Gregory Nutt
02beb0d449
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
f6657dc512
ILI9488: Correct some data width issues. Now the ILI9488 driver works fine.
2015-04-04 10:16:30 -06:00
Gregory Nutt
cbff87cb40
ILI9488: Correct logic that gets the LCD ID
2015-04-04 10:02:31 -06:00
Gregory Nutt
c2f6a95332
SAMV17-XULT: Can't use UART3 when LCD is conencted, switch to USART0
2015-04-04 08:43:41 -06:00
Gregory Nutt
c393d39dd0
Fix typos in debug assertions
2015-04-04 06:59:14 -06:00
Gregory Nutt
5b03d5052d
More updates to README file
2015-04-03 20:12:30 -06:00
Gregory Nutt
b64dd39792
SAMV71-XULT: The ILI9488 LCD is now enabled by default in the mxtxplnd configuration
2015-04-03 20:11:39 -06:00
Gregory Nutt
0cf5088475
SAMV71-XULT ILI9488 LCD driver is code complete but untested
2015-04-03 16:36:58 -06:00
Gregory Nutt
b72cf3366c
SAMV7: Add SMC register definition header file; SAMV71-Xult: Add an LCD driver. The initial commit is simply the SAVM4E-EK ILI9375 driver will bogus name changes to ILI9488.
2015-04-03 10:28:32 -06:00
Gregory Nutt
3311bdcecb
SAMV7: Fixes to WM8904 build
2015-04-02 18:24:55 -06:00
Gregory Nutt
e78e762dd6
Add a very basic driver for the CS2100-CP Fractional-N Multipler chip.
2015-04-02 13:00:10 -06:00
Gregory Nutt
0ec67181c9
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
2015-04-01 12:37:44 -06:00
Gregory Nutt
6342459cdb
SAMV7 WM8904: Leverage WM8904 logic from the SAMA5D4-EK
2015-04-01 12:13:51 -06:00
Gregory Nutt
f6e6dacb17
Rename pwm_devinit() to board_pwm_setup(). Add CONFIG_BOARDCTL_PWMTEST that will enable calling board_pwm_setup() from boardctl(). Replace calls to pwm_devinit() in apps/examples/pwm with calls to boardctl(). In all configurations that enable the apps/examples/pwm test, make sure that boardctl() suppoprt is properly enabled.
2015-03-31 16:59:22 -06:00
Gregory Nutt
2b0202e6d7
Update several defconfig files. Make sure that every defconfig file that requires external graphics initialization also approprietly initializes boardctl().
2015-03-31 16:29:40 -06:00
Gregory Nutt
ded2001121
Rename up_nxdrvinit() to board_graphics_setup(). Add CONFIG_BOARDCTL_GRAPHICS that will enabled calls to board_graphics_setup() from boardctrl(). In apps/ and NxWidgts/, replace all calls to up_nxdrvinit with calls to boardctl().
2015-03-31 16:20:21 -06:00
Gregory Nutt
4212b9b385
Rename adc_devinit() to board_adc_setup(). Add support to the boardctl() interface so that it can call board_adc_setup() on behalf of an application. Change apps/examples/adc to that is now calls boardctl() instead of adc_devinit() in order to initalize the ADC device.
2015-03-31 15:00:23 -06:00
Gregory Nutt
cf95d1a995
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
Gregory Nutt
4a8e0e2359
NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation
2015-03-31 12:14:16 -06:00
Gregory Nutt
b4b40d338a
boardctl(): Add a new non-standard OS interface. This is similar to a driver IOCTL call. But this is an IOCTL call directly on the board logic. This function will eventually replace all of the ad hoc OS interfaces that are current used to perform application specific intialiation and application driver test confifuration. It essentially formalizes and institutionalizes these rogue interface in to at least a single crazy call.
2015-03-31 11:25:52 -06:00
Gregory Nutt
9c0441e2da
Rename arch_nshinitialize() to board_app_initialize()
2015-03-31 10:21:31 -06:00
Gregory Nutt
eb21ad0cf2
SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector
2015-03-31 09:01:38 -06:00
Gregory Nutt
c76373280b
SAMV71-XULT: Add a configuration for testing the maXTouch Xplained Pro connected to the board
2015-03-30 15:31:53 -06:00
Gregory Nutt
157c56d081
Update README
2015-03-30 07:33:48 -06:00
Gregory Nutt
dab3dbc75b
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
4593fe3797
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
8bb8f47d0b
PIC32MZ Ethernet: Enable PBCLK5 and MII divider for PHY. From Kistopher Tate
2015-03-29 07:14:09 -06:00
Gregory Nutt
b1dcacebe7
Minor update to a README
2015-03-29 07:04:39 -06:00
Gregory Nutt
ce34402dac
SAMV71-XULT: netnsh configuration is back to -O2
2015-03-28 14:54:30 -06:00
Gregory Nutt
d2fd139ebc
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
d7dbdfef58
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
756d19ff28
SAMV71-XULT: Add a network-enabled NSH configuration
2015-03-27 14:18:13 -06:00
Gregory Nutt
79734c3c13
SAMV7 Ethernet: Fix some errors in circular queue handling
2015-03-27 13:04:43 -06:00
Gregory Nutt
66670c1738
SAMV7 Ethernet+USB Updates
2015-03-27 10:47:03 -06:00
Gregory Nutt
3c433f7f35
Updated comments/README
2015-03-26 12:33:03 -06:00
Gregory Nutt
dd06cef845
SAMV7 USB: more updates
2015-03-25 15:56:10 -06:00
Gregory Nutt
3875e86436
SAMV7: Add framework for USB DCD. Initial check-in is just the SAMA5 USB DCD with naming changes to get a clean compilation. Needs careful review and comparison with datasheet and, of course, testing
2015-03-23 14:06:53 -06:00
Gregory Nutt
1802d50e3e
Refresh Configurations
2015-03-23 11:20:38 -06:00
Gregory Nutt
52d1d425c0
Calvin's changes to the tm4c123g-launchpad
2015-03-23 10:05:50 -06:00
Gregory Nutt
6a9e2946a8
Update README.txt
2015-03-22 16:34:43 -06:00
Gregory Nutt
d3ff495ebf
Update PIC32MZ README and board.h comments
2015-03-22 09:24:04 -06:00
Gregory Nutt
8276012a96
PIC32MZ: change defaults to match the MEBII board. From Kristopher Tate
2015-03-22 08:35:36 -06:00
Gregory Nutt
750bd36c21
PIC32MZ: Minor change to setenv.sh so that you can change tools correctly
2015-03-22 08:12:53 -06:00
Gregory Nutt
4cdb6e8fa6
More changes for PIC32MZ build under XC32
2015-03-21 16:38:24 -06:00
Gregory Nutt
5ed5187175
PIC23MX Starter Kit: Looks like we need to use a different linker script with Pinguino
2015-03-21 15:40:22 -06:00
Gregory Nutt
95c2b350b3
All kernel 1st pass builds: Rename files for better conformance to naming conventions
2015-03-21 15:01:32 -06:00
Gregory Nutt
b297a057f5
Neuros OSD: Rename files for better conformance to naming conventions
2015-03-21 14:51:30 -06:00
Gregory Nutt
c5511412d5
US7032EVB1: Rename files for better conformance to naming conventions
2015-03-21 14:48:48 -06:00
Gregory Nutt
19d33fb3f7
SKP16C26: Rename files for better conformance to naming conventions
2015-03-21 14:46:44 -06:00
Gregory Nutt
a975215465
Olimex-STRP711: Rename files for better conformance to naming conventions
2015-03-21 14:42:30 -06:00
