Gregory Nutt
3091050963
STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h
2017-05-11 06:58:39 -06:00
Juha Niskanen
c74a51f789
STM32L4: add internal flash write support
2017-05-11 14:35:27 +03:00
Juha Niskanen
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
Juha Niskanen
e04ea9e3e3
Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361 )
...
STM32L4: add dbgmcu header files
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-09 17:06:32 +00:00
Gregory Nutt
3d73a04259
Merged l432kc into master
2017-05-09 11:03:42 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Juha Niskanen
ce1ad33289
STM32L4: add dbgmcu header files
2017-05-09 14:13:51 +03:00
Sebastien Lorquet
d591d3ac4e
Restore settings for UARTs 4 and 5
2017-05-09 11:38:14 +02:00
Sebastien Lorquet
5204f19e4f
fix typo found by Juha during review
2017-05-09 11:32:16 +02:00
Sebastien Lorquet
c1cf1269c7
Adapt stm32l43x pin definitions
2017-05-09 10:58:04 +02:00
David Sidrane
014b69e120
removed stray paren.
2017-05-08 22:56:05 +00:00
David Sidrane
8406b40baa
Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357 )
...
stm32:Serial DMA buffer round off not up
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-08 20:32:44 +00:00
Gregory Nutt
aa11d637a8
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
David Sidrane
546e7acb99
stm32:Serial DMA buffer round off not up
2017-05-08 15:54:03 +00:00
David Sidrane
b8ef079951
stm32:stm32_serial Forgot the -1 on mask
2017-05-08 03:43:36 +00:00
David Sidrane
0b2fb5a396
Merged in david_s5/nuttx/upstream_stm_dma (pull request #355 )
...
stm32: serial Allow configuring Rx DMA buffer size
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-06 17:49:48 +00:00
David Sidrane
b62ef579c8
stm32: serial Allow configuring Rx DMA buffer size
2017-05-06 05:16:21 -10:00
David Sidrane
5d6da5f4bb
kinetis:Add ARCH_HAVE_I2CRESET
2017-05-06 04:52:48 -10:00
David Sidrane
97260321f2
kinetis:k66 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:32 -10:00
David Sidrane
ce98cedb17
kinetis:k64 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:24 -10:00
David Sidrane
af1f48c1c5
kinetis:k60 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:14 -10:00
David Sidrane
1d9d13c426
kinetis:k40 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:09 -10:00
David Sidrane
979e671cf0
kinetis:k20 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:00 -10:00
Gregory Nutt
1cd3b3f590
Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard.
2017-05-05 14:47:11 -06:00
Gregory Nutt
0e49db7626
Add a blank line.
2017-05-05 09:35:47 -06:00
Juha Niskanen
35883ff9ae
Merged in juniskane/nuttx_stm32l4/l4dev (pull request #347 )
...
STM32L4: add support for many new MCUs from STM32L4X3XX product line and Nucleo-L452 board
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-05 15:31:07 +00:00
David Sidrane
f29981e473
kinetis:Added HW flow control and termios
2017-05-05 07:33:15 -06:00
David Sidrane
b6a8db1b39
Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration
2017-05-05 07:18:39 -06:00
David Sidrane
29ef635e89
Kinetis:Add OSC_DIV to the kinetis_osc header
2017-05-05 07:16:11 -06:00
David Sidrane
f73e2aab8d
Kinetis:Fixed CLKSRC Bit Names
2017-05-05 07:14:00 -06:00
David Sidrane
2171523f50
Kinetis:Add TPM to K66 chip
2017-05-05 07:12:52 -06:00
Juha Niskanen
71accfc57b
STM32L4: add more chips to Kconfig
...
(This also removes DPFPU/DTCM/ITCM features again, fixing a
recent git history hickup.)
2017-05-05 11:03:49 +03:00
Juha Niskanen
a5e9724224
STM32L4: firewall for stm32l4x3xx
...
Not tested for any product family, but now it at least compiles.
L496 devices can have one bit wider Volatile Data Segment.
2017-05-05 10:15:09 +03:00
Juha Niskanen
075a8b913c
STM32L4: separate SYSCFG into product line specific files for clarity
2017-05-05 10:10:37 +03:00
Juha Niskanen
92f4277b1e
Merged in juniskane/nuttx_stm32l4/stm32l4_i2c_pr (pull request #346 )
...
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-04 19:29:08 +00:00
Jussi Kivilinna
7035723aeb
STM32F7 serial: Allow configuring Rx DMA buffer size
2017-05-04 07:09:19 -06:00
Jussi Kivilinna
acf0d17e5a
Fix STM32F7 I2C interrupt handler
2017-05-04 06:51:44 -06:00
Juha Niskanen
80c2d384bb
STM32L4: flash: update override config macros and add FLASH_CONFIG_B
2017-05-04 15:24:16 +03:00
Juha Niskanen
ae22eb224a
STM32L4: changes needed for STM32L452 and Nucleo-L452RE board
...
GPIO and UART seem similar across STMicro product matrix,
so renamed files accordingly. RCC is cloned just in case,
while conflicting differences there seem to be very minor.
2017-05-04 15:23:38 +03:00
Juha Niskanen
dd1b9dfa81
STM32L4: modularize Kconfig to support different product lines/families
...
This is modeled after STM32F7. Idea is to declare each chip in Kconfig
but allow for flash size override. Commit adds many STM32L4_HAVE_XXX
feature test macros.
2017-05-04 15:22:51 +03:00
Juha Niskanen
c67c4a75ba
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
2017-05-04 09:31:12 +03:00
Gregory Nutt
b0e880b04c
Revert "STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed."
...
This reverts commit 1e054a2d3b
.
2017-05-03 18:26:24 -06:00
Gregory Nutt
11c14470c3
Merge remote-tracking branch 'origin/master' into photon
2017-05-03 17:36:52 -06:00
Gregory Nutt
1e054a2d3b
STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed.
2017-05-03 17:33:35 -06:00
David Sidrane
9b5ac56409
Fixed typo and backward ifdef
2017-05-03 23:10:48 +00:00
Juha Niskanen
ad3b941c44
STM32L4: stm32l4x6xx_pinmap: update I2C4 and DCMI pins
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 10:16:34 -06:00
Juha Niskanen
74e016d013
STM32F7: flash: macro naming errors, there is no FLASH_CONFIG_F for F7
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 10:14:46 -06:00
Gregory Nutt
e94865a317
Merge remote-tracking branch 'origin/master' into photon
2017-05-02 08:49:19 -06:00
Gregory Nutt
40b5c46024
STM32L4: Delete more references to DFPU, ITCM, and DTCM.
2017-05-02 08:03:21 -06:00
Mateusz Szafoni
1feaae7222
Merged in raiden00/nuttx (pull request #338 )
...
OPAMP support for STM32F33XX
2017-05-02 13:57:56 +00:00
Juha Niskanen
a59b7bc932
STM32L4: add GPIO_PORTI definition
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 07:41:14 -06:00
Juha Niskanen
0eb14e9baa
STM32L4: don't think these chips have DPFPU, DTCM or ITCM
2017-05-02 07:36:11 -06:00
Gregory Nutt
f7a28c09b0
Merge remote-tracking branch 'origin/master' into photon
2017-05-01 18:06:23 -06:00
Gregory Nutt
c59a5efcae
STM32F0: I2C frequency quantization. Add logic to get closer if an oddball frequency is used.
2017-05-01 17:52:51 -06:00
Alan Carvalho de Assis
ccfdef6ddf
STM32F0: Fix I2C frequency table
2017-05-01 17:41:57 -06:00
Gregory Nutt
e43b86dbd0
Merge remote-tracking branch 'origin/master' into photon
2017-04-30 17:42:37 -06:00
Gregory Nutt
a8ce97715b
Tiva I2C: Update to use the standard parameter passing to interrupt handlers.
2017-04-30 14:44:39 -06:00
Gregory Nutt
0597eb5587
Fix a typo introduced in last commit.
2017-04-30 12:41:19 -06:00
Gregory Nutt
c172d7cf63
EFM32, STM32, and STM32 F7 I2C: Update to use the standard parameter passing to interrupt handlers.
2017-04-30 11:56:06 -06:00
Gregory Nutt
dee736bd0d
STM32F0 I2C: Pin definitions should specify open drain (and probably 50Mhz).
2017-04-30 10:28:16 -06:00
Gregory Nutt
0a9dd3876b
STM32F0 I2C: Upate driver to use the standard interrupt parameter passing logic.
2017-04-30 09:19:51 -06:00
raiden00pl
e4d47d61cc
STM32F33: Add OPAMP support
2017-04-30 11:05:34 +02:00
Alan Carvalho de Assis
b688d41516
STM32F0 I2C: Initial cut at driver. Still a work in progress.
2017-04-29 16:53:47 -06:00
Gregory Nutt
f0bbe56620
STM32F0: Add some protection. There is only one interrupt for USART3-8. Current interrupt handling logic will support only one interrupt in that range.
2017-04-29 12:58:06 -06:00
Gregory Nutt
a7901f5c4c
Merge remote-tracking branch 'origin/master' into photon
2017-04-29 12:35:01 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Gregory Nutt
87a4181ba3
cosmetic changes
2017-04-29 09:30:17 -06:00
Gregory Nutt
f175af3cd3
More missed enum spi_dev_e forward references.
2017-04-29 08:29:01 -06:00
Gregory Nutt
b6b16bf4da
Fix forward references that were mangled in last large changes.
2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229
misc archs
2017-04-28 18:24:06 +02:00
Sebastien Lorquet
c56c6f7ccc
ARM arch changes
2017-04-28 18:23:29 +02:00
Gregory Nutt
9431fb1d91
STM32L4: I2C was not using current interrupt handling parameter passing logic.
2017-04-28 08:21:02 -06:00
Juha Niskanen
b4d2651ca9
STM32L4: stm32l4_i2c: add I2C4 code
2017-04-28 08:09:16 -06:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
b608afc484
STM32F0: Fix some missing settings in the clock configuration logic
2017-04-27 15:44:05 -06:00
Gregory Nutt
92d761dfe3
STM32F0 Serial: Costmetic changes to spacing.
2017-04-27 09:15:18 -06:00
Sebastien Lorquet
c3119f06a2
Update STM32L4 README.txt file.
2017-04-27 08:37:14 -06:00
Juha Niskanen
f1b71e3ae7
TM32L4: Add some defines for the new peripherals in STM32L496 parts
2017-04-27 07:26:32 -06:00
Juha Niskanen
8a6662c957
TM32L4: Add some defines for the new peripherals in STM32L496 parts
2017-04-27 07:25:20 -06:00
Juha Niskanen
707d1e67fc
STM32, STM32F7, STM32L4: Remove incorrect comment about STM32L1 LSE/RTC/LCD
2017-04-27 07:18:36 -06:00
Gregory Nutt
7d8140708e
Merge remote-tracking branch 'origin/master' into photon
2017-04-26 10:42:19 -06:00
Gregory Nutt
2f9028b547
Remove all remaining references to setenv.h and setenv.bat.
2017-04-26 10:28:37 -06:00
Simon Piriou
6bb2db8c15
bcmf: enable DMA for SDIO transfers
2017-04-26 17:23:53 +02:00
Gregory Nutt
232fbf7f00
CONFIG_DEBUG_HARDFAULT should be available for Cortex-M0 too. configs/nucle-f072rb/nsh: Correct amount of available SRAM in defconfig.
2017-04-26 07:45:40 -06:00
Juha Niskanen
06e4c4aedd
STM32L4: add support for the STM32L496XX family
2017-04-25 08:47:50 -06:00
Simon Piriou
3bf5044306
stm32: cleanup stm32_sdio.c
2017-04-24 20:01:41 +02:00
Gregory Nutt
62966d915c
Merge remote-tracking branch 'origin/master' into photon
2017-04-23 10:16:54 -06:00
Gregory Nutt
ca7d88f6bb
SAM3/4: Fix a few more naming differences noted by Alan Carvalho de Assiss.
2017-04-23 08:14:49 -06:00
kc_dtm
db9143b2bd
SAM3/4: Remove inappropriate semicolon.
2017-04-23 07:21:44 -06:00
Gregory Nutt
eb1d4ca774
SAM3/4: Fixed configurations for TWI master. Obviously an incomplete port from SAMA5.
2017-04-23 07:17:55 -06:00
Gregory Nutt
a55e937643
Correct mispelling
2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
d8e4cbcfd5
Merge remote-tracking branch 'spiriou/wlan_dev' into photon
2017-04-22 08:26:40 -06:00
Jussi Kivilinna
325ba1a803
clock: add clock_resynchronize and use subseconds RTC
...
Add clock_resynchronize for better synchronization of CLOCK_REALTIME and CLOCK_MONOTONIC to match RTC after resume from low-power state.
Add up_rtc_getdatetime_with_subseconds under CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and resynchronizing) system clock with subseconds accuracy RTC.
2017-04-21 08:45:57 -06:00
Juha Niskanen (Haltian)
c04c49dac0
Add support for the STM32F09X family.
2017-04-21 08:23:25 -06:00
Gregory Nutt
f902b8b058
Merge branch 'iob'
2017-04-20 16:09:14 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
73c7f05a3c
Cosmetic changes to spacing and comments.
2017-04-20 14:08:08 -06:00
Gregory Nutt
d0ec395c42
Correct some spacing and some unused definition in some irq.h header files.
2017-04-20 12:39:21 -06:00
Gregory Nutt
bb54449889
STM32F0: Add an untested port of the F1 USB device to the STM32F0
2017-04-20 11:50:58 -06:00
Gregory Nutt
20ddbd7368
STM32F0: Add support for HSI48
2017-04-20 11:08:23 -06:00
Gregory Nutt
a98cdc7a45
Add STM32F0 USB device header file; Update TODO list.
2017-04-20 09:31:12 -06:00
Gregory Nutt
547f6c7cc3
SIM: Fix some bad naming changes associated with the simulated touchscreen.
2017-04-20 07:51:27 -06:00
Juha Niskanen
9d0ecedf7d
Add support for STM32L152CC, STM32L152RC and STM32L152VC. Update some bits and comments for other STM32L1 parts in chip.h
2017-04-20 06:30:26 -06:00
Juha Niskanen
e631ee4582
STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in bypass-mode. Allows using MCO output from ST-link chip (on Nucleo and Discovery boards) as HSE input.
2017-04-20 06:28:01 -06:00
Ian McAfee
6a2c43b0c1
SAMV7 EMAC: Add conditional logic to account the fact that the SAMV71 has 6 rather than 3 queues after version 1.
2017-04-19 14:32:28 -06:00
David Sidrane
29fe0a1b5f
Merged in david_s5/nuttx/upstream_stm32_warn (pull request #323 )
...
stm32:stm32_serial fixed warning
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-18 22:01:02 +00:00
David Sidrane
4844011b9c
stm32:stm32_serial fixed warning
2017-04-18 11:51:56 -10:00
David Sidrane
a0c4254168
Kinetis:Fixed warning
2017-04-18 10:04:54 -10:00
Gregory Nutt
27e212a291
Nucleo-F072RB: Various fixes to get the first clean build.
2017-04-18 10:37:05 -06:00
Gregory Nutt
b45472baf8
Nucleo-F072RB: Add board configuration
2017-04-18 10:07:03 -06:00
Gregory Nutt
8420e68a9b
STM32F0: The STM32F2 does not have use alternate function groupings as does the F1. Rather, it is like other members of the STM32 family with An alternate setting AF0-AF7 for each pin.
2017-04-18 08:40:14 -06:00
Gregory Nutt
04ebdbb336
Move: CONFIG_ADC_NO_START_CONV from drivers/adc/Kconfig to arch/arm/src/stm32[f7]/Kconfig as STM32[F7]_ADC_NO_START_CONV. Refresh all configurations with any reference to CONFIG_ADC_NO_START_CONV.
2017-04-18 07:16:35 -06:00
Juha Niskanen
3c0f3ea35b
STM32F7: stm32_adc: Do not override ADCPRE_DIV when measuring internal voltage
2017-04-18 06:51:20 -06:00
Juha Niskanen
54eae7dcde
STM32F7: warn if no DMA2 configured when using ADC with DMA. Also correct ADC channel numbers that DMA callback passes to upper half driver.
2017-04-18 06:49:51 -06:00
Gregory Nutt
de22d24f8e
More changes UART to USART. Fix garbage code in stm32f0_serial.h that was clearing HAVE_USART
2017-04-17 18:37:52 -06:00
Gregory Nutt
924f58fb2b
STM32F0: Change HAVE_UART to HAVE_USART
2017-04-17 17:53:04 -06:00
Gregory Nutt
acdc26f972
STM32F0: Add logic to enable other USARTs. No UART4/5. Rather USART4/5.
2017-04-17 17:51:05 -06:00
Gregory Nutt
639bf31eb4
Move enabling of GPIO peripherals form UART setup to clockconfig. This is not a UART function. It is needed by all periphrals.
2017-04-17 17:20:55 -06:00
Gregory Nutt
8b157b034d
STM32F0: Fixes to get STM32F0-Discovery build again after changes to support the STM32F07x
2017-04-17 17:13:32 -06:00
Gregory Nutt
2c01aaad59
STM32F0: Add basic support for STM32F07x family
2017-04-17 16:54:07 -06:00
Alan Carvalho de Assis
b0597583da
Fix System Clock value to 48MHz and remove MCLK definition
2017-04-17 12:48:07 -06:00
Alan Carvalho de Assis
735f4d6ea5
STM32F0: Enable the clock for all GPIO ports
2017-04-17 09:58:04 -06:00
Gregory Nutt
cd62425433
STM32F0: type of regval should be uint32_t in clockconfig(). Fix a warning from __start().
2017-04-17 09:17:31 -06:00
Gregory Nutt
55faedb40d
STM32F0: Ooops Missing semicolon
2017-04-17 08:57:00 -06:00
Gregory Nutt
0d9395588b
STM32F0: Fix an error in clockconfig()
2017-04-17 08:50:03 -06:00
phreakuencies
eac049222c
STM32: Provide TIM5 definition for STM32F429
2017-04-15 12:10:42 -06:00
Gregory Nutt
78bc1aa6bc
Argument of network device IOCTL should be unsigned long, just as will all other IOCTL methods.
2017-04-15 09:33:27 -06:00
Simon Piriou
11d3db5c35
photon: add sdpcm + thread support for wlan
2017-04-15 11:39:13 +02:00
Alan Carvalho de Assis
03cbf21cd8
Replace HAVE_USART with HAVE_UART
2017-04-14 11:44:51 -06:00
Alan Carvalho de Assis
4602212612
Fix serial compilation issues
2017-04-14 11:42:20 -06:00
Gregory Nutt
879273f63e
arch/arm/Kconfig: Add option for STM32F0
2017-04-14 09:32:15 -06:00
Alan Carvalho de Assis
2cc7744b0c
Add stm32f0discovery board support
2017-04-14 08:34:38 -06:00
Gregory Nutt
c910334ced
Make sure that Alan is listed as author in new files.
2017-04-14 08:34:37 -06:00
Alan Carvalho de Assis
c3e0ec369f
Add basic support for STM32F0
2017-04-14 08:34:36 -06:00
Sebastien Lorquet
dc2890904d
STM32L4 DMA: Correct bad channel definition.
2017-04-12 10:25:51 -06:00
Alan Carvalho de Assis
a58823c449
STM32XX: Fix Pending Register definition
2017-04-11 06:45:45 -06:00
Jussi Kivilinna
4c99a6aeec
STM32F7: serial: do not stop processing input in SW flow-control mode
2017-04-11 06:40:44 -06:00
Jussi Kivilinna
e9a8dc7c6e
STM32F7: serial: disallow broken configuration combination of CONFIG_STM32F7_FLOWCONTROL_BROKEN=y and CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS not set.
2017-04-11 06:39:27 -06:00
Gregory Nutt
ebd2416f9d
stm32 COMP: Logic in stm32_comp.h must be configured on CONFIG_STM32_COMP or otherwise it causes an error via #error on every platform without COMP support.
2017-04-09 11:47:57 -06:00
Gregory Nutt
fe722e44b9
6loWPAN: Fix a faulty assumption about relationship between some sizes and offsets.
2017-04-08 08:14:42 -06:00
Masayuki Ishikawa
b4e01ecbf9
Merged in masayuki2009/nuttx.nuttx/fix_efm32_i2c_timeout (pull request #312 )
...
EFM32 I2C: Fix timeout calculation
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-06 22:59:34 +00:00
Jussi Kivilinna
e3b3e57e56
RTC: add interface for check if RTC time has been set
...
New interface allows checking if RTC time has been set. This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
2017-04-06 09:53:11 -06:00
Gregory Nutt
ac8ddf4eb1
SAMv7: In review of last patch, change literal 0xfff to WDT_MR_WDD_MAX for portability.
2017-04-06 09:46:04 -06:00
Frank Benkert
571f3d952e
SAMV7: Watchdog: fix Forbidden Window Value
...
According the Datasheet the WDD Value is the lower bound of a so called Forbidden Window and to disable this we have to set the WDD
Value greater than or equal to the WDV Value. This seems to be a bug in the datasheet. It looks like we have to set it to a greater value than the WDV to realy disable this Thing. When triggering the Watchdog faster than the (very slow) clock source of the Watchdog fires, this Forbidden Window Feature resets the System if WDD equals to WDV.
This Changeset disables the Forbidden Window by setting the WDD Value to the Maximum (0xfff) Value possible.
2017-04-06 09:43:07 -06:00
Jussi Kivilinna
0aa52d98a2
STM32F7: add warning for RXDMA + IFLOWCONTROL combination
...
Combination of RXDMA + IFLOWCONTROL does not work as one might expect.
Since RXDMA uses circular DMA-buffer, DMA will always keep reading new
data from USART peripheral even if DMA buffer underruns. Thus this
combination only does following: RTS is asserted on USART setup and
deasserted on shutdown and does not perform actual RTS flow-control.
Data loss can be demonstrated by doing long up_mdelay inside irq
critical section and feeding data to RXDMA+IFLOWCONTROL UART.
2017-04-06 08:47:45 -06:00
Jussi Kivilinna
e2702cbe4e
STM32F7: fix UART7 and UART8 IFLOWCONTROL options
2017-04-06 08:46:24 -06:00
Jussi Kivilinna
dabf45f100
STM32F7: default CONFIG_STM32F7_DMACAPABLE to 'n'. STM32F7 does not have CCM RAM but DTCM, so this option does not need to enabled. DTCM RAM is DMA-able through CPU AHBS bus.
2017-04-06 08:44:53 -06:00
Jussi Kivilinna
e180522854
stm32f7: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart
2017-04-06 08:41:41 -06:00
Alan Carvalho de Assis
95941b4908
STM32: Fix SYSCFG_CFGR1_I2C_PBXFMP_SHIFT value
2017-04-06 08:35:33 -06:00