==========================
``module`` Loadable Module
==========================

This example builds a small loadable module test case. This includes a character
driver under ``examples/module/drivers``. This driver is built using the
relocatable ELF format and installed in a ROMFS file system. At run time, the
driver module is loaded and exercised. Requires ``CONFIG_MODULE``. Other
configuration options:

- ``CONFIG_EXAMPLES_ELF_DEVMINOR`` – The minor device number of the ROMFS block
  driver. For example, the ``N`` in ``/dev/ramN``. Used for registering the RAM
  block driver that will hold the ROMFS file system containing the ELF
  executables to be tested. Default: ``0``.

- ``CONFIG_EXAMPLES_ELF_DEVPATH`` – The path to the ROMFS block driver device.
  This must match ``EXAMPLES_ELF_DEVMINOR``. Used for registering the RAM block
  driver that will hold the ROMFS file system containing the ELF executables to
  be tested. Default: ``/dev/ram0``.

**Notes**:

1. ``CFLAGS`` should be provided in ``CMODULEFLAGS``. RAM and FLASH memory regions
   may require long allcs. For ARM, this might be::

     CMODULEFLAGS = $(CFLAGS) -mlong-calls

   Similarly for C++ flags which must be provided in ``CXXMODULEFLAGS``.

2. Your top-level ``nuttx/Make.defs`` file must also include an appropriate
   definition, LDMODULEFLAGS, to generate a relocatable ELF object. With GNU LD,
   this should include ``-r`` and ``-e <entry point>``.::

     LDMODULEFLAGS = -r -e module_initialize

   If you use GCC to link, you make also need to include ``-nostdlib``.

3. This example also requires ``genromfs``. ``genromfs`` can be build as part of the
   nuttx toolchain. Or can built from the ``genromfs`` sources that can be found
   in the NuttX tools repository (``genromfs-0.5.2.tar.gz``). In any event, the
   PATH variable must include the path to the ``genromfs`` executable.

4. ELF size: The ELF files in this example are, be default, quite large because
   they include a lot of build garbage. You can greatly reduce the size of the
   ELF binaries are using the ``objcopy --strip-unneeded`` command to remove
   un-necessary information from the ELF files.

5. Simulator. You cannot use this example with the NuttX simulator on Cygwin.
   That is because the Cygwin GCC does not generate ELF file but rather some
   Windows-native binary format.

   If you really want to do this, you can create a NuttX x86 ``buildroot``
   toolchain and use that be build the ELF executables for the ROMFS file
   system.

6. Linker scripts. You might also want to use a linker scripts to combine
   sections better. An example linker script is at
   ``nuttx/libc/modlib/gnu-elf.ld``. That example might have to be tuned for your
   particular linker output to position additional sections correctly. The GNU
   LD ``LDMODULEFLAGS`` then might be::

     LDMODULEFLAGS = -r -e module_initialize -T$(TOPDIR)/libc/modlib/gnu-elf.ld