/**************************************************************************** * net/nat/ipv4_nat.c * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. The * ASF licenses this file to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance with the * License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the * License for the specific language governing permissions and limitations * under the License. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include "nat/nat.h" #include "utils/utils.h" #if defined(CONFIG_NET_NAT) && defined(CONFIG_NET_IPv4) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Adjust checksums in headers. */ #define chksum_adjust(chksum,optr,nptr,len) \ net_chksum_adjust((FAR uint16_t *)(chksum), (FAR uint16_t *)(optr), len, \ (FAR uint16_t *)(nptr), len) /* Getting IP & Port to manipulate from L3/L4 header. */ #define MANIP_IPADDR(iphdr,manip_type) \ ((manip_type) == NAT_MANIP_SRC ? (iphdr)->srcipaddr : (iphdr)->destipaddr) #define MANIP_PORT(l4hdr,manip_type) \ ((manip_type) == NAT_MANIP_SRC ? &(l4hdr)->srcport : &(l4hdr)->destport) /* Getting L4 header from IPv4 header. */ #define L4_HDR(ipv4) \ (FAR void *)((FAR uint8_t *)(ipv4) + (((ipv4)->vhl & IPv4_HLMASK) << 2)) #if defined(CONFIG_NET_TCP) # define L4_MAXHDRLEN TCP_HDRLEN #elif defined(CONFIG_NET_UDP) # define L4_MAXHDRLEN UDP_HDRLEN #elif defined(CONFIG_NET_ICMP) # define L4_MAXHDRLEN ICMP_HDRLEN #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static FAR struct ipv4_nat_entry * ipv4_nat_inbound_internal(FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type); static FAR struct ipv4_nat_entry * ipv4_nat_outbound_internal(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type); /**************************************************************************** * Inline Functions ****************************************************************************/ /**************************************************************************** * Name: ipv4_nat_l4_hdrlen * * Description: * Get L4 header length * ****************************************************************************/ static inline uint8_t ipv4_nat_l4_hdrlen(uint8_t proto) { switch (proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: return TCP_HDRLEN; #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: return UDP_HDRLEN; #endif #ifdef CONFIG_NET_ICMP case IP_PROTO_ICMP: return ICMP_HDRLEN; #endif default: nwarn("WARNING: Unsupported protocol %u inside ICMP\n", proto); } return 0; } /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: ipv4_nat_ip_adjust * * Description: * Adjust address and checksum for network packet. * * Input Parameters: * ipv4 - Points to the IPv4 header to adjust. * l4chksum - Points to the L4 checksum to adjust, NULL for not adjust. * new_ip - The IP to set into header. * manip_type - Whether manipulate source ip or destination ip. * ****************************************************************************/ static void ipv4_nat_ip_adjust(FAR struct ipv4_hdr_s *ipv4, FAR uint16_t *l4chksum, in_addr_t new_ip, enum nat_manip_type_e manip_type) { FAR uint16_t *old_ip = MANIP_IPADDR(ipv4, manip_type); if (l4chksum != NULL) { chksum_adjust(l4chksum, old_ip, &new_ip, sizeof(new_ip)); } chksum_adjust(&ipv4->ipchksum, old_ip, &new_ip, sizeof(new_ip)); net_ipv4addr_hdrcopy(old_ip, &new_ip); } /**************************************************************************** * Name: ipv4_nat_port_adjust * * Description: * Adjust port and checksum for network packet. * * Input Parameters: * l4chksum - Points to the L4 checksum to adjust, NULL for not adjust. * old_port - The port to be set. * new_port - The port to set into header. * ****************************************************************************/ static void ipv4_nat_port_adjust(FAR uint16_t *l4chksum, FAR uint16_t *old_port, uint16_t new_port) { if (l4chksum != NULL) { chksum_adjust(l4chksum, old_port, &new_port, sizeof(new_port)); } *old_port = new_port; } /**************************************************************************** * Name: ipv4_nat_inbound_tcp * * Description: * Check if a received TCP packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ #ifdef CONFIG_NET_TCP static FAR struct ipv4_nat_entry * ipv4_nat_inbound_tcp(FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct tcp_hdr_s *tcp = L4_HDR(ipv4); FAR uint16_t *external_ip = MANIP_IPADDR(ipv4, manip_type); FAR uint16_t *external_port = MANIP_PORT(tcp, manip_type); FAR struct ipv4_nat_entry *entry = ipv4_nat_inbound_entry_find(IP_PROTO_TCP, net_ip4addr_conv32(external_ip), *external_port, true); if (!entry) { return NULL; } /* Note: Field tcpchksum is not guaranteed exists in TCP header inside * ICMP Error MSG, but we manually guarantee that it is inside valid memory * address (IOB >= IP + ICMP + IP + TCP), so we can update it safely. */ ipv4_nat_port_adjust(&tcp->tcpchksum, external_port, entry->local_port); ipv4_nat_ip_adjust(ipv4, &tcp->tcpchksum, entry->local_ip, manip_type); return entry; } #endif /**************************************************************************** * Name: ipv4_nat_inbound_udp * * Description: * Check if a received UDP packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ #ifdef CONFIG_NET_UDP static FAR struct ipv4_nat_entry * ipv4_nat_inbound_udp(FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct udp_hdr_s *udp = L4_HDR(ipv4); FAR uint16_t *external_ip = MANIP_IPADDR(ipv4, manip_type); FAR uint16_t *external_port = MANIP_PORT(udp, manip_type); FAR uint16_t *udpchksum; FAR struct ipv4_nat_entry *entry = ipv4_nat_inbound_entry_find(IP_PROTO_UDP, net_ip4addr_conv32(external_ip), *external_port, true); if (!entry) { return NULL; } /* UDP checksum has special case 0 (no checksum) */ udpchksum = udp->udpchksum != 0 ? &udp->udpchksum : NULL; ipv4_nat_port_adjust(udpchksum, external_port, entry->local_port); ipv4_nat_ip_adjust(ipv4, udpchksum, entry->local_ip, manip_type); return entry; } #endif /**************************************************************************** * Name: ipv4_nat_inbound_icmp * * Description: * Check if a received ICMP packet belongs to a NAT entry. If so, translate * the external IP/ID to local IP/ID. * * Input Parameters: * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether external IP is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on g_dev and is targeting at the address assigned to * g_dev. * ****************************************************************************/ #ifdef CONFIG_NET_ICMP static FAR struct ipv4_nat_entry * ipv4_nat_inbound_icmp(FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct icmp_hdr_s *icmp = L4_HDR(ipv4); FAR uint16_t *external_ip; FAR struct ipv4_nat_entry *entry; switch (icmp->type) { case ICMP_ECHO_REQUEST: case ICMP_ECHO_REPLY: external_ip = MANIP_IPADDR(ipv4, manip_type); entry = ipv4_nat_inbound_entry_find(IP_PROTO_ICMP, net_ip4addr_conv32(external_ip), icmp->id, true); if (!entry) { return NULL; } ipv4_nat_port_adjust(&icmp->icmpchksum, &icmp->id, entry->local_port); ipv4_nat_ip_adjust(ipv4, NULL, entry->local_ip, manip_type); return entry; case ICMP_DEST_UNREACHABLE: case ICMP_TIME_EXCEEDED: case ICMP_PARAMETER_PROBLEM: /* ICMP Error MSG inside another ICMP Error MSG is forbidden by * RFC1122, Section 3.2.2, Page 38, so we only process the outermost * ICMP Error MSG (manip type is DST). */ if (manip_type == NAT_MANIP_DST) { /* The payload in the ICMP packet is the origin packet we sent. */ FAR struct ipv4_hdr_s *inner = (FAR struct ipv4_hdr_s *)(icmp + 1); FAR void *inner_l4; uint16_t outer_l3len = (ipv4->len[0] << 8) + ipv4->len[1]; int16_t inner_l4len; int16_t inner_l4hdrlen; uint16_t inner_l4hdrbak[L4_MAXHDRLEN]; /* Make sure we have a full inner IPv4 header. */ if (outer_l3len < (uintptr_t)(inner + 1) - (uintptr_t)ipv4) { return NULL; } inner_l4 = L4_HDR(inner); inner_l4len = (intptr_t)ipv4 + outer_l3len - (intptr_t)inner_l4; inner_l4hdrlen = ipv4_nat_l4_hdrlen(inner->proto); inner_l4hdrlen = MIN(inner_l4len, inner_l4hdrlen); if (inner_l4hdrlen < 8) { /* RFC792: The original L4 data should be at least 64 bits. */ return NULL; } /* Try backup origin L4 header for later checksum update. */ DEBUGASSERT((intptr_t)inner_l4 - (intptr_t)ipv4 + inner_l4hdrlen <= CONFIG_IOB_BUFSIZE); memcpy(inner_l4hdrbak, inner_l4, inner_l4hdrlen); /* Find entry and translate inner. */ entry = ipv4_nat_inbound_internal(inner, NAT_MANIP_SRC); if (!entry) { return NULL; } /* Adjust outer IP */ ipv4_nat_ip_adjust(ipv4, NULL, entry->local_ip, manip_type); /* Recalculate ICMP checksum, we only need to re-calc data in L4 * header, because the inner IPv4 header's checksum is updated, * and the overall checksum of IPv4 header will not change. */ chksum_adjust(&icmp->icmpchksum, inner_l4hdrbak, inner_l4, inner_l4hdrlen); return entry; } } return NULL; } #endif /**************************************************************************** * Name: ipv4_nat_outbound_tcp * * Description: * Check if we want to perform NAT with this outbound TCP packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_TCP static FAR struct ipv4_nat_entry * ipv4_nat_outbound_tcp(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct tcp_hdr_s *tcp = L4_HDR(ipv4); FAR uint16_t *local_ip = MANIP_IPADDR(ipv4, manip_type); FAR uint16_t *local_port = MANIP_PORT(tcp, manip_type); FAR struct ipv4_nat_entry *entry; /* Only create entry when it's the outermost packet (manip type is SRC). */ entry = ipv4_nat_outbound_entry_find(dev, IP_PROTO_TCP, net_ip4addr_conv32(local_ip), *local_port, (manip_type == NAT_MANIP_SRC)); if (!entry) { return NULL; } /* Note: Field tcpchksum is not guaranteed exists in TCP header inside * ICMP Error MSG, but we manually guarantee that it is inside valid memory * address (IOB >= IP + ICMP + IP + TCP), so we can update it safely. */ ipv4_nat_port_adjust(&tcp->tcpchksum, local_port, entry->external_port); ipv4_nat_ip_adjust(ipv4, &tcp->tcpchksum, entry->external_ip, manip_type); return entry; } #endif /**************************************************************************** * Name: ipv4_nat_outbound_udp * * Description: * Check if we want to perform NAT with this outbound UDP packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_UDP static FAR struct ipv4_nat_entry * ipv4_nat_outbound_udp(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct udp_hdr_s *udp = L4_HDR(ipv4); FAR uint16_t *local_ip = MANIP_IPADDR(ipv4, manip_type); FAR uint16_t *local_port = MANIP_PORT(udp, manip_type); FAR uint16_t *udpchksum; FAR struct ipv4_nat_entry *entry; /* Only create entry when it's the outermost packet (manip type is SRC). */ entry = ipv4_nat_outbound_entry_find(dev, IP_PROTO_UDP, net_ip4addr_conv32(local_ip), *local_port, (manip_type == NAT_MANIP_SRC)); if (!entry) { return NULL; } /* UDP checksum has special case 0 (no checksum) */ udpchksum = udp->udpchksum != 0 ? &udp->udpchksum : NULL; ipv4_nat_port_adjust(udpchksum, local_port, entry->external_port); ipv4_nat_ip_adjust(ipv4, udpchksum, entry->external_ip, manip_type); return entry; } #endif /**************************************************************************** * Name: ipv4_nat_outbound_icmp * * Description: * Check if we want to perform NAT with this outbound ICMP packet before * sending it. If so, translate the local IP/ID to external IP/ID. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether local IP is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ #ifdef CONFIG_NET_ICMP static FAR struct ipv4_nat_entry * ipv4_nat_outbound_icmp(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { FAR struct icmp_hdr_s *icmp = L4_HDR(ipv4); FAR uint16_t *local_ip = MANIP_IPADDR(ipv4, manip_type); FAR struct ipv4_nat_entry *entry; switch (icmp->type) { case ICMP_ECHO_REQUEST: case ICMP_ECHO_REPLY: /* Note: Only create new entry when it's the outermost packet (that * is, manip type is SRC). */ entry = ipv4_nat_outbound_entry_find(dev, IP_PROTO_ICMP, net_ip4addr_conv32(local_ip), icmp->id, (manip_type == NAT_MANIP_SRC)); if (!entry) { return NULL; } ipv4_nat_port_adjust(&icmp->icmpchksum, &icmp->id, entry->external_port); ipv4_nat_ip_adjust(ipv4, NULL, entry->external_ip, manip_type); return entry; case ICMP_DEST_UNREACHABLE: case ICMP_TIME_EXCEEDED: case ICMP_PARAMETER_PROBLEM: /* ICMP Error MSG inside another ICMP Error MSG is forbidden by * RFC1122, Section 3.2.2, Page 38, so we only process the outermost * ICMP Error MSG (manip type is SRC). */ if (manip_type == NAT_MANIP_SRC) { /* The payload in the ICMP packet is the origin packet we got. */ FAR struct ipv4_hdr_s *inner = (FAR struct ipv4_hdr_s *)(icmp + 1); FAR void *inner_l4; uint16_t outer_l3len = (ipv4->len[0] << 8) + ipv4->len[1]; int16_t inner_l4len; int16_t inner_l4hdrlen; uint16_t inner_l4hdrbak[L4_MAXHDRLEN]; /* Make sure we have a full inner IPv4 header. */ if (outer_l3len < (uintptr_t)(inner + 1) - (uintptr_t)ipv4) { return NULL; } inner_l4 = L4_HDR(inner); inner_l4len = (intptr_t)ipv4 + outer_l3len - (intptr_t)inner_l4; inner_l4hdrlen = ipv4_nat_l4_hdrlen(inner->proto); inner_l4hdrlen = MIN(inner_l4len, inner_l4hdrlen); if (inner_l4hdrlen < 8) { /* RFC792: The original L4 data should be at least 64 bits. */ return NULL; } /* Try backup origin L4 header for later checksum update. */ DEBUGASSERT((intptr_t)inner_l4 - (intptr_t)ipv4 + inner_l4hdrlen <= CONFIG_IOB_BUFSIZE); memcpy(inner_l4hdrbak, inner_l4, inner_l4hdrlen); /* Find entry and translate inner. */ entry = ipv4_nat_outbound_internal(dev, inner, NAT_MANIP_DST); if (!entry) { return NULL; } /* Adjust outer IP */ ipv4_nat_ip_adjust(ipv4, NULL, entry->external_ip, manip_type); /* Recalculate ICMP checksum, we only need to re-calc data in L4 * header, because the inner IPv4 header's checksum is updated, * and the overall checksum of IPv4 header will not change. */ chksum_adjust(&icmp->icmpchksum, inner_l4hdrbak, inner_l4, inner_l4hdrlen); return entry; } } return NULL; } #endif /**************************************************************************** * Name: ipv4_nat_inbound_internal * * Description: * Check if a received packet belongs to a NAT entry. If so, translate * the external IP/Port to local IP/Port. * * Input Parameters: * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether external IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet is received on NAT device and is targeting at the address * assigned to the device. * ****************************************************************************/ static FAR struct ipv4_nat_entry * ipv4_nat_inbound_internal(FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { switch (ipv4->proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: return ipv4_nat_inbound_tcp(ipv4, manip_type); #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: return ipv4_nat_inbound_udp(ipv4, manip_type); #endif #ifdef CONFIG_NET_ICMP case IP_PROTO_ICMP: return ipv4_nat_inbound_icmp(ipv4, manip_type); #endif } return NULL; } /**************************************************************************** * Name: ipv4_nat_outbound_internal * * Description: * Check if we want to perform NAT with this outbound packet before * sending it. If so, translate the local IP/Port to external IP/Port. * * Input Parameters: * dev - The device to sent the packet (to get external IP). * ipv4 - Points to the IPv4 header to translate. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * The corresponding NAT entry of the packet. * * Assumptions: * Packet will be sent on NAT device. * ****************************************************************************/ static FAR struct ipv4_nat_entry * ipv4_nat_outbound_internal(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { switch (ipv4->proto) { #ifdef CONFIG_NET_TCP case IP_PROTO_TCP: return ipv4_nat_outbound_tcp(dev, ipv4, manip_type); #endif #ifdef CONFIG_NET_UDP case IP_PROTO_UDP: return ipv4_nat_outbound_udp(dev, ipv4, manip_type); #endif #ifdef CONFIG_NET_ICMP case IP_PROTO_ICMP: return ipv4_nat_outbound_icmp(dev, ipv4, manip_type); #endif } return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: ipv4_nat_enable * * Description: * Enable NAT function on a network device. * * Input Parameters: * dev - The device on which the outbound packets will be masqueraded. * * Returned Value: * Zero is returned if NAT function is successfully enabled on the device; * A negated errno value is returned if failed. * ****************************************************************************/ int ipv4_nat_enable(FAR struct net_driver_s *dev) { net_lock(); if (IFF_IS_NAT(dev->d_flags)) { nwarn("WARNING: NAT was already enabled for %s!\n", dev->d_ifname); net_unlock(); return -EEXIST; } IFF_SET_NAT(dev->d_flags); net_unlock(); return OK; } /**************************************************************************** * Name: ipv4_nat_disable * * Description: * Disable NAT function on a network device. * * Input Parameters: * dev - The device on which the NAT function will be disabled. * * Returned Value: * Zero is returned if NAT function is successfully disabled on the device; * A negated errno value is returned if failed. * ****************************************************************************/ int ipv4_nat_disable(FAR struct net_driver_s *dev) { net_lock(); if (!IFF_IS_NAT(dev->d_flags)) { nwarn("WARNING: NAT was not enabled for %s!\n", dev->d_ifname); net_unlock(); return -ENODEV; } /* Clear entries related to dev. */ ipv4_nat_entry_clear(dev); IFF_CLR_NAT(dev->d_flags); net_unlock(); return OK; } /**************************************************************************** * Name: ipv4_nat_inbound * * Description: * Check if a received packet belongs to a NAT entry. If so, translate it. * * Input Parameters: * dev - The device on which the packet is received. * ipv4 - Points to the IPv4 header with dev->d_buf. * * Returned Value: * Zero is returned if NAT is successfully applied, or is not enabled for * this packet; * A negated errno value is returned if error occured. * ****************************************************************************/ int ipv4_nat_inbound(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4) { /* We only process packets from NAT device and targeting at the address * assigned to the device. */ if (IFF_IS_NAT(dev->d_flags) && net_ipv4addr_hdrcmp(ipv4->destipaddr, &dev->d_ipaddr)) { FAR struct ipv4_nat_entry *entry = ipv4_nat_inbound_internal(ipv4, NAT_MANIP_DST); if (!entry) { /* Inbound without entry is OK (e.g. towards NuttX itself), skip. */ return OK; } } return OK; } /**************************************************************************** * Name: ipv4_nat_outbound * * Description: * Check if we want to perform NAT with this outbound packet before sending * it. If so, translate it. * * Input Parameters: * dev - The device on which the packet will be sent. * ipv4 - Points to the IPv4 header to be filled into dev->d_buf later. * manip_type - Whether local IP/Port is in source or destination. * * Returned Value: * Zero is returned if NAT is successfully applied, or is not enabled for * this packet; * A negated errno value is returned if error occured. * ****************************************************************************/ int ipv4_nat_outbound(FAR struct net_driver_s *dev, FAR struct ipv4_hdr_s *ipv4, enum nat_manip_type_e manip_type) { /* We only process packets targeting at NAT device but not targeting at the * address assigned to the device. */ if (IFF_IS_NAT(dev->d_flags) && !net_ipv4addr_hdrcmp(ipv4->srcipaddr, &dev->d_ipaddr) && !net_ipv4addr_hdrcmp(ipv4->destipaddr, &dev->d_ipaddr)) { /* TODO: Skip broadcast? */ FAR struct ipv4_nat_entry *entry = ipv4_nat_outbound_internal(dev, ipv4, manip_type); if (manip_type == NAT_MANIP_SRC && !entry) { /* Outbound entry creation failed, should have entry. */ return -ENOMEM; } } return OK; } /**************************************************************************** * Name: ipv4_nat_port_inuse * * Description: * Check whether a port is currently used by NAT. * * Input Parameters: * protocol - The L4 protocol of the packet. * ip - The IP bind with the port (in network byte order). * port - The port number to check (in network byte order). * * Returned Value: * True if the port is already used by NAT, otherwise false. * ****************************************************************************/ bool ipv4_nat_port_inuse(uint8_t protocol, in_addr_t ip, uint16_t port) { FAR struct ipv4_nat_entry *entry = ipv4_nat_inbound_entry_find(protocol, ip, port, false); return entry != NULL; } #endif /* CONFIG_NET_NAT && CONFIG_NET_IPv4 */