/**************************************************************************** * sched/wdog/wd_start.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include "sched/sched.h" #include "wdog/wdog.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifndef CONFIG_SCHED_CRITMONITOR_MAXTIME_WDOG # define CONFIG_SCHED_CRITMONITOR_MAXTIME_WDOG 0 #endif #if CONFIG_SCHED_CRITMONITOR_MAXTIME_WDOG > 0 # define CALL_FUNC(func, arg) \ do \ { \ unsigned long start; \ unsigned long elapsed; \ start = up_perf_gettime(); \ func(arg); \ elapsed = up_perf_gettime() - start; \ if (elapsed > CONFIG_SCHED_CRITMONITOR_MAXTIME_WDOG) \ { \ serr("WDOG %p, %s IRQ, execute too long %lu\n", \ func, up_interrupt_context() ? "IN" : "NOT", elapsed); \ } \ } \ while (0) #else # define CALL_FUNC(func, arg) func(arg) #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: wd_expiration * * Description: * Check if the timer for the watchdog at the head of list is ready to * run. If so, remove the watchdog from the list and execute it. * * Input Parameters: * None * * Returned Value: * None * ****************************************************************************/ static inline void wd_expiration(void) { FAR struct wdog_s *wdog; wdentry_t func; /* Process the watchdog at the head of the list as well as any * other watchdogs that became ready to run at this time */ while (g_wdactivelist.head && ((FAR struct wdog_s *)g_wdactivelist.head)->lag <= 0) { /* Remove the watchdog from the head of the list */ wdog = (FAR struct wdog_s *)sq_remfirst(&g_wdactivelist); /* If there is another watchdog behind this one, update its * its lag (this shouldn't be necessary). */ if (g_wdactivelist.head) { ((FAR struct wdog_s *)g_wdactivelist.head)->lag += wdog->lag; } /* Indicate that the watchdog is no longer active. */ func = wdog->func; wdog->func = NULL; /* Execute the watchdog function */ up_setpicbase(wdog->picbase); CALL_FUNC(func, wdog->arg); } } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: wd_start * * Description: * This function adds a watchdog timer to the active timer queue. The * specified watchdog function at 'wdentry' will be called from the * interrupt level after the specified number of ticks has elapsed. * Watchdog timers may be started from the interrupt level. * * Watchdog timers execute in the address environment that was in effect * when wd_start() is called. * * Watchdog timers execute only once. * * To replace either the timeout delay or the function to be executed, * call wd_start again with the same wdog; only the most recent wdStart() * on a given watchdog ID has any effect. * * Input Parameters: * wdog - Watchdog ID * delay - Delay count in clock ticks * wdentry - Function to call on timeout * arg - Parameter to pass to wdentry * * NOTE: The parameter must be of type wdparm_t. * * Returned Value: * Zero (OK) is returned on success; a negated errno value is return to * indicate the nature of any failure. * * Assumptions: * The watchdog routine runs in the context of the timer interrupt handler * and is subject to all ISR restrictions. * ****************************************************************************/ int wd_start(FAR struct wdog_s *wdog, sclock_t delay, wdentry_t wdentry, wdparm_t arg) { FAR struct wdog_s *curr; FAR struct wdog_s *prev; FAR struct wdog_s *next; sclock_t now; irqstate_t flags; /* Verify the wdog and setup parameters */ if (wdog == NULL || wdentry == NULL || delay < 0) { return -EINVAL; } /* Check if the watchdog has been started. If so, stop it. * NOTE: There is a race condition here... the caller may receive * the watchdog between the time that wd_start is called and * the critical section is established. */ flags = enter_critical_section(); if (WDOG_ISACTIVE(wdog)) { wd_cancel(wdog); } /* Save the data in the watchdog structure */ wdog->func = wdentry; /* Function to execute when delay expires */ up_getpicbase(&wdog->picbase); wdog->arg = arg; /* Calculate delay+1, forcing the delay into a range that we can handle. * * NOTE that one is added to the delay. This is correct and must not be * changed: The contract for the use wdog_start is that the wdog will * delay FOR AT LEAST as long as requested, but may delay longer due to * variety of factors. The wdog logic has no knowledge of the the phase * of the system timer when it is started: The next timer interrupt may * occur immediately or may be delayed for almost a full cycle. In order * to meet the contract requirement, the requested time is also always * incremented by one so that the delay is always at least as long as * requested. * * There is extensive documentation about this time issue elsewhere. */ if (delay <= 0) { delay = 1; } else if (++delay <= 0) { delay--; } #ifdef CONFIG_SCHED_TICKLESS /* Cancel the interval timer that drives the timing events. This will * cause wd_timer to be called which update the delay value for the first * time at the head of the timer list (there is a possibility that it * could even remove it). */ nxsched_cancel_timer(); #endif /* Do the easy case first -- when the watchdog timer queue is empty. */ if (g_wdactivelist.head == NULL) { #ifdef CONFIG_SCHED_TICKLESS /* Update clock tickbase */ g_wdtickbase = clock_systime_ticks(); #endif /* Add the watchdog to the head == tail of the queue. */ sq_addlast((FAR sq_entry_t *)wdog, &g_wdactivelist); } /* There are other active watchdogs in the timer queue */ else { now = 0; prev = curr = (FAR struct wdog_s *)g_wdactivelist.head; /* Advance to positive time */ while ((now += curr->lag) < 0 && curr->next) { prev = curr; curr = curr->next; } /* Advance past shorter delays */ while (now <= delay && curr->next) { prev = curr; curr = curr->next; now += curr->lag; } /* Check if the new wdog must be inserted before the curr. */ if (delay < now) { /* The relative delay time is smaller or equal to the current delay * time, so decrement the current delay time by the new relative * delay time. */ delay -= (now - curr->lag); curr->lag -= delay; /* Insert the new watchdog in the list */ if (curr == (FAR struct wdog_s *)g_wdactivelist.head) { /* Insert the watchdog at the head of the list */ sq_addfirst((FAR sq_entry_t *)wdog, &g_wdactivelist); } else { /* Insert the watchdog in mid- or end-of-queue */ sq_addafter((FAR sq_entry_t *)prev, (FAR sq_entry_t *)wdog, &g_wdactivelist); } } /* The new watchdog delay time is greater than the curr delay time, * so the new wdog must be inserted after the curr. This only occurs * if the wdog is to be added to the end of the list. */ else { delay -= now; if (!curr->next) { sq_addlast((FAR sq_entry_t *)wdog, &g_wdactivelist); } else { next = curr->next; next->lag -= delay; sq_addafter((FAR sq_entry_t *)curr, (FAR sq_entry_t *)wdog, &g_wdactivelist); } } } /* Put the lag into the watchdog structure and mark it as active. */ wdog->lag = delay; #ifdef CONFIG_SCHED_TICKLESS /* Resume the interval timer that will generate the next interval event. * If the timer at the head of the list changed, then this will pick that * new delay. */ nxsched_resume_timer(); #endif leave_critical_section(flags); return OK; } /**************************************************************************** * Name: wd_timer * * Description: * This function is called from the timer interrupt handler to determine * if it is time to execute a watchdog function. If so, the watchdog * function will be executed in the context of the timer interrupt * handler. * * Input Parameters: * ticks - If CONFIG_SCHED_TICKLESS is defined then the number of ticks * in the interval that just expired is provided. Otherwise, * this function is called on each timer interrupt and a value of one * is implicit. * noswitches - True: Can't do context switches now. * * Returned Value: * If CONFIG_SCHED_TICKLESS is defined then the number of ticks for the * next delay is provided (zero if no delay). Otherwise, this function * has no returned value. * * Assumptions: * Called from interrupt handler logic with interrupts disabled. * ****************************************************************************/ #ifdef CONFIG_SCHED_TICKLESS unsigned int wd_timer(int ticks, bool noswitches) { FAR struct wdog_s *wdog; unsigned int ret; int decr; /* Check if there are any active watchdogs to process */ wdog = (FAR struct wdog_s *)g_wdactivelist.head; while (wdog != NULL && ticks > 0) { /* Decrement the lag for this watchdog. */ decr = MIN(wdog->lag, ticks); /* There are. Decrement the lag counter */ wdog->lag -= decr; ticks -= decr; g_wdtickbase += decr; wdog = wdog->next; } /* Check if the watchdog at the head of the list is ready to run */ if (!noswitches) { wd_expiration(); } /* Update clock tickbase */ g_wdtickbase += ticks; /* Return the delay for the next watchdog to expire */ ret = g_wdactivelist.head ? MAX(((FAR struct wdog_s *)g_wdactivelist.head)->lag, 1) : 0; /* Return the delay for the next watchdog to expire */ return ret; } #else void wd_timer(void) { /* Check if there are any active watchdogs to process */ if (g_wdactivelist.head) { /* There are. Decrement the lag counter */ --(((FAR struct wdog_s *)g_wdactivelist.head)->lag); /* Check if the watchdog at the head of the list is ready to run */ wd_expiration(); } } #endif /* CONFIG_SCHED_TICKLESS */