/****************************************************************************
 * sched/task/task_spawnparms.c
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <fcntl.h>
#include <spawn.h>
#include <assert.h>
#include <debug.h>
#include <errno.h>

#include <nuttx/mutex.h>
#include <nuttx/signal.h>
#include <nuttx/spawn.h>
#include <nuttx/fs/fs.h>

#include "task/spawn.h"
#include "task/task.h"

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: nxspawn_close, nxspawn_dup2, and nxspawn_open
 *
 * Description:
 *   Implement individual file actions
 *
 * Input Parameters:
 *   action - describes the action to be performed
 *
 * Returned Value:
 *   posix_spawn() and posix_spawnp() will return zero on success.
 *   Otherwise, an error number will be returned as the function return
 *   value to indicate the error.
 *
 ****************************************************************************/

static inline void
nxspawn_close(FAR struct tcb_s *tcb,
              FAR struct spawn_close_file_action_s *action)
{
  /* The return value from nx_close() is ignored */

  sinfo("Closing fd=%d\n", action->fd);

  nx_close_from_tcb(tcb, action->fd);
}

static inline int nxspawn_dup2(FAR struct tcb_s *tcb,
                               FAR struct spawn_dup2_file_action_s *action)
{
  /* Perform the dup */

  sinfo("Dup'ing %d->%d\n", action->fd1, action->fd2);

  return nx_dup2_from_tcb(tcb, action->fd1, action->fd2);
}

static inline int nxspawn_open(FAR struct tcb_s *tcb,
                               FAR struct spawn_open_file_action_s *action)
{
  int ret = OK;
  int fd;

  /* Open the file */

  sinfo("Open'ing path=%s oflags=%04x mode=%04x\n",
        action->path, action->oflags, action->mode);

  nx_close_from_tcb(tcb, action->fd);

  fd = nx_open_from_tcb(tcb, action->path, action->oflags, action->mode);
  if (fd < 0)
    {
      ret = fd;
    }
  else if (fd != action->fd)
    {
      ret = nx_dup2_from_tcb(tcb, fd, action->fd);
      if (ret >= 0)
        {
          ret = OK;
        }

      nx_close_from_tcb(tcb, fd);
    }

  return ret;
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: spawn_execattrs
 *
 * Description:
 *   Set attributes of the new child task after it has been spawned.
 *
 * Input Parameters:
 *
 *   pid - The pid of the new task.
 *   attr - The attributes to use
 *
 * Returned Value:
 *   Errors are not reported by this function.  This is not because errors
 *   cannot occur, but rather that the new task has already been started
 *   so there is no graceful way to handle errors detected in this context
 *   (unless we delete the new task and recover).
 *
 * Assumptions:
 *   That task has been started but has not yet executed because pre-
 *   emption is disabled.
 *
 ****************************************************************************/

int spawn_execattrs(pid_t pid, FAR const posix_spawnattr_t *attr)
{
  struct sched_param param;
  int ret;

  DEBUGASSERT(attr);

  /* Now set the attributes.  Note that we ignore all of the return values
   * here because we have already successfully started the task.  If we
   * return an error value, then we would also have to stop the task.
   */

  /* Firstly, set the signal mask if requested to do so */

  if ((attr->flags & POSIX_SPAWN_SETSIGMASK) != 0)
    {
      FAR struct tcb_s *tcb = nxsched_get_tcb(pid);
      if (tcb)
        {
          tcb->sigprocmask = attr->sigmask;
        }
    }

  /* If we are only setting the priority, then call sched_setparm()
   * to set the priority of the of the new task.
   */

  if ((attr->flags & POSIX_SPAWN_SETSCHEDPARAM) != 0)
    {
#ifdef CONFIG_SCHED_SPORADIC
      /* Get the current sporadic scheduling parameters.  Those will not be
       * modified.
       */

      ret = nxsched_get_param(pid, &param);
      if (ret < 0)
        {
          return ret;
        }
#endif

      /* Get the priority from the attributes */

      param.sched_priority = attr->priority;

      /* If we are setting *both* the priority and the scheduler,
       * then we will call nxsched_set_scheduler() below.
       */

      if ((attr->flags & POSIX_SPAWN_SETSCHEDULER) == 0)
        {
          sinfo("Setting priority=%d for pid=%d\n",
                param.sched_priority, pid);

          ret = nxsched_set_param(pid, &param);
          if (ret < 0)
            {
              return ret;
            }
        }
    }

  /* If we are only changing the scheduling policy, then reset
   * the priority to the default value (the same as this thread) in
   * preparation for the nxsched_set_scheduler() call below.
   */

  else if ((attr->flags & POSIX_SPAWN_SETSCHEDULER) != 0)
    {
      ret = nxsched_get_param(0, &param);
      if (ret < 0)
        {
          return ret;
        }
    }

  /* Are we setting the scheduling policy?  If so, use the priority
   * setting determined above.
   */

  if ((attr->flags & POSIX_SPAWN_SETSCHEDULER) != 0)
    {
      sinfo("Setting policy=%d priority=%d for pid=%d\n",
            attr->policy, param.sched_priority, pid);

#ifdef CONFIG_SCHED_SPORADIC
      /* But take the sporadic scheduler parameters from the attributes */

      param.sched_ss_low_priority        = (int)attr->low_priority;
      param.sched_ss_max_repl            = (int)attr->max_repl;
      param.sched_ss_repl_period.tv_sec  = attr->repl_period.tv_sec;
      param.sched_ss_repl_period.tv_nsec = attr->repl_period.tv_nsec;
      param.sched_ss_init_budget.tv_sec  = attr->budget.tv_sec;
      param.sched_ss_init_budget.tv_nsec = attr->budget.tv_nsec;
#endif
      nxsched_set_scheduler(pid, attr->policy, &param);
    }

  return OK;
}

/****************************************************************************
 * Name: spawn_file_actions
 *
 * Description:
 *   Perform Spawn file object that specifies file-related actions
 *
 * Input Parameters:
 *
 *   actions - The spawn file actions
 *
 * Returned Value:
 *   0 (OK) on success; A negated errno value is returned on failure.
 *
 ****************************************************************************/

int spawn_file_actions(FAR struct tcb_s *tcb,
                       FAR const posix_spawn_file_actions_t *actions)
{
  FAR struct spawn_general_file_action_s *entry;
  int ret = OK;

  /* Execute each file action */

  for (entry = (FAR struct spawn_general_file_action_s *)actions;
       entry && ret >= 0;
       entry = entry->flink)
    {
      switch (entry->action)
        {
          case SPAWN_FILE_ACTION_CLOSE:

            /* Ignore return value of nxspawn_close(),
             * Closing an invalid file descriptor will
             * not cause the action fail.
             */

            nxspawn_close(tcb, (FAR void *)entry);
            break;

          case SPAWN_FILE_ACTION_DUP2:
            ret = nxspawn_dup2(tcb, (FAR void *)entry);
            break;

          case SPAWN_FILE_ACTION_OPEN:
            ret = nxspawn_open(tcb, (FAR void *)entry);
            break;

          case SPAWN_FILE_ACTION_NONE:
          default:
            serr("ERROR: Unknown action: %d\n", entry->action);
            ret = -EINVAL;
            break;
        }
    }

  return ret;
}

/****************************************************************************
 * Name: spawn_file_is_duplicateable
 *
 * Description:
 *   Check the input file descriptor is duplicateable from spawn actions
 *
 * Input Parameters:
 *
 *   actions - The spawn file actions
 *   fd      - file descriptor
 *
 * Returned Value:
 *   True is returned if file descriptor is duplicate able
 *
 ****************************************************************************/

bool
spawn_file_is_duplicateable(FAR const posix_spawn_file_actions_t *actions,
                            int fd, bool cloexec)
{
  FAR struct spawn_general_file_action_s *entry;
  FAR struct spawn_close_file_action_s *close;
  FAR struct spawn_open_file_action_s *open;
  FAR struct spawn_dup2_file_action_s *dup2;

  /* check each file action */

  for (entry = (FAR struct spawn_general_file_action_s *)actions;
       entry != NULL;
       entry = entry->flink)
    {
      switch (entry->action)
        {
          case SPAWN_FILE_ACTION_CLOSE:
            close = (FAR struct spawn_close_file_action_s *)entry;
            if (close->fd == fd)
              {
                return false;
              }
            break;

          case SPAWN_FILE_ACTION_DUP2:
            dup2 = (FAR struct spawn_dup2_file_action_s *)entry;
            if (dup2->fd1 == fd)
              {
                return true;
              }
            else if (dup2->fd2 == fd)
              {
                return false;
              }
            break;

          case SPAWN_FILE_ACTION_OPEN:
            open = (FAR struct spawn_open_file_action_s *)entry;
            if (open->fd == fd)
              {
                return false;
              }
            break;

          default:
            break;
        }
    }

  if (cloexec)
    {
      return false;
    }

  return true;
}