/**************************************************************************** * drivers/net/tun.c * * Copyright (C) 2015-2016 Max Nekludov. All rights reserved. * Author: Max Nekludov * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_NET_PKT # include #endif #include #include #include #include #include #include #include #include #if defined(CONFIG_NET) && defined(CONFIG_NET_TUN) /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* If processing is not done at the interrupt level, then high priority * work queue support is required. */ #if !defined(CONFIG_SCHED_WORKQUEUE) # error Work queue support is required in this configuration (CONFIG_SCHED_WORKQUEUE) #endif /* The low priority work queue is preferred. If it is not enabled, LPWORK * will be the same as HPWORK. * * NOTE: However, the network should NEVER run on the high priority work * queue! That queue is intended only to service short back end interrupt * processing that never suspends. Suspending the high priority work queue * may bring the system to its knees! */ #define TUNWORK LPWORK /* CONFIG_TUN_NINTERFACES determines the number of physical interfaces * that will be supported. */ #ifndef CONFIG_TUN_NINTERFACES # define CONFIG_TUN_NINTERFACES 1 #endif /* Make sure that packet buffers include in configured guard size and are an * even multiple of 16-bits in length. */ #define NET_TUN_PKTSIZE ((CONFIG_NET_TUN_PKTSIZE + CONFIG_NET_GUARDSIZE + 1) & ~1) /* This is a helper pointer for accessing the contents of the Ethernet * header. */ #ifdef CONFIG_NET_ETHERNET # define BUF ((FAR struct eth_hdr_s *)priv->dev.d_buf) #endif /**************************************************************************** * Private Types ****************************************************************************/ /* The tun_device_s encapsulates all state information for a single hardware * interface */ struct tun_device_s { bool bifup; /* true:ifup false:ifdown */ bool read_wait; bool write_wait; struct work_s work; /* For deferring poll work to the work queue */ FAR struct pollfd *poll_fds; mutex_t lock; sem_t read_wait_sem; sem_t write_wait_sem; size_t read_d_len; size_t write_d_len; /* These packet buffer arrays required 16-bit alignment. That alignment * is assured only by the preceding wide data types. */ uint8_t read_buf[NET_TUN_PKTSIZE]; uint8_t write_buf[NET_TUN_PKTSIZE]; /* This holds the information visible to the NuttX network */ struct net_driver_s dev; /* Interface understood by the network */ }; struct tun_driver_s { mutex_t lock; uint8_t free_tuns; }; /**************************************************************************** * Private Function Prototypes ****************************************************************************/ /* Common TX logic */ static void tun_fd_transmit(FAR struct tun_device_s *priv); static int tun_txpoll(FAR struct net_driver_s *dev); #ifdef CONFIG_NET_ETHERNET static int tun_txpoll_tap(FAR struct net_driver_s *dev); #endif static int tun_txpoll_tun(FAR struct net_driver_s *dev); /* Interrupt handling */ static void tun_net_receive(FAR struct tun_device_s *priv); #ifdef CONFIG_NET_ETHERNET static void tun_net_receive_tap(FAR struct tun_device_s *priv); #endif static void tun_net_receive_tun(FAR struct tun_device_s *priv); static void tun_txdone(FAR struct tun_device_s *priv); /* NuttX callback functions */ static int tun_ifup(FAR struct net_driver_s *dev); static int tun_ifdown(FAR struct net_driver_s *dev); static int tun_txavail(FAR struct net_driver_s *dev); #ifdef CONFIG_NET_MCASTGROUP static int tun_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); static int tun_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac); #endif static int tun_dev_init(FAR struct tun_device_s *priv, FAR struct file *filep, FAR const char *devfmt, bool tun); static void tun_dev_uninit(FAR struct tun_device_s *priv); /* File interface */ static int tun_close(FAR struct file *filep); static ssize_t tun_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t tun_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int tun_ioctl(FAR struct file *filep, int cmd, unsigned long arg); static int tun_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup); /**************************************************************************** * Private Data ****************************************************************************/ static struct tun_driver_s g_tun = { NXMUTEX_INITIALIZER, }; static struct tun_device_s g_tun_devices[CONFIG_TUN_NINTERFACES]; static const struct file_operations g_tun_file_ops = { NULL, /* open */ tun_close, /* close */ tun_read, /* read */ tun_write, /* write */ NULL, /* seek */ tun_ioctl, /* ioctl */ tun_poll /* poll */ #ifndef CONFIG_DISABLE_PSEUDOFS_OPERATIONS , NULL /* unlink */ #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: tun_pollnotify ****************************************************************************/ static void tun_pollnotify(FAR struct tun_device_s *priv, pollevent_t eventset) { FAR struct pollfd *fds = priv->poll_fds; if (priv->read_wait && (eventset & POLLIN)) { priv->read_wait = false; nxsem_post(&priv->read_wait_sem); } if (priv->write_wait && (eventset & POLLOUT)) { priv->write_wait = false; nxsem_post(&priv->write_wait_sem); } if (fds == NULL) { return; } poll_notify(&fds, 1, eventset); } /**************************************************************************** * Name: tun_fd_transmit * * Description: * Start hardware transmission. Called either from the txdone interrupt * handling or from watchdog based polling. * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ static void tun_fd_transmit(FAR struct tun_device_s *priv) { NETDEV_TXPACKETS(&priv->dev); tun_pollnotify(priv, POLLIN); } /**************************************************************************** * Name: tun_txpoll * * Description: * The transmitter is available, check if the network has any outgoing * packets ready to send. This is a callback from devif_poll(). * devif_poll() may be called: * * 1. When the preceding TX packet send is complete, * 2. When the preceding TX packet send timesout and the interface is reset * 3. During normal TX polling * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ static int tun_txpoll(FAR struct net_driver_s *dev) { int ret; #ifdef CONFIG_NET_ETHERNET if (dev->d_lltype == NET_LL_ETHERNET) { ret = tun_txpoll_tap(dev); } else #endif { ret = tun_txpoll_tun(dev); } return ret; } /**************************************************************************** * Name: tun_txpoll_tap : for tap (ethernet bridge) mode * * Description: * The transmitter is available, check if the network has any outgoing * packets ready to send. This is a callback from devif_poll(). * devif_poll() may be called: * * 1. When the preceding TX packet send is complete, * 2. When the preceding TX packet send timesout and the interface is reset * 3. During normal TX polling * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ #ifdef CONFIG_NET_ETHERNET static int tun_txpoll_tap(FAR struct net_driver_s *dev) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)dev->d_private; /* Send the packet */ priv->read_d_len = priv->dev.d_len; tun_fd_transmit(priv); return 1; } #endif /**************************************************************************** * Name: tun_txpoll_tun : for tun (IP tunneling) mode * * Description: * The transmitter is available, check if the network has any outgoing * packets ready to send. This is a callback from devif_poll(). * devif_poll() may be called: * * 1. When the preceding TX packet send is complete, * 2. When the preceding TX packet send timesout and the interface is reset * 3. During normal TX polling * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * OK on success; a negated errno on failure * * Assumptions: * May or may not be called from an interrupt handler. In either case, * global interrupts are disabled, either explicitly or indirectly through * interrupt handling logic. * ****************************************************************************/ static int tun_txpoll_tun(FAR struct net_driver_s *dev) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)dev->d_private; priv->read_d_len = priv->dev.d_len; tun_fd_transmit(priv); return 1; } /**************************************************************************** * Name: tun_net_receive * * Description: * An interrupt was received indicating the availability of a new RX * packet * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by interrupt handling logic. * ****************************************************************************/ static void tun_net_receive(FAR struct tun_device_s *priv) { #ifdef CONFIG_NET_ETHERNET if (priv->dev.d_lltype == NET_LL_ETHERNET) { tun_net_receive_tap(priv); } else #endif { tun_net_receive_tun(priv); } } /**************************************************************************** * Name: tun_net_receive_tap : for tap (ethernet bridge) mode * * Description: * An interrupt was received indicating the availability of a new RX packet * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by interrupt handling logic. * ****************************************************************************/ #ifdef CONFIG_NET_ETHERNET static void tun_net_receive_tap(FAR struct tun_device_s *priv) { /* Copy the data data from the hardware to priv->dev.d_buf. Set amount of * data in priv->dev.d_len */ NETDEV_RXPACKETS(&priv->dev); #ifdef CONFIG_NET_PKT /* When packet sockets are enabled, feed the frame into the tap */ pkt_input(&priv->dev); #endif /* We only accept IP packets of the configured type and ARP packets */ #if defined(CONFIG_NET_IPv4) if (BUF->type == HTONS(ETHTYPE_IP)) { ninfo("IPv4 frame\n"); NETDEV_RXIPV4(&priv->dev); /* Receive an IPv4 packet from the network device */ ipv4_input(&priv->dev); } else #endif #ifdef CONFIG_NET_IPv6 if (BUF->type == HTONS(ETHTYPE_IP6)) { ninfo("IPv6 frame\n"); NETDEV_RXIPV6(&priv->dev); /* Give the IPv6 packet to the network layer. */ ipv6_input(&priv->dev); } else #endif #ifdef CONFIG_NET_ARP if (BUF->type == HTONS(ETHTYPE_ARP)) { arp_arpin(&priv->dev); NETDEV_RXARP(&priv->dev); /* If the above function invocation resulted in data that should be * sent out on the network, the field d_len will set to a value > 0. */ if (priv->dev.d_len > 0) { priv->write_d_len = priv->dev.d_len; tun_fd_transmit(priv); priv->dev.d_len = 0; } } else #endif { NETDEV_RXDROPPED(&priv->dev); priv->dev.d_len = 0; } /* If the above function invocation resulted in data that should be * sent out on the network, the field d_len will set to a value > 0. */ if (priv->dev.d_len > 0) { /* And send the packet */ priv->write_d_len = priv->dev.d_len; tun_fd_transmit(priv); } } #endif /**************************************************************************** * Name: tun_net_receive_tun : for tun (IP tunneling) mode * * Description: * An interrupt was received indicating the availability of a new RX * packet * * Input Parameters: * priv - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by interrupt handling logic. * ****************************************************************************/ static void tun_net_receive_tun(FAR struct tun_device_s *priv) { FAR struct net_driver_s *dev = &priv->dev; /* Copy the data data from the hardware to dev->d_buf. Set amount of * data in dev->d_len */ NETDEV_RXPACKETS(dev); #ifdef CONFIG_NET_PKT /* When packet sockets are enabled, feed the frame into the tap */ pkt_input(dev); #endif /* We only accept IP packets of the configured type */ #if defined(CONFIG_NET_IPv4) if ((IPv4BUF->vhl & IP_VERSION_MASK) == IPv4_VERSION) { ninfo("IPv4 frame\n"); NETDEV_RXIPV4(dev); /* Give the IPv4 packet to the network layer. */ ipv4_input(dev); } else #endif #if defined(CONFIG_NET_IPv6) if ((IPv6BUF->vtc & IP_VERSION_MASK) == IPv6_VERSION) { ninfo("IPv6 frame\n"); NETDEV_RXIPV6(dev); /* Give the IPv6 packet to the network layer. */ ipv6_input(dev); } else #endif { NETDEV_RXDROPPED(dev); dev->d_len = 0; } /* If the above function invocation resulted in data that should be * sent out on the network, d_len field will set to a value > 0. */ if (dev->d_len > 0) { priv->write_d_len = dev->d_len; tun_fd_transmit(priv); } } /**************************************************************************** * Name: tun_txdone * * Description: * An interrupt was received indicating that the last TX packet(s) is done * * Input Parameters: * dev - Reference to the driver state structure * * Returned Value: * None * * Assumptions: * Global interrupts are disabled by the watchdog logic. * ****************************************************************************/ static void tun_txdone(FAR struct tun_device_s *priv) { /* Check for errors and update statistics */ NETDEV_TXDONE(&priv->dev); /* Then poll the network for new XMIT data */ priv->dev.d_buf = priv->read_buf; devif_poll(&priv->dev, tun_txpoll); } /**************************************************************************** * Name: tun_ifup * * Description: * NuttX Callback: Bring up the Ethernet interface when an IP address is * provided * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int tun_ifup(FAR struct net_driver_s *dev) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)dev->d_private; #ifdef CONFIG_NET_IPv4 ninfo("Bringing up: %d.%d.%d.%d\n", (int)(dev->d_ipaddr & 0xff), (int)((dev->d_ipaddr >> 8) & 0xff), (int)((dev->d_ipaddr >> 16) & 0xff), (int)(dev->d_ipaddr >> 24)); #endif #ifdef CONFIG_NET_IPv6 ninfo("Bringing up: %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", dev->d_ipv6addr[0], dev->d_ipv6addr[1], dev->d_ipv6addr[2], dev->d_ipv6addr[3], dev->d_ipv6addr[4], dev->d_ipv6addr[5], dev->d_ipv6addr[6], dev->d_ipv6addr[7]); #endif priv->bifup = true; netdev_carrier_on(dev); return OK; } /**************************************************************************** * Name: tun_ifdown * * Description: * NuttX Callback: Stop the interface. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * ****************************************************************************/ static int tun_ifdown(FAR struct net_driver_s *dev) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)dev->d_private; irqstate_t flags; netdev_carrier_off(dev); flags = enter_critical_section(); /* Mark the device "down" */ priv->bifup = false; leave_critical_section(flags); return OK; } /**************************************************************************** * Name: tun_txavail_work * * Description: * Driver callback invoked when new TX data is available. This is a * stimulus perform an out-of-cycle poll and, thereby, reduce the TX * latency. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * Called in normal user mode * ****************************************************************************/ static void tun_txavail_work(FAR void *arg) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)arg; int ret; ret = nxmutex_lock(&priv->lock); if (ret < 0) { /* Thread has been canceled, skip poll-related work */ return; } /* Check if there is room to hold another network packet. */ if (priv->read_d_len != 0) { nxmutex_unlock(&priv->lock); return; } net_lock(); if (priv->bifup) { /* Poll the network for new XMIT data */ priv->dev.d_buf = priv->read_buf; devif_poll(&priv->dev, tun_txpoll); } net_unlock(); nxmutex_unlock(&priv->lock); } /**************************************************************************** * Name: tun_txavail * * Description: * Driver callback invoked when new TX data is available. This is a * stimulus perform an out-of-cycle poll and, thereby, reduce the TX * latency. * * Input Parameters: * dev - Reference to the NuttX driver state structure * * Returned Value: * None * * Assumptions: * Called from the network stack with the network locked. * ****************************************************************************/ static int tun_txavail(FAR struct net_driver_s *dev) { FAR struct tun_device_s *priv = (FAR struct tun_device_s *)dev->d_private; /* Schedule to perform the TX poll on the worker thread. */ if (work_available(&priv->work)) { work_queue(TUNWORK, &priv->work, tun_txavail_work, priv, 0); } return OK; } /**************************************************************************** * Name: tun_addmac * * Description: * NuttX Callback: Add the specified MAC address to the hardware multicast * address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be added * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_MCASTGROUP static int tun_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { /* Add the MAC address to the hardware multicast routing table */ return OK; } #endif /**************************************************************************** * Name: tun_rmmac * * Description: * NuttX Callback: Remove the specified MAC address from the hardware * multicast address filtering * * Input Parameters: * dev - Reference to the NuttX driver state structure * mac - The MAC address to be removed * * Returned Value: * None * * Assumptions: * ****************************************************************************/ #ifdef CONFIG_NET_MCASTGROUP static int tun_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac) { /* Add the MAC address to the hardware multicast routing table */ return OK; } #endif /**************************************************************************** * Name: tun_dev_init * * Description: * Initialize the TUN device * * Input Parameters: * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * ****************************************************************************/ static int tun_dev_init(FAR struct tun_device_s *priv, FAR struct file *filep, FAR const char *devfmt, bool tun) { int ret; /* Initialize the driver structure */ memset(priv, 0, sizeof(struct tun_device_s)); priv->dev.d_ifup = tun_ifup; /* I/F up (new IP address) callback */ priv->dev.d_ifdown = tun_ifdown; /* I/F down callback */ priv->dev.d_txavail = tun_txavail; /* New TX data callback */ #ifdef CONFIG_NET_MCASTGROUP priv->dev.d_addmac = tun_addmac; /* Add multicast MAC address */ priv->dev.d_rmmac = tun_rmmac; /* Remove multicast MAC address */ #endif priv->dev.d_private = priv; /* Used to recover private state from dev */ /* Initialize the mutual exlcusion and wait semaphore */ nxmutex_init(&priv->lock); nxsem_init(&priv->read_wait_sem, 0, 0); nxsem_init(&priv->write_wait_sem, 0, 0); /* Assign d_ifname if specified. */ if (devfmt) { strlcpy(priv->dev.d_ifname, devfmt, IFNAMSIZ); } /* Register the device with the OS so that socket IOCTLs can be performed */ ret = netdev_register(&priv->dev, tun ? NET_LL_TUN : NET_LL_ETHERNET); if (ret != OK) { nxmutex_destroy(&priv->lock); nxsem_destroy(&priv->read_wait_sem); nxsem_destroy(&priv->write_wait_sem); return ret; } filep->f_priv = priv; /* Set link to TUN device */ return ret; } /**************************************************************************** * Name: tun_dev_uninit ****************************************************************************/ static void tun_dev_uninit(FAR struct tun_device_s *priv) { /* Put the interface in the down state */ tun_ifdown(&priv->dev); /* Remove the device from the OS */ netdev_unregister(&priv->dev); nxmutex_destroy(&priv->lock); nxsem_destroy(&priv->read_wait_sem); nxsem_destroy(&priv->write_wait_sem); } /**************************************************************************** * Name: tun_close ****************************************************************************/ static int tun_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR struct tun_driver_s *tun = inode->i_private; FAR struct tun_device_s *priv = filep->f_priv; int intf; int ret; if (priv == NULL) { return OK; } intf = priv - g_tun_devices; ret = nxmutex_lock(&tun->lock); if (ret >= 0) { tun->free_tuns |= (1 << intf); tun_dev_uninit(priv); nxmutex_unlock(&tun->lock); } return ret; } /**************************************************************************** * Name: tun_write ****************************************************************************/ static ssize_t tun_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { FAR struct tun_device_s *priv = filep->f_priv; ssize_t nwritten = 0; int ret; if (priv == NULL || buflen > CONFIG_NET_TUN_PKTSIZE) { return -EINVAL; } for (; ; ) { /* Write must return immediately if interrupted by a signal (or if the * thread is canceled) and no data has yet been written. */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return nwritten == 0 ? (ssize_t)ret : nwritten; } /* Check if there are free space to write */ if (priv->write_d_len == 0) { memcpy(priv->write_buf, buffer, buflen); net_lock(); priv->dev.d_buf = priv->write_buf; priv->dev.d_len = buflen; tun_net_receive(priv); net_unlock(); nwritten = buflen; break; } /* Wait if there are no free space to write */ if ((filep->f_oflags & O_NONBLOCK) != 0) { nwritten = -EAGAIN; break; } priv->write_wait = true; nxmutex_unlock(&priv->lock); nxsem_wait(&priv->write_wait_sem); } nxmutex_unlock(&priv->lock); return nwritten; } /**************************************************************************** * Name: tun_read ****************************************************************************/ static ssize_t tun_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct tun_device_s *priv = filep->f_priv; ssize_t nread = 0; int ret; if (priv == NULL) { return -EINVAL; } for (; ; ) { /* Read must return immediately if interrupted by a signal (or if the * thread is canceled) and no data has yet been read. */ ret = nxmutex_lock(&priv->lock); if (ret < 0) { return nread == 0 ? (ssize_t)ret : nread; } /* Check if there are data to read in write buffer */ if (priv->write_d_len > 0) { if (buflen < priv->write_d_len) { nread = -EINVAL; break; } memcpy(buffer, priv->write_buf, priv->write_d_len); nread = priv->write_d_len; priv->write_d_len = 0; NETDEV_TXDONE(&priv->dev); tun_pollnotify(priv, POLLOUT); break; } /* Check if there are data to read in read buffer */ if (priv->read_d_len > 0) { if (buflen < priv->read_d_len) { nread = -EINVAL; break; } memcpy(buffer, priv->read_buf, priv->read_d_len); nread = priv->read_d_len; priv->read_d_len = 0; net_lock(); tun_txdone(priv); net_unlock(); break; } /* Wait if there are no data to read */ if ((filep->f_oflags & O_NONBLOCK) != 0) { nread = -EAGAIN; break; } priv->read_wait = true; nxmutex_unlock(&priv->lock); nxsem_wait(&priv->read_wait_sem); } nxmutex_unlock(&priv->lock); return nread; } /**************************************************************************** * Name: tun_poll ****************************************************************************/ int tun_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct tun_device_s *priv = filep->f_priv; pollevent_t eventset; int ret; /* Some sanity checking */ if (priv == NULL || fds == NULL) { return -EINVAL; } ret = nxmutex_lock(&priv->lock); if (ret < 0) { return ret; } if (setup) { if (priv->poll_fds) { ret = -EBUSY; goto errout; } priv->poll_fds = fds; eventset = 0; /* If write buffer is empty notify App. */ if (priv->write_d_len == 0) { eventset |= POLLOUT; } /* The write buffer sometimes could be used for TX. * So check it too. */ if (priv->read_d_len != 0 || priv->write_d_len != 0) { eventset |= POLLIN; } tun_pollnotify(priv, eventset); } else { priv->poll_fds = 0; } errout: nxmutex_unlock(&priv->lock); return ret; } /**************************************************************************** * Name: tun_ioctl ****************************************************************************/ static int tun_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR struct tun_driver_s *tun = inode->i_private; FAR struct tun_device_s *priv = filep->f_priv; int ret = OK; if (cmd == TUNSETIFF && priv == NULL) { uint8_t free_tuns; int intf; FAR struct ifreq *ifr = (FAR struct ifreq *)arg; if (ifr == NULL || ((ifr->ifr_flags & IFF_MASK) != IFF_TUN && (ifr->ifr_flags & IFF_MASK) != IFF_TAP)) { return -EINVAL; } ret = nxmutex_lock(&tun->lock); if (ret < 0) { return ret; } free_tuns = tun->free_tuns; if (free_tuns == 0) { nxmutex_unlock(&tun->lock); return -ENOMEM; } for (intf = 0; intf < CONFIG_TUN_NINTERFACES && !(free_tuns & 1); intf++, free_tuns >>= 1); ret = tun_dev_init(&g_tun_devices[intf], filep, *ifr->ifr_name ? ifr->ifr_name : 0, (ifr->ifr_flags & IFF_MASK) == IFF_TUN); if (ret != OK) { nxmutex_unlock(&tun->lock); return ret; } tun->free_tuns &= ~(1 << intf); priv = filep->f_priv; strlcpy(ifr->ifr_name, priv->dev.d_ifname, IFNAMSIZ); nxmutex_unlock(&tun->lock); return OK; } return -ENOTTY; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: tun_initialize * * Description: * Instantiate a TUN network interface. * * Input Parameters: * * Returned Value: * OK on success; Negated errno on failure. * * Assumptions: * ****************************************************************************/ int tun_initialize(void) { g_tun.free_tuns = (1 << CONFIG_TUN_NINTERFACES) - 1; register_driver("/dev/tun", &g_tun_file_ops, 0644, &g_tun); return OK; } #endif /* CONFIG_NET && CONFIG_NET_TUN */