ad68fa1 Correct some typos in STM32 RCC header files noted by Ramtin Amin 2014-05-05 07:23:26 -06:00
Gregory Nutt
42432ab1d0 STM32 F401 has no CCM memory 2014-04-30 16:49:39 -06:00
Gregory Nutt
d7b261eb46 Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed 2014-04-30 16:12:36 -06:00
Gregory Nutt
8be212ccc3 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
de7136e69b STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26 2014-04-28 07:07:47 -06:00
Gregory Nutt
1745e978fb Sourceforge ticket #26: STM32 up_prioritize_irq should not be called if CONFIG_ARCH_IRQPRIO is not defined 2014-04-25 16:23:00 -06:00
Gregory Nutt
0bf091f2a0 STM32 dmapreflight method must be conditioned on CONFIG_SDIO_PREFLIGHT. From Pelle Windestam 2014-04-25 07:22:14 -06:00
Gregory Nutt
9bd0102aae Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
162662a290 Add support for the STM32F041RE and for the Nucleo-F401RE board. From Frank Bennett 2014-04-20 13:42:23 -06:00
Gregory Nutt
235de5c573 ST32: Make selection of SDIO interrupt priority essentially impossible 2014-04-19 08:05:49 -06:00
Gregory Nutt
a61c58d50a STM32 OTGFS Host: If OTGFS_HCCHAR_ODDFRM is not goint to be set, then it should be cleared 2014-04-17 11:16:58 -06:00
Gregory Nutt
6492446ac8 STM32 OTGFS Host: Changes from Leo for low-speed devices and interrupt endpoints 2014-04-17 10:52:27 -06:00
Gregory Nutt
edc022ff1a Costmetic: Replace spaces with tabs 2014-04-16 16:26:46 -06:00
Gregory Nutt
cb802b02e1 STM32 OTGFS Host: Additional trace points from Leo 2014-04-16 12:56:21 -06:00
Gregory Nutt
b4f11306d3 STM32 F2: Fix SPI2 MOSI pin mapping. From dlsitzer 2014-04-16 12:35:33 -06:00
Gregory Nutt
e26466e6e4 Updates to the STM32 OTGFS host logic from Leo 2014-04-15 08:49:33 -06:00
Gregory Nutt
d4fc5ec41c examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function 2014-04-14 12:26:49 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
eee82879cb Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
65c6c071ff STM32 OTF FS host: Use of OTGFX_VTRACEn_ macros must match use of usbhost_tracen() interface 2014-04-12 10:09:37 -06:00
Gregory Nutt
bc144ad5d0 STM32 OTG FS Hose and others: Remove some warnings 2014-04-12 09:58:23 -06:00
Gregory Nutt
7bf7d8ebf6 STM32 OTGFS Host: Fix a logic error introduced in the last check-in 2014-04-12 09:33:52 -06:00
Gregory Nutt
aefb741a6a STM32 OTGFS: Host USB tracing instrumentation added by Leo 2014-04-12 08:44:22 -06:00
Gregory Nutt
eddfa4222f STM32 EMAC: Add support for IGMP hash table update. From Manuel Stühn 2014-03-24 09:32:48 -06:00
Gregory Nutt
c99476c950 configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools 2014-03-04 08:58:01 -06:00
Gregory Nutt
c8757cb0e6 STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane 2014-02-18 13:50:46 -06:00
Gregory Nutt
a916f2a008 STM32 SPI: Disable SPI before modifying CR1 2014-02-18 13:42:20 -06:00
Gregory Nutt
0c19cc2c13 More STM32F429 Discovery FPU-related changes from David Alessio 2014-02-18 12:07:17 -06:00
Gregory Nutt
4ea8d21fcc STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL 2014-02-14 09:09:56 -06:00
Gregory Nutt
b3792fcd86 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
1061e67f14 Fix error in last ARMv7-M up_disable_irq checkin 2014-01-15 15:26:32 -06:00
Gregory Nutt
e43f86071d Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip. 2014-01-15 09:56:30 -06:00
Gregory Nutt
4de5e40669 Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation 2014-01-15 08:09:19 -06:00
Gregory Nutt
dd4e64d9f3 Changes to get PX4 config to build. Also some warning removal 2014-01-14 13:30:22 -06:00
Gregory Nutt
b4a577a49e Add support for the XPT2046 touchscreen controller on the Viewtool LCD module 2014-01-09 10:57:17 -06:00
Gregory Nutt
162e240ed3 Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV 2014-01-08 16:44:11 -06:00
Gregory Nutt
e83bd3e961 Viewtools STM32F103: Add SSD1289 LCD support 2014-01-05 14:14:59 -06:00
Gregory Nutt
b1d61b4e82 STM32: Single wire UART support from Thomas Grubler 2014-01-02 07:56:46 -06:00
Gregory Nutt
543c16de75 Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb 2013-12-27 11:15:18 -06:00
Gregory Nutt
2d92d7825d STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled 2013-12-26 10:45:21 -06:00
Gregory Nutt
515fad9616 Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~ 2013-12-26 09:22:37 -06:00
Gregory Nutt
8660aed4a9 F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS 2013-12-25 18:34:15 -06:00
Gregory Nutt
4100de6648 Fix a duplicate label introduce in recent commit 2013-12-23 14:29:25 -06:00
Gregory Nutt
9c2c1e8589 Need to protect state on stack to do nested interrupt handling 2013-12-23 14:11:32 -06:00
Gregory Nutt
29c43b0b24 Fixes a few more high priority, nested interrupt logic 2013-12-23 11:13:56 -06:00
Gregory Nutt
1705b3f894 Fix some missing parameters in macros 2013-12-22 16:29:36 -06:00
Gregory Nutt
e73291a8ea Finish the high priority, nested interrupt handler test (does not work) 2013-12-22 13:23:57 -06:00
Gregory Nutt
eaed4c04a2 Finishes coding of ARMv7-M high priority nested interrupt logic. Still undocumented; still not fully tested 2013-12-21 15:05:48 -06:00
Gregory Nutt
3855ce04e8 Beginning of high priority nested interrupt support for the ARMv7-M family 2013-12-21 11:03:38 -06:00
Gregory Nutt
f3198d5812 Cosmetic: Changlog and update to comments 2013-12-20 16:24:22 -06:00
Gregory Nutt
b4144e21d6 Move include/nuttx/fb.h to include/nuttx/video/fb.h 2013-12-10 09:23:54 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
cdaa0b9671 ViewTool STM32F107: Basic NSH checks out okay 2013-12-01 10:05:40 -06:00
Gregory Nutt
ec3397dde6 STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit 2013-11-28 08:13:59 -06:00
Gregory Nutt
2036f600d7 STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file 2013-11-14 08:29:36 -06:00
Gregory Nutt
5032829f9a STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit 2013-11-11 14:05:29 -06:00
Gregory Nutt
fe800abc58 STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit 2013-11-10 07:23:06 -06:00
Gregory Nutt
38b981e50c Back out a small part of the recent STM32 usbdev fix. From David Sidrane 2013-11-07 19:07:16 -06:00
Gregory Nutt
3e2240331d STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane 2013-11-07 17:25:05 -06:00
Gregory Nutt
893f36c061 Support for the STM32F429 from Ken Pettit 2013-11-07 16:47:43 -06:00
Gregory Nutt
231a43bd8d SAMA5 PWM: Driver now in build and configuration system 2013-11-06 12:24:51 -06:00
Gregory Nutt
6be2a979ef STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane 2013-11-05 08:56:06 -06:00
Gregory Nutt
a652c6fe42 Fixing typos from previous check-ins. Also, missed the ARMv7 IDLE stack coloration 2013-11-01 16:06:43 -06:00
Gregory Nutt
04de5c4452 Port IDLE/interrupt stack coloration to ARM and ARMv7-A architectures 2013-11-01 15:30:18 -06:00
Gregory Nutt
b8085906b9 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
cfcd3cc74b arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null
ified later usbdev_unregister when the caller gets the error.  From David Sidrane
2013-10-31 15:27:52 -06:00
Gregory Nutt
848349bbd7 STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit 2013-10-27 16:23:44 -06:00
Gregory Nutt
9f5b9c20fe STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger 2013-10-24 08:27:09 -06:00
Gregory Nutt
eb648c585b Add support for the STM32F207ZE chip. From Martin Lederhilger 2013-10-24 08:25:05 -06:00
Gregory Nutt
7692af99b6 STM32 F1 DAM fix from David Sidrane 2013-10-23 14:05:26 -06:00
Gregory Nutt
b661ba3e2a STM32 DMA Priority: Select the correct default for F1 and other family members 2013-10-18 14:13:53 -06:00
Gregory Nutt
5c3f7f118c Add SDIO preflight method 2013-10-18 08:15:09 -06:00
Gregory Nutt
fd468d219f Changes to stm32_dmacapable interfaces from Mike Smith 2013-10-18 08:06:23 -06:00
Gregory Nutt
0c44715f07 STM32 DMA priority corrections from Mike Smith 2013-10-18 07:37:24 -06:00
Gregory Nutt
cda1fd00c7 Typo fixes for UART7 and UART8 DMA configs. From Mike Smith 2013-10-18 07:17:55 -06:00
Gregory Nutt
8924101566 STM32 F103C: Correct some errors in pinmapping. From David Sidrane 2013-10-16 07:26:41 -06:00
Gregory Nutt
b885459624 Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations 2013-10-02 08:24:46 -06:00
Gregory Nutt
ea4c8bbf68 Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled 2013-09-25 11:50:31 -06:00
Gregory Nutt
2c63995099 SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint 2013-09-17 10:55:13 -06:00
Gregory Nutt
64825db9c2 STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae 2013-09-13 12:45:33 -06:00
Gregory Nutt
e31f62e1b5 STM32 Kconfig: Fix STM32 UART7/8 kconfig names and UART DMA. Provided by Lorenz Meier 2013-09-13 11:45:32 -06:00
Gregory Nutt
1b17b8fbea Make filter register accessible for CAN1 and CAN2. Provided by Lorenz Meier 2013-09-13 11:20:10 -06:00
Gregory Nutt
f2a5c43b25 SAMA5: Framework for a TWI driver (incomplete) 2013-09-11 12:28:52 -06:00
Gregory Nutt
928d0ddd8a STM32 Timer Register Bit Definitions: Some CCER bit settings changed per SourceForge bug #18 submitted by CCCTSAO 2013-09-02 08:01:09 -06:00
Gregory Nutt
56f9092a87 Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
56f2b3b963 Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
57eb83da9d #17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO 2013-08-26 08:54:46 -06:00
Gregory Nutt
1f3cebdb40 SAMA5 EHCI: Added logic to detect port speed. Handling is insufficient 2013-08-24 07:36:05 -06:00