/**************************************************************************** * drivers/mmcsd/mmcsd_sdio.h * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ #ifndef __DRIVERS_MMCSD_MMCSD_SDIO_H #define __DRIVERS_MMCSD_MMCSD_SDIO_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* CMD6 (MMC_SWITCH) argument * MMC_SWITCH argument format: * * [31:26] Always 0 * [25:24] Access Mode * [23:16] Location of target Byte in EXT_CSD * [15:08] Value Byte * [07:03] Always 0 * [02:00] Command Set */ #define MMCSD_CMD6_BUSWIDTH_RWSHIFT (16) # define MMCSD_CMD6_BUSWIDTH_RW ((uint32_t)0xb7 << MMCSD_CMD6_BUSWIDTH_RWSHIFT) /* R/W */ #define MMCSD_CMD6_WRITE_BYTE_SHIFT (24) # define MMCSD_CMD6_MODE_CMD_SET ((uint32_t)0x00 << MMCSD_CMD6_WRITE_BYTE_SHIFT) /* Change the command set */ # define MMCSD_CMD6_MODE_SET_BITS ((uint32_t)0x01 << MMCSD_CMD6_WRITE_BYTE_SHIFT) /* Set bits which are 1 in value */ # define MMCSD_CMD6_MODE_CLEAR_BITS ((uint32_t)0x02 << MMCSD_CMD6_WRITE_BYTE_SHIFT) /* Clear bits which are 1 in value */ # define MMCSD_CMD6_MODE_WRITE_BYTE ((uint32_t)0x03 << MMCSD_CMD6_WRITE_BYTE_SHIFT) /* Set target to value */ #define MMCSD_CMD6_BUS_WIDTH_SHIFT (8) # define MMCSD_CMD6_BUS_WIDTH_1 ((uint32_t)0x00 << MMCSD_CMD6_BUS_WIDTH_SHIFT) /* Card is in 1 bit mode */ # define MMCSD_CMD6_BUS_WIDTH_4 ((uint32_t)0x01 << MMCSD_CMD6_BUS_WIDTH_SHIFT) /* Card is in 4 bit mode */ # define MMCSD_CMD6_CSD_BUS_WIDTH_8 ((uint32_t)0x02 << MMCSD_CMD6_BUS_WIDTH_SHIFT) /* Card is in 8 bit mode */ # define MMCSD_CMD6_DDR_BUS_WIDTH_4 ((uint32_t)0x05 << MMCSD_CMD6_BUS_WIDTH_SHIFT) /* Card is in 4 bit DDR mode */ # define MMCSD_CMD6_DDR_BUS_WIDTH_8 ((uint32_t)0x06 << MMCSD_CMD6_BUS_WIDTH_SHIFT) /* Card is in 8 bit DDR mode */ /* CMD8 Argument: * [31:12]: Reserved (shall be set to '0') * [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) * [7:0]: Check Pattern (recommended 0xaa) * CMD8 Response: R7 */ #define MMCSD_CMD8VOLTAGE_SHIFT (8) /* Bits 8-11: Supply voltage */ #define MMCSD_CMD8VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_CMD8VOLTAGE_SHIFT) # define MMCSD_CMD8VOLTAGE_27 ((uint32_t)0x01 << MMCSD_CMD8VOLTAGE_SHIFT) /* 2.7-3.6V */ #define MMCSD_CMD8ECHO_SHIFT (0) /* Bits 0-7: Check pattern */ #define MMCSD_CMD8ECHO_MASK ((uint32_t)0xff << MMCSD_CMD8ECHO_SHIFT) # define MMCSD_CMD8CHECKPATTERN ((uint32_t)0xaa << MMCSD_CMD8ECHO_SHIFT) /* ACMD6 argument */ #define MMCSD_ACMD6_BUSWIDTH_1 ((uint32_t)0) /* Bus width = 1-bit */ #define MMCSD_ACMD6_BUSWIDTH_4 ((uint32_t)2) /* Bus width = 4-bit */ /* ACMD41 argument */ #define MMCSD_ACMD41_VOLTAGEWINDOW_34_33 ((uint32_t)1 << 21) #define MMCSD_ACMD41_VOLTAGEWINDOW_33_32 ((uint32_t)1 << 20) #define MMCSD_ACMD41_VOLTAGEWINDOW_32_31 ((uint32_t)1 << 19) #define MMCSD_ACMD41_HIGHCAPACITY ((uint32_t)1 << 30) #define MMCSD_ACMD41_STDCAPACITY ((uint32_t)0 << 30) /* ACMD42 argument */ #define MMCSD_ACMD42_CD_DISCONNECT ((uint32_t)0) /* Disconnect card detection logic */ #define MMCSD_ACMD42_CD_CONNECT ((uint32_t)1) /* Connect card detection logic */ /* R1 Card Status bit definitions */ #define MMCSD_R1_OUTOFRANGE ((uint32_t)1 << 31) /* Bad argument */ #define MMCSD_R1_ADDRESSERROR ((uint32_t)1 << 30) /* Bad address */ #define MMCSD_R1_BLOCKLENERROR ((uint32_t)1 << 29) /* Bad block length */ #define MMCSD_R1_ERASESEQERROR ((uint32_t)1 << 28) /* Erase cmd error */ #define MMCSD_R1_ERASEPARAM ((uint32_t)1 << 27) /* Bad write blocks */ #define MMCSD_R1_WPVIOLATION ((uint32_t)1 << 26) /* Erase access failure */ #define MMCSD_R1_CARDISLOCKED ((uint32_t)1 << 25) /* Card is locked */ #define MMCSD_R1_LOCKUNLOCKFAILED ((uint32_t)1 << 24) /* Password error */ #define MMCSD_R1_COMCRCERROR ((uint32_t)1 << 23) /* CRC error */ #define MMCSD_R1_ILLEGALCOMMAND ((uint32_t)1 << 22) /* Bad command */ #define MMCSD_R1_CARDECCFAILED ((uint32_t)1 << 21) /* Failed to correct data */ #define MMCSD_R1_CCERROR ((uint32_t)1 << 20) /* Card controller error */ #define MMCSD_R1_ERROR ((uint32_t)1 << 19) /* General error */ #define MMCSD_R1_UNDERRUN ((uint32_t)1 << 18) /* Underrun (MMC only) */ #define MMCSD_R1_OVERRRUN ((uint32_t)1 << 17) /* Overrun (MMC only) */ #define MMCSD_R1_CIDCSDOVERWRITE ((uint32_t)1 << 16) /* CID/CSD error */ #define MMCSD_R1_WPERASESKIP ((uint32_t)1 << 15) /* Not all erased */ #define MMCSD_R1_CARDECCDISABLED ((uint32_t)1 << 14) /* Internal ECC not used */ #define MMCSD_R1_ERASERESET ((uint32_t)1 << 13) /* Reset sequence cleared */ #define MMCSD_R1_STATE_SHIFT (9) /* Current card state */ #define MMCSD_R1_STATE_MASK ((uint32_t)15 << MMCSD_R1_STATE_SHIFT) /* Card identification mode states */ # define MMCSD_R1_STATE_IDLE ((uint32_t)0 << MMCSD_R1_STATE_SHIFT) /* 0=Idle state */ # define MMCSD_R1_STATE_READY ((uint32_t)1 << MMCSD_R1_STATE_SHIFT) /* 1=Ready state */ # define MMCSD_R1_STATE_IDENT ((uint32_t)2 << MMCSD_R1_STATE_SHIFT) /* 2=Identification state */ /* Data transfer states */ # define MMCSD_R1_STATE_STBY ((uint32_t)3 << MMCSD_R1_STATE_SHIFT) /* 3=Standby state */ # define MMCSD_R1_STATE_TRAN ((uint32_t)4 << MMCSD_R1_STATE_SHIFT) /* 4=Transfer state */ # define MMCSD_R1_STATE_DATA ((uint32_t)5 << MMCSD_R1_STATE_SHIFT) /* 5=Sending data state */ # define MMCSD_R1_STATE_RCV ((uint32_t)6 << MMCSD_R1_STATE_SHIFT) /* 6=Receiving data state */ # define MMCSD_R1_STATE_PRG ((uint32_t)7 << MMCSD_R1_STATE_SHIFT) /* 7=Programming state */ # define MMCSD_R1_STATE_DIS ((uint32_t)8 << MMCSD_R1_STATE_SHIFT) /* 8=Disconnect state */ #define MMCSD_R1_READYFORDATA ((uint32_t)1 << 8) /* Buffer empty */ #define MMCSD_R1_APPCMD ((uint32_t)1 << 5) /* Next CMD is ACMD */ #define MMCSD_R1_AKESEQERROR ((uint32_t)1 << 3) /* Authentication error */ #define MMCSD_R1_ERRORMASK ((uint32_t)0xfdffe008) /* Error mask */ #define IS_STATE(v,s) ((((uint32_t)v)&MMCSD_R1_STATE_MASK)==(s)) /* R3 (OCR) */ #define MMC_VDD_20_36 ((uint32_t)0x00ffff00) /* VDD voltage 2.0-3.6 */ #define MMCSD_VDD_145_150 ((uint32_t)1 << 0) /* VDD voltage 1.45 - 1.50 */ #define MMCSD_VDD_150_155 ((uint32_t)1 << 1) /* VDD voltage 1.50 - 1.55 */ #define MMCSD_VDD_155_160 ((uint32_t)1 << 2) /* VDD voltage 1.55 - 1.60 */ #define MMCSD_VDD_160_165 ((uint32_t)1 << 3) /* VDD voltage 1.60 - 1.65 */ #define MMCSD_VDD_165_170 ((uint32_t)1 << 4) /* VDD voltage 1.65 - 1.70 */ #define MMCSD_VDD_17_18 ((uint32_t)1 << 5) /* VDD voltage 1.7 - 1.8 */ #define MMCSD_VDD_18_19 ((uint32_t)1 << 6) /* VDD voltage 1.8 - 1.9 */ #define MMCSD_VDD_19_20 ((uint32_t)1 << 7) /* VDD voltage 1.9 - 2.0 */ #define MMCSD_VDD_20_21 ((uint32_t)1 << 8) /* VDD voltage 2.0-2.1 */ #define MMCSD_VDD_21_22 ((uint32_t)1 << 9) /* VDD voltage 2.1-2.2 */ #define MMCSD_VDD_22_23 ((uint32_t)1 << 10) /* VDD voltage 2.2-2.3 */ #define MMCSD_VDD_23_24 ((uint32_t)1 << 11) /* VDD voltage 2.3-2.4 */ #define MMCSD_VDD_24_25 ((uint32_t)1 << 12) /* VDD voltage 2.4-2.5 */ #define MMCSD_VDD_25_26 ((uint32_t)1 << 13) /* VDD voltage 2.5-2.6 */ #define MMCSD_VDD_26_27 ((uint32_t)1 << 14) /* VDD voltage 2.6-2.7 */ #define MMCSD_VDD_27_28 ((uint32_t)1 << 15) /* VDD voltage 2.7-2.8 */ #define MMCSD_VDD_28_29 ((uint32_t)1 << 16) /* VDD voltage 2.8-2.9 */ #define MMCSD_VDD_29_30 ((uint32_t)1 << 17) /* VDD voltage 2.9-3.0 */ #define MMCSD_VDD_30_31 ((uint32_t)1 << 18) /* VDD voltage 3.0-3.1 */ #define MMCSD_VDD_31_32 ((uint32_t)1 << 19) /* VDD voltage 3.1-3.2 */ #define MMCSD_VDD_32_33 ((uint32_t)1 << 20) /* VDD voltage 3.2-3.3 */ #define MMCSD_VDD_33_34 ((uint32_t)1 << 21) /* VDD voltage 3.3-3.4 */ #define MMCSD_VDD_34_35 ((uint32_t)1 << 22) /* VDD voltage 3.4-3.5 */ #define MMCSD_VDD_35_36 ((uint32_t)1 << 23) /* VDD voltage 3.5-3.6 */ #define MMCSD_R3_HIGHCAPACITY ((uint32_t)1 << 30) /* true: Card supports block addressing */ #define MMCSD_CARD_BUSY ((uint32_t)1 << 31) /* Card power-up busy bit */ #define MMCSD_R3_STDCAPACITY ((uint32_t)0) /* R6 Card Status bit definitions */ #define MMCSD_R6_RCA_SHIFT (16) /* New published RCA */ #define MMCSD_R6_RCA_MASK ((uint32_t)0xffff << MMCSD_R6_RCA_SHIFT) #define MMCSD_R6_COMCRCERROR ((uint32_t)1 << 15) /* CRC error */ #define MMCSD_R6_ILLEGALCOMMAND ((uint32_t)1 << 14) /* Bad command */ #define MMCSD_R6_ERROR ((uint32_t)1 << 13) /* General error */ #define MMCSD_R6_STATE_SHIFT (9) /* Current card state */ #define MMCSD_R6_STATE_MASK ((uint32_t)15 << MMCSD_R6_STATE_SHIFT) /* Card identification mode states */ # define MMCSD_R6_STATE_IDLE ((uint32_t)0 << MMCSD_R6_STATE_SHIFT) /* 0=Idle state */ # define MMCSD_R6_STATE_READY ((uint32_t)1 << MMCSD_R6_STATE_SHIFT) /* 1=Ready state */ # define MMCSD_R6_STATE_IDENT ((uint32_t)2 << MMCSD_R6_STATE_SHIFT) /* 2=Identification state */ /* Data transfer states */ # define MMCSD_R6_STATE_STBY ((uint32_t)3 << MMCSD_R6_STATE_SHIFT) /* 3=Standby state */ # define MMCSD_R6_STATE_TRAN ((uint32_t)4 << MMCSD_R6_STATE_SHIFT) /* 4=Transfer state */ # define MMCSD_R6_STATE_DATA ((uint32_t)5 << MMCSD_R6_STATE_SHIFT) /* 5=Sending data state */ # define MMCSD_R6_STATE_RCV ((uint32_t)6 << MMCSD_R6_STATE_SHIFT) /* 6=Receiving data state */ # define MMCSD_R6_STATE_PRG ((uint32_t)7 << MMCSD_R6_STATE_SHIFT) /* 7=Programming state */ # define MMCSD_R6_STATE_DIS ((uint32_t)8 << MMCSD_R6_STATE_SHIFT) /* 8=Disconnect state */ #define MMCSD_R6_ERRORMASK ((uint32_t)0x0000e000) /* Error mask */ /* SD Configuration Register (SCR) encoding */ #define MMCSD_SCR_BUSWIDTH_1BIT (1) #define MMCSD_SCR_BUSWIDTH_2BIT (2) #define MMCSD_SCR_BUSWIDTH_4BIT (4) #define MMCSD_SCR_BUSWIDTH_8BIT (8) /* Last 4 bytes of the 48-bit R7 response */ #define MMCSD_R7VERSION_SHIFT (28) /* Bits 28-31: Command version number */ #define MMCSD_R7VERSION_MASK ((uint32_t)0x0f << MMCSD_R7VERSION_SHIFT) #define MMCSD_R7VOLTAGE_SHIFT (8) /* Bits 8-11: Voltage accepted */ #define MMCSD_R7VOLTAGE_MASK ((uint32_t)0x0f << MMCSD_R7VOLTAGE_SHIFT) # define MMCSD_R7VOLTAGE_27 ((uint32_t)0x01 << MMCSD_R7VOLTAGE_SHIFT) /* 2.7-3.6V */ #define MMCSD_R7ECHO_SHIFT (0) /* Bits 0-7: Echoed check pattern */ #define MMCSD_R7ECHO_MASK ((uint32_t)0xff << MMCSD_R7ECHO_SHIFT) # define MMCSD_R7CHECKPATTERN ((uint32_t)0xaa << MMCSD_R7ECHO_SHIFT) /**************************************************************************** * Public Types ****************************************************************************/ /* Decoded Card Identification (CID) register */ struct mmcsd_cid_s { uint8_t mid; /* 127:120 8-bit Manufacturer ID */ uint16_t oid; /* 119:104 16-bit OEM/Application ID (ascii) */ uint8_t pnm[6]; /* 103:64 40-bit Product Name (ascii) + null terminator */ uint8_t prv; /* 63:56 8-bit Product revision */ uint32_t psn; /* 55:24 32-bit Product serial number */ /* 23:20 4-bit (reserved) */ uint16_t mdt; /* 19:8 12-bit Manufacturing date */ uint8_t crc; /* 7:1 7-bit CRC7 */ /* 0:0 1-bit (not used) */ }; /* Decoded Card Specific Data (CSD) register */ struct mmcsd_csd_s { uint8_t csdstructure; /* 127:126 CSD structure */ uint8_t mmcspecvers; /* 125:122 MMC Spec version (MMC only) */ struct { uint8_t timeunit; /* 2:0 Time exponent */ uint8_t timevalue; /* 6:3 Time mantissa */ } taac; /* 119:112 Data read access-time-1 */ uint8_t nsac; /* 111:104 Data read access-time-2 in CLK cycle(NSAC*100) */ struct { uint8_t transferrateunit; /* 2:0 Rate exponent */ uint8_t timevalue; /* 6:3 Rate mantissa */ } transpeed; /* 103:96 Max. data transfer rate */ uint16_t ccc; /* 95:84 Card command classes */ uint8_t readbllen; /* 83:80 Max. read data block length */ uint8_t readblpartial; /* 79:79 Partial blocks for read allowed */ uint8_t writeblkmisalign; /* 78:78 Write block misalignment */ uint8_t readblkmisalign; /* 77:77 Read block misalignment */ uint8_t dsrimp; /* 76:76 DSR implemented */ union { #ifdef CONFIG_MMCSD_MMCSUPPORT struct { uint16_t csize; /* 73:62 Device size */ uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ uint8_t csizemult; /* 49:47 Device size multiplier */ union { struct /* MMC system specification version 3.1 */ { uint8_t ergrpsize; /* 46:42 Erase group size (MMC 3.1) */ uint8_t ergrpmult; /* 41:37 Erase group multiplier (MMC 3.1) */ } mmc31; struct /* MMC system specification version 2.2 */ { uint8_t sectorsize; /* 46:42 Erase sector size (MMC 2.2) */ uint8_t ergrpsize; /* 41:37 Erase group size (MMC 2.2) */ } mmc22; } er; uint8_t mmcwpgrpsize; /* 36:32 Write protect group size (MMC) */ } mmc; #endif struct { uint16_t csize; /* 73:62 Device size */ uint8_t vddrcurrmin; /* 61:59 Max. read current at Vdd min */ uint8_t vddrcurrmax; /* 58:56 Max. read current at Vdd max */ uint8_t vddwcurrmin; /* 55:53 Max. write current at Vdd min */ uint8_t vddwcurrmax; /* 52:50 Max. write current at Vdd max */ uint8_t csizemult; /* 49:47 Device size multiplier */ uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ } sdbyte; struct { /* 73:70 (reserved) */ uint32_t csize; /* 69:48 Device size */ /* 47:47 (reserved) */ uint8_t sderblen; /* 46:46 Erase single block enable (SD) */ uint8_t sdsectorsize; /* 45:39 Erase sector size (SD) */ uint8_t sdwpgrpsize; /* 38:32 Write protect group size (SD) */ } sdblock; } u; uint8_t wpgrpen; /* 31:31 Write protect group enable */ uint8_t mmcdfltecc; /* 30:29 Manufacturer default ECC (MMC) */ uint8_t r2wfactor; /* 28:26 Write speed factor */ uint8_t writebllen; /* 25:22 Max. write data block length */ uint8_t writeblpartial; /* 21:21 Partial blocks for write allowed */ uint8_t fileformatgrp; /* 15:15 File format group */ uint8_t copy; /* 14:14 Copy flag (OTP) */ uint8_t permwriteprotect; /* 13:13 Permanent write protection */ uint8_t tmpwriteprotect; /* 12:12 Temporary write protection */ uint8_t fileformat; /* 10:11 File format */ uint8_t mmcecc; /* 9:8 ECC (MMC) */ uint8_t crc; /* 7:1 CRC */ /* 0:0 Not used */ }; struct mmcsd_scr_s { uint8_t scrversion; /* 63:60 Version of SCR structure */ uint8_t sdversion; /* 59:56 SD memory card physical layer version */ uint8_t erasestate; /* 55:55 Data state after erase (1 or 0) */ uint8_t security; /* 54:52 SD security support */ uint8_t buswidth; /* 51:48 DAT bus widths supported */ /* 47:32 SD reserved space */ uint32_t mfgdata; /* 31:0 Reserved for manufacturing data */ }; /**************************************************************************** * Public Data ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Functions Definitions ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __DRIVERS_MMCSD_MMCSD_SDIO_H */