/**************************************************************************** * drivers/lcd/memlcd.c * Driver for Sharp Memory LCD. * * Copyright (C) 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * Librae * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior writen permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration */ /* Cisplay resolution */ #if defined CONFIG_MEMLCD_LS013B7DH01 # define MEMLCD_XRES 144 # define MEMLCD_YRES 168 #elif defined CONFIG_MEMLCD_LS013B7DH03 # define MEMLCD_XRES 128 # define MEMLCD_YRES 128 #else # error "This Memory LCD model is not supported yet." #endif /* lcd command */ #define MEMLCD_CMD_UPDATE (0x01) #define MEMLCD_CMD_ALL_CLEAR (0x04) #define MEMLCD_CONTROL_BYTES (0) /* Dolor depth and format */ #define MEMLCD_BPP 1 #define MEMLCD_COLORFMT FB_FMT_Y1 /* Bytes per logical row and column */ #define MEMLCD_XSTRIDE (MEMLCD_XRES >> 3) #define MEMLCD_YSTRIDE (MEMLCD_YRES >> 3) /* display memory allocation */ #define MEMLCD_FBSIZE (MEMLCD_XSTRIDE*MEMLCD_YRES) /* contrast setting, related to VCOM toggle frequency * higher frequency gives better contrast, instead, saves power */ #define MEMLCD_CONTRAST 24 #define MEMLCD_MAXCONTRAST 60 #define MEMLCD_MINCONTRAST 1 /* Other misc settings */ #define MEMLCD_SPI_FREQUENCY 2250000 #define MEMLCD_SPI_BITS (-8) #define MEMLCD_SPI_MODE SPIDEV_MODE0 #define LS_BIT (1 << 0) #define MS_BIT (1 << 7) /* Debug */ #ifdef CONFIG_DEBUG_LCD # define lcderr(format, ...) err(format, ##__VA_ARGS__) # define lcdwarn(format, ...) warn(format, ##__VA_ARGS__) # define lcdinfo(format, ...) info(format, ##__VA_ARGS__) #else # define lcderr(x...) # define lcdwarn(x...) # define lcdinfo(x...) #endif /**************************************************************************** * Private Type Definition ****************************************************************************/ struct memlcd_dev_s { /* Publically visible device structure */ struct lcd_dev_s dev; /* Private lcd-specific information follows */ FAR struct spi_dev_s *spi; /* Cached SPI device reference */ FAR struct memlcd_priv_s *priv; /* Board specific structure */ uint8_t contrast; /* Current contrast setting */ uint8_t power; /* Current power setting */ /* The memlcds does not support reading the display memory in SPI mode. * Since there is 1 BPP and is byte access, it is necessary to keep a * shadow copy of the framebuffer. At 128x128, it amounts to 2KB. */ uint8_t fb[MEMLCD_FBSIZE]; }; /**************************************************************************** * Private Function Protototypes ****************************************************************************/ /* Low-level spi helpers */ static void memlcd_select(FAR struct spi_dev_s *spi); static void memlcd_deselect(FAR struct spi_dev_s *spi); /* lcd data transfer methods */ static int memlcd_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t * buffer, size_t npixels); static int memlcd_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t * buffer, size_t npixels); /* lcd configuration */ static int memlcd_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo); static int memlcd_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo); /* lcd specific controls */ static int memlcd_getpower(struct lcd_dev_s *dev); static int memlcd_setpower(struct lcd_dev_s *dev, int power); static int memlcd_getcontrast(struct lcd_dev_s *dev); static int memlcd_setcontrast(struct lcd_dev_s *dev, unsigned int contrast); /**************************************************************************** * Private Data ****************************************************************************/ static uint8_t g_runbuffer[MEMLCD_BPP * MEMLCD_XRES / 8]; /* This structure describes the overall lcd video controller */ static const struct fb_videoinfo_s g_videoinfo = { .fmt = MEMLCD_COLORFMT, /* Color format: rgb16-565: rrrr rggg gggb bbbb */ .xres = MEMLCD_XRES, /* Horizontal resolution in pixel columns */ .yres = MEMLCD_YRES, /* Vertical resolution in pixel rows */ .nplanes = 1, /* Number of color planes supported */ }; /* This is the standard, nuttx plane information object */ static const struct lcd_planeinfo_s g_planeinfo = { .putrun = memlcd_putrun, /* Put a run into lcd memory */ .getrun = memlcd_getrun, /* Get a run from lcd memory */ .buffer = (uint8_t *) g_runbuffer, /* Run scratch buffer */ .bpp = MEMLCD_BPP, /* Bits-per-pixel */ }; /* This is the oled driver instance (only a single device is supported for now) */ static struct memlcd_dev_s g_memlcddev = { .dev = { /* lcd configuration */ .getvideoinfo = memlcd_getvideoinfo, .getplaneinfo = memlcd_getplaneinfo, /* lcd specific controls */ .getpower = memlcd_getpower, .setpower = memlcd_setpower, .getcontrast = memlcd_getcontrast, .setcontrast = memlcd_setcontrast, }, }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * __set_bit - Set a bit in memory * * @nr: the bit to set * @addr: the address to start counting from * * Unlike set_bit(), this function is non-atomic and may be reordered. * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. * ****************************************************************************/ #define BIT(nr) (1 << (nr)) #define BITS_PER_BYTE 8 #define BIT_MASK(nr) (1 << ((nr) % BITS_PER_BYTE)) #define BIT_BYTE(nr) ((nr) / BITS_PER_BYTE) static inline void __set_bit(int nr, uint8_t * addr) { uint8_t mask = BIT_MASK(nr); uint8_t *p = ((uint8_t *) addr) + BIT_BYTE(nr); *p |= mask; } static inline void __clear_bit(int nr, uint8_t * addr) { uint8_t mask = BIT_MASK(nr); uint8_t *p = ((uint8_t *) addr) + BIT_BYTE(nr); *p &= ~mask; } static inline int __test_bit(int nr, const volatile uint8_t * addr) { return 1 & (addr[BIT_BYTE(nr)] >> (nr & (BITS_PER_BYTE - 1))); } /**************************************************************************** * Name: memlcd_select * * Description: * Select the SPI, locking and re-configuring if necessary * * Input Parameters: * spi - Reference to the SPI driver structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static void memlcd_select(FAR struct spi_dev_s *spi) { /* Select memlcd (locking the SPI bus in case there are multiple * devices competing for the SPI bus */ SPI_LOCK(spi, true); SPI_SELECT(spi, SPIDEV_DISPLAY, true); /* Now make sure that the SPI bus is configured for the memlcd (it * might have gotten configured for a different device while unlocked) */ SPI_SETMODE(spi, MEMLCD_SPI_MODE); SPI_SETBITS(spi, MEMLCD_SPI_BITS); (void)SPI_HWFEATURES(spi, 0); # ifdef CONFIG_MEMLCD_SPI_FREQUENCY (void)SPI_SETFREQUENCY(spi, CONFIG_MEMLCD_SPI_FREQUENCY); # else (void)SPI_SETFREQUENCY(spi, MEMLCD_SPI_FREQUENCY); # endif } /**************************************************************************** * Name: memlcd_deselect * * Description: * De-select the SPI * * Input Parameters: * spi - Reference to the SPI driver structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static void memlcd_deselect(FAR struct spi_dev_s *spi) { /* De-select memlcd and relinquish the spi bus. */ SPI_SELECT(spi, SPIDEV_DISPLAY, false); SPI_LOCK(spi, false); } /**************************************************************************** * Name: memlcd_clear * * Description: * This method can be used to clear the entire display. * * Input Parameters: * mlcd - Reference to private driver structure * * Assumptions: * ****************************************************************************/ static inline void memlcd_clear(FAR struct memlcd_dev_s *mlcd) { uint16_t cmd = MEMLCD_CMD_ALL_CLEAR; lcdinfo("Clear display\n"); memlcd_select(mlcd->spi); /* XXX Ensure 2us here */ SPI_SNDBLOCK(mlcd->spi, &cmd, 2); /* XXX Ensure 6us here */ memlcd_deselect(mlcd->spi); } /**************************************************************************** * Name: memlcd_extcominisr * * Description: * This method enables/disables the polarity (VCOM) toggling behavior for * the Memory LCD. Which is always used within setpower() call. * Basically, the frequency shall be 1Hz~60Hz. * If use hardware mode to toggle VCOM, we need to send specific command at a * constant frequency to trigger the LCD intenal hardware logic. * While use software mode, we set up a timer to toggle EXTCOMIN connected IO, * basically, it is a hardware timer to ensure a constant frequency. * * Input Parameters: * mlcd - Reference to private driver structure * * Assumptions: * Board specific logic needs to be provided to support it. * ****************************************************************************/ static int memlcd_extcominisr(int irq, FAR void *context) { static bool pol = 0; struct memlcd_dev_s *mlcd = &g_memlcddev; #ifdef CONFIG_MEMLCD_EXTCOMIN_MODE_HW # error "CONFIG_MEMLCD_EXTCOMIN_MODE_HW unsupported yet!" /* Start a worker thread, do it in bottom half? */ #else pol = !pol; mlcd->priv->setpolarity(pol); #endif return OK; } /**************************************************************************** * Name: memlcd_putrun * * Description: * This method can be used to write a partial raster line to the LCD. * * Input Parameters: * row - Starting row to write to (range: 0 <= row < yres) * col - Starting column to write to (range: 0 <= col <= xres-npixels) * buffer - The buffer containing the run to be writen to the LCD * npixels - The number of pixels to write to the LCD * (range: 0 < npixels <= xres-col) * ****************************************************************************/ static int memlcd_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t * buffer, size_t npixels) { FAR struct memlcd_dev_s *mlcd = (FAR struct memlcd_dev_s *)&g_memlcddev; uint16_t cmd; uint8_t *p; uint8_t *pfb; uint8_t usrmask; int i; DEBUGASSERT(buffer); lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels); #ifdef CONFIG_NX_PACKEDMSFIRST usrmask = MS_BIT; #else usrmask = LS_BIT; #endif pfb = &mlcd->fb[row * MEMLCD_XSTRIDE]; p = pfb + (col >> 3); for (i = 0; i < npixels; i++) { if ((*buffer & usrmask) != 0) { __set_bit(col % 8 + i, p); } else { __clear_bit(col % 8 + i, p); } #ifdef CONFIG_NX_PACKEDMSFIRST if (usrmask == LS_BIT) { buffer++; usrmask = MS_BIT; } else { usrmask >>= 1; } #else if (usrmask == MS_BIT) { buffer++; usrmask = LS_BIT; } else { usrmask <<= 1; } #endif } /* Need to adjust start row by one because Memory LCD starts counting * lines from 1, while the display interface starts from 0. */ row++; memlcd_select(mlcd->spi); /* XXX Ensure 6us here */ cmd = MEMLCD_CMD_UPDATE | row << 8; SPI_SNDBLOCK(mlcd->spi, &cmd, 2); SPI_SNDBLOCK(mlcd->spi, pfb, MEMLCD_YRES / 8 + MEMLCD_CONTROL_BYTES); cmd = 0xffff; SPI_SNDBLOCK(mlcd->spi, &cmd, 2); /* XXX Ensure 2us here */ memlcd_deselect(mlcd->spi); return OK; } /**************************************************************************** * Name: memlcd_getrun * * Description: * This method can be used to read a partial raster line from the LCD. * * row - Starting row to read from (range: 0 <= row < yres) * col - Starting column to read read (range: 0 <= col <= xres-npixels) * buffer - The buffer in which to return the run read from the LCD * npixels - The number of pixels to read from the LCD * (range: 0 < npixels <= xres-col) * ****************************************************************************/ static int memlcd_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t * buffer, size_t npixels) { FAR struct memlcd_dev_s *mlcd = (FAR struct memlcd_dev_s *)&g_memlcddev; uint8_t *p; uint8_t *pfb; uint8_t usrmask; int i; DEBUGASSERT(buffer); lcdinfo("row: %d col: %d npixels: %d\n", row, col, npixels); #ifdef CONFIG_NX_PACKEDMSFIRST usrmask = MS_BIT; #else usrmask = LS_BIT; #endif pfb = &mlcd->fb[row * MEMLCD_XSTRIDE]; p = pfb + (col >> 3); for (i = 0; i < npixels; i++) { if (__test_bit(col % 8 + i, p)) { *buffer |= usrmask; } else { *buffer &= ~usrmask; } #ifdef CONFIG_NX_PACKEDMSFIRST if (usrmask == LS_BIT) { buffer++; usrmask = MS_BIT; } else { usrmask >>= 1; } #else if (usrmask == MS_BIT) { buffer++; usrmask = LS_BIT; } else { usrmask <<= 1; } #endif } return OK; } /**************************************************************************** * Name: memlcd_getvideoinfo * * Description: * Get information about the LCD video controller configuration. * ****************************************************************************/ static int memlcd_getvideoinfo(FAR struct lcd_dev_s *dev, FAR struct fb_videoinfo_s *vinfo) { DEBUGASSERT(dev && vinfo); lcdinfo("fmt: %d xres: %d yres: %d nplanes: %d\n", g_videoinfo.fmt, g_videoinfo.xres, g_videoinfo.yres, g_videoinfo.nplanes); memcpy(vinfo, &g_videoinfo, sizeof(struct fb_videoinfo_s)); return OK; } /**************************************************************************** * Name: memlcd_getplaneinfo * * Description: * Get information about the configuration of each LCD color plane. * ****************************************************************************/ static int memlcd_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, FAR struct lcd_planeinfo_s *pinfo) { DEBUGASSERT(pinfo && planeno == 0); lcdinfo("planeno: %d bpp: %d\n", planeno, g_planeinfo.bpp); memcpy(pinfo, &g_planeinfo, sizeof(struct lcd_planeinfo_s)); return OK; } /**************************************************************************** * Name: memlcd_getpower * * Description: * Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER: full on. * On backlit LCDs, this setting may correspond to the backlight setting. * ****************************************************************************/ static int memlcd_getpower(FAR struct lcd_dev_s *dev) { FAR struct memlcd_dev_s *mlcd = (FAR struct memlcd_dev_s *)dev; DEBUGASSERT(mlcd); lcdinfo("%d\n", mlcd->power); return mlcd->power; } /**************************************************************************** * Name: memlcd_setpower * * Description: * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). * On backlit LCDs, this setting may correspond to the backlight setting. * ****************************************************************************/ static int memlcd_setpower(FAR struct lcd_dev_s *dev, int power) { struct memlcd_dev_s *mlcd = (struct memlcd_dev_s *)dev; DEBUGASSERT(mlcd && (unsigned)power <= CONFIG_LCD_MAXPOWER && mlcd->spi); lcdinfo("%d\n", power); mlcd->power = power; if (power > 0) { mlcd->priv->dispcontrol(1); memlcd_clear(mlcd); } else { mlcd->priv->dispcontrol(0); } return OK; } /**************************************************************************** * Name: memlcd_getcontrast * * Description: * Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST). * ****************************************************************************/ static int memlcd_getcontrast(struct lcd_dev_s *dev) { struct memlcd_dev_s *mlcd = (struct memlcd_dev_s *)dev; DEBUGASSERT(mlcd); lcdinfo("contrast: %d\n", mlcd->contrast); return mlcd->contrast; } /**************************************************************************** * Name: memlcd_setcontrast * * Description: * Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST). * ****************************************************************************/ static int memlcd_setcontrast(struct lcd_dev_s *dev, unsigned int contrast) { struct memlcd_dev_s *mlcd = (struct memlcd_dev_s *)dev; DEBUGASSERT(mlcd); lcdinfo("contrast: %d\n", contrast); if (contrast > MEMLCD_MAXCONTRAST) { contrast = MEMLCD_MAXCONTRAST; } if (contrast < MEMLCD_MINCONTRAST) { contrast = MEMLCD_MINCONTRAST; } mlcd->contrast = contrast; mlcd->priv->setvcomfreq(contrast); return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: memlcd_initialize * * Description: * Initialize the Sharp Memory LCD hardware. The initial state of the * OLED is fully initialized, display memory cleared, and the OLED ready * to use, but with the power setting at 0 (full off == sleep mode). * * Input Parameters: * * spi - A reference to the SPI driver instance. * devno - A value in the range of 0 through CONFIG_memlcd_NINTERFACES-1. * This allows support for multiple OLED devices. * * Returned Value: * * On success, this function returns a reference to the LCD object for * the specified LCD. NULL is returned on any failure. * ****************************************************************************/ FAR struct lcd_dev_s *memlcd_initialize(FAR struct spi_dev_s *spi, FAR struct memlcd_priv_s *priv, unsigned int devno) { FAR struct memlcd_dev_s *mlcd = &g_memlcddev; DEBUGASSERT(spi && priv && devno == 0); /* Register board specific functions */ mlcd->priv = priv; mlcd->spi = spi; mlcd->priv->attachirq(memlcd_extcominisr); lcdinfo("done\n"); return &mlcd->dev; }