/**************************************************************************** * wireless/ieee802154/mac802154_data.c * * SPDX-License-Identifier: Apache-2.0 * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include "mac802154.h" #include "mac802154_internal.h" #include "mac802154_data.h" #include /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mac802154_req_data * * Description: * The MCPS-DATA.request primitive requests the transfer of a data SPDU * (i.e., MSDU) from a local SSCS entity to a single peer SSCS entity. * Confirmation is returned via the * struct mac802154_maccb_s->conf_data callback. * ****************************************************************************/ int mac802154_req_data(MACHANDLE mac, FAR const struct ieee802154_frame_meta_s *meta, FAR struct iob_s *frame) { FAR struct ieee802154_privmac_s *priv = (FAR struct ieee802154_privmac_s *)mac; FAR struct ieee802154_txdesc_s *txdesc; uint16_t *frame_ctrl; uint8_t mhr_len = 3; int ret; wlinfo("Accepting outbound frame io_len=%u io_offset=%u\n", frame->io_len, frame->io_offset); /* Check the required frame size */ if (frame->io_len > IEEE802154_MAX_PHY_PACKET_SIZE) { return -E2BIG; } /* Cast the first two bytes of the IOB to a uint16_t frame control field */ frame_ctrl = (FAR uint16_t *)&frame->io_data[0]; /* Ensure we start with a clear frame control field */ *frame_ctrl = 0; /* Set the frame type to Data */ *frame_ctrl |= IEEE802154_FRAME_DATA << IEEE802154_FRAMECTRL_SHIFT_FTYPE; /* If the msduLength is greater than aMaxMACSafePayloadSize, the MAC * sublayer will set the Frame Version to one. [1] pg. 118. */ if ((frame->io_len - frame->io_offset) > IEEE802154_MAX_SAFE_MAC_PAYLOAD_SIZE) { *frame_ctrl |= (1 << IEEE802154_FRAMECTRL_SHIFT_VERSION); } /* If the TXOptions parameter specifies that an acknowledged transmission * is required, the AR field will be set appropriately, as described in * 5.1.6.4 [1] pg. 118. */ *frame_ctrl |= (meta->flags.ackreq << IEEE802154_FRAMECTRL_SHIFT_ACKREQ); /* If the destination address is present, copy the PAN ID and one of the * addresses, depending on mode, into the MHR. */ if (meta->destaddr.mode != IEEE802154_ADDRMODE_NONE) { IEEE802154_PANIDCOPY(&frame->io_data[mhr_len], meta->destaddr.panid); mhr_len += IEEE802154_PANIDSIZE; if (meta->destaddr.mode == IEEE802154_ADDRMODE_SHORT) { IEEE802154_SADDRCOPY(&frame->io_data[mhr_len], meta->destaddr.saddr); mhr_len += IEEE802154_SADDRSIZE; } else if (meta->destaddr.mode == IEEE802154_ADDRMODE_EXTENDED) { int index; /* The IEEE 802.15.4 Standard is confusing with regards to * byte-order for * extended address. More research discovers * that the extended address should be sent in reverse-canonical * form. */ for (index = IEEE802154_EADDRSIZE - 1; index >= 0; index--) { frame->io_data[mhr_len++] = meta->destaddr.eaddr[index]; } } } /* Set the destination addr mode inside the frame control field */ *frame_ctrl |= (meta->destaddr.mode << IEEE802154_FRAMECTRL_SHIFT_DADDR); /* From this point on, we need exclusive access to the privmac struct */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { /* Should only fail if interrupted by a signal */ wlwarn("WARNING: nxmutex_lock failed: %d\n", ret); return ret; } /* If both destination and source addressing information is present, the * MAC sublayer shall compare the destination and source PAN identifiers. * [1] pg. 41. */ if (meta->srcmode != IEEE802154_ADDRMODE_NONE && meta->destaddr.mode != IEEE802154_ADDRMODE_NONE) { /* If the PAN identifiers are identical, the PAN ID Compression field * shall be set to one, and the source PAN identifier shall be omitted * from the transmitted frame. [1] pg. 41. */ if (IEEE802154_PANIDCMP(meta->destaddr.panid, priv->addr.panid)) { *frame_ctrl |= IEEE802154_FRAMECTRL_PANIDCOMP; } } if (meta->srcmode != IEEE802154_ADDRMODE_NONE) { /* If the destination address is not included, or if PAN ID Compression * is off, we need to include the Source PAN ID. */ if ((meta->destaddr.mode == IEEE802154_ADDRMODE_NONE) || (!(*frame_ctrl & IEEE802154_FRAMECTRL_PANIDCOMP))) { IEEE802154_PANIDCOPY(&frame->io_data[mhr_len], priv->addr.panid); mhr_len += IEEE802154_PANIDSIZE; } if (meta->srcmode == IEEE802154_ADDRMODE_SHORT) { IEEE802154_SADDRCOPY(&frame->io_data[mhr_len], priv->addr.saddr); mhr_len += IEEE802154_SADDRSIZE; } else if (meta->srcmode == IEEE802154_ADDRMODE_EXTENDED) { int index; /* The IEEE 802.15.4 Standard is confusing with regards to * byte-order for * extended address. More research discovers * that the extended address should be sent in reverse-canonical * form. */ for (index = IEEE802154_EADDRSIZE - 1; index >= 0; index--) { frame->io_data[mhr_len++] = priv->addr.eaddr[index]; } } } else { /* If this device is not the PAN coordinator, it shouldn't be sending * frames with a source address mode of NONE */ if (priv->devmode != IEEE802154_DEVMODE_PANCOORD) { ret = -EINVAL; goto errout_with_lock; } } /* Set the source addr mode inside the frame control field */ *frame_ctrl |= (meta->srcmode << IEEE802154_FRAMECTRL_SHIFT_SADDR); /* Each time a data or a MAC command frame is generated, the MAC sublayer * shall copy the value of macDSN into the Sequence Number field of the MHR * of the outgoing frame and then increment it by one. [1] pg. 40. */ frame->io_data[2] = priv->dsn++; /* The MAC header we just created must never have exceeded where the app * data starts. This should never happen since the offset should have * been set via the same logic to calculate the header length as the logic * here that created the header */ wlinfo("mhr_len=%u\n", mhr_len); DEBUGASSERT(mhr_len == frame->io_offset); /* Allocate the txdesc, waiting if necessary, allow interruptions */ ret = mac802154_txdesc_alloc(priv, &txdesc); if (ret < 0) { /* Should only fail if interrupted by a signal while re-acquiring * lock. So the lock is not held if a failure is returned. */ wlwarn("WARNING: mac802154_txdesc_alloc failed: %d\n", ret); goto errout_with_lock; } /* Set the offset to 0 to include the header ( we do not want to * modify the frame until AFTER the last place that -EINTR could * be returned and could generate a retry. Subsequent error returns * are fatal and no retry should occur. */ frame->io_offset = 0; /* Then initialize the TX descriptor */ txdesc->conf->handle = meta->handle; txdesc->frame = frame; txdesc->frametype = IEEE802154_FRAME_DATA; txdesc->ackreq = meta->flags.ackreq; /* If the TxOptions parameter specifies that a GTS transmission is * required, the MAC sublayer will determine whether it has a valid GTS as * described 5.1.7.3. If a valid GTS could not be found, the MAC sublayer * will discard the MSDU. If a valid GTS was found, the MAC sublayer will * defer, if necessary, until the GTS. If the TxOptions parameter specifies * that a GTS transmission is not required, the MAC sublayer will transmit * the MSDU using either slotted CSMA-CA in the CAP for a beacon-enabled * PAN or unslotted CSMA-CA for a nonbeacon-enabled PAN. Specifying a GTS * transmission in the TxOptions parameter overrides an indirect * transmission request. [1] pg. 118. */ if (meta->flags.usegts) { /* TODO: * Support GTS transmission. This should just change where we link * the transaction. Instead of going in the CSMA transaction list, it * should be linked to the GTS' transaction list. We'll need to check * if the GTS is valid, and then find the GTS, before linking. * Note, we also don't have to try and kick-off any transmission here. */ ret = -ENOTSUP; goto errout_with_txdesc; } else { /* If the TxOptions parameter specifies that an indirect transmission * is required and this primitive is received by the MAC sublayer of a * coordinator, the data frame is sent using indirect transmission, as * described in 5.1.5 and 5.1.6.3. [1] */ if (meta->flags.indirect) { /* If the TxOptions parameter specifies that an indirect * transmission is required and if the device receiving this * primitive is not a coordinator, the destination address is not * present, or the TxOptions parameter also specifies a * GTS transmission, the indirect transmission option will be * ignored. [1] * * NOTE: We don't just ignore the parameter. Instead, we throw an * error, since this really shouldn't be happening. */ if (priv->devmode >= IEEE802154_DEVMODE_COORD && meta->destaddr.mode != IEEE802154_ADDRMODE_NONE) { /* Copy in a reference to the destination address to assist in * searching when data is requested. */ memcpy(&txdesc->destaddr, &meta->destaddr, sizeof(struct ieee802154_addr_s)); mac802154_setupindirect(priv, txdesc); nxmutex_unlock(&priv->lock); } else { ret = -EINVAL; goto errout_with_txdesc; } } else { /* Link the transaction into the CSMA transaction list */ sq_addlast((FAR sq_entry_t *)txdesc, &priv->csma_queue); /* We no longer need to have the MAC layer locked. */ nxmutex_unlock(&priv->lock); /* Notify the radio driver that there is data available */ priv->radio->txnotify(priv->radio, false); } } return OK; errout_with_txdesc: /* Free TX the descriptor, but preserve the IOB. */ txdesc->frame = NULL; mac802154_txdesc_free(priv, txdesc); errout_with_lock: nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Internal MAC Functions ****************************************************************************/