/****************************************************************************
 * boards/arm/sam34/sam4s-xplained/src/sam_sram.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <debug.h>

#include "arm_internal.h"
#include "sam4s_periphclks.h"
#include "hardware/sam_smc.h"
#include "sam4s-xplained.h"

#ifdef CONFIG_SAM34_EXTSRAM0

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

#define NPINS (3+8+19+1)

/****************************************************************************
 * Private Data
 ****************************************************************************/

static const gpio_pinset_t g_srampins[NPINS] =
{
  GPIO_SMC_NCS0, GPIO_SMC_NRD, GPIO_SMC_NWE,

  GPIO_SMC_D0,   GPIO_SMC_D1,  GPIO_SMC_D2,  GPIO_SMC_D3,
  GPIO_SMC_D4,   GPIO_SMC_D5,  GPIO_SMC_D6,  GPIO_SMC_D7,

  GPIO_SMC_A0,   GPIO_SMC_A1,  GPIO_SMC_A2,  GPIO_SMC_A3,
  GPIO_SMC_A4,   GPIO_SMC_A5,  GPIO_SMC_A6,  GPIO_SMC_A7,
  GPIO_SMC_A8,   GPIO_SMC_A9,  GPIO_SMC_A10, GPIO_SMC_A11,
  GPIO_SMC_A12,  GPIO_SMC_A13, GPIO_SMC_A14, GPIO_SMC_A15,
  GPIO_SMC_A16,  GPIO_SMC_A17, GPIO_SMC_A18,

  GPIO_EBI_NLB
};

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: sam_sram_initialize
 *
 * Description:
 *   Configure and enable SRAM on board the SAM4S Xplained
 *
 ****************************************************************************/

void sam_sram_initialize(void)
{
  int i;

  /* Configure GPIO pins (leaving SRAM in the disabled state) */

  for (i = 0; i < NPINS; i++)
    {
      sam_configgpio(g_srampins[i]);
    }

  /* Enable PMC clock to the SMC */

  sam_smc_enableclk();

  /* Configure SMC setup timing */

  putreg32(SMCCS_SETUP_NWESETUP(1) | SMCCS_SETUP_NCSWRSETUP(1) |
           SMCCS_SETUP_NRDSETUP(1) | SMCCS_SETUP_NCSRDSETUP(1),
           SAM_SMCCS0_SETUP);

  /* Configure the SMC pulse timing */

  putreg32(SMCCS_PULSE_NWEPULSE(6) | SMCCS_PULSE_NCSWRPULSE(6) |
           SMCCS_PULSE_NRDPULSE(6) | SMCCS_PULSE_NCSRDPULSE(6),
           SAM_SMCCS0_PULSE);

  /* Configure the SMC cycle timing */

  putreg32(SMCCS_CYCLE_NWECYCLE(7) | SMCCS_CYCLE_NRDCYCLE(7),
           SAM_SMCCS0_CYCLE);

  /* Configure the SMC mode */

  putreg32(SMCCS_MODE_READMODE | SMCCS_MODE_WRITEMODE, SAM_SMCCS0_MODE);

  /* Enable SRAM access (active low) */

  sam_gpiowrite(GPIO_EBI_NLB, false);
}

#endif /* CONFIG_SAM34_EXTSRAM0 */