/**************************************************************************** * graphics/nxbe/nxbe.h * * Copyright (C) 2008 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __GRAPHICS_NXBE_NXBE_H #define __GRAPHICS_NXBE_NXBE_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include /**************************************************************************** * Pre-Processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef CONFIG_NX_NPLANES # define CONFIG_NX_NPLANES 1 /* Max number of color planes supported */ #endif #ifndef CONFIG_NX_NCOLORS # define CONFIG_NX_NCOLORS 256 #endif /* These are the values for the clipping order provided to nx_clipper */ #define NX_CLIPORDER_TLRB (0) /* Top-left-right-bottom */ #define NX_CLIPORDER_TRLB (1) /* Top-right-left-bottom */ #define NX_CLIPORDER_BLRT (2) /* Bottom-left-right-top */ #define NX_CLIPORDER_BRLT (3) /* Bottom-right-left-top */ #define NX_CLIPORDER_DEFAULT NX_CLIPORDER_TLRB /**************************************************************************** * Public Types ****************************************************************************/ /* Rasterization ************************************************************/ /* A tiny vtable of raster operation function pointers. The types of the * function points must match the rasterizer types exported by nxglib */ struct nxbe_plane_s { /* Raster operation callbacks for this bits-per-pixel value */ void (*fillrectangle)(FAR struct fb_planeinfo_s *pinfo, FAR const struct nxgl_rect_s *rect, nxgl_mxpixel_t color); void (*filltrapezoid)(FAR struct fb_planeinfo_s *pinfo, FAR const struct nxgl_trapezoid_s *trap, FAR const struct nxgl_rect_s *bounds, nxgl_mxpixel_t color); void (*moverectangle)(FAR struct fb_planeinfo_s *pinfo, FAR const struct nxgl_rect_s *rect, FAR struct nxgl_point_s *offset); void (*copyrectangle)(FAR struct fb_planeinfo_s *pinfo, FAR const struct nxgl_rect_s *dest, FAR const void *src, FAR const struct nxgl_point_s *origin, unsigned int srcstride); /* Framebuffer plane info describing destination video plane */ struct fb_planeinfo_s pinfo; }; /* Clipping *****************************************************************/ /* Clipping callback functions called nxbe_clipper for each visible and * obscured region of a rectangle within a window. */ struct nxbe_clipops_s { void (*visible)(FAR struct nxbe_clipops_s *cops, FAR struct nxbe_plane_s *plane, FAR const struct nxgl_rect_s *rect); void (*obscured)(FAR struct nxbe_clipops_s *cops, FAR struct nxbe_plane_s *plane, FAR const struct nxgl_rect_s *rect); }; /* Windows ******************************************************************/ /* This structure represents one window. */ struct nxbe_state_s; struct nxfe_conn_s; struct nxbe_window_s { /* State information */ FAR struct nxbe_state_s *be; /* The back-end state structure */ #ifdef CONFIG_NX_MULTIUSER FAR struct nxfe_conn_s *conn; /* Connection to the window client */ #endif FAR const struct nx_callback_s *cb; /* Event handling callbacks */ /* The following links provide the window's vertical position using a * singly linked list. */ FAR struct nxbe_window_s *above; /* The window "above" this window */ FAR struct nxbe_window_s *below; /* The window "below this one */ /* Window geometry */ struct nxgl_rect_s bounds; /* The bounding rectangle of window */ struct nxgl_point_s origin; /* The position of the top-left corner of the window */ /* Client state information this is provide in window callbacks */ FAR void *arg; }; /* Back-end state ***********************************************************/ /* This structure describes the overall back-end window state */ struct nxbe_state_s { /* The window list (with the background window always at the bottom) */ FAR struct nxbe_window_s *topwnd; /* The window at the top of the display */ struct nxbe_window_s bkgd; /* The background window is always at the bottom */ /* At present, only a solid colored background is supported for refills. The * following provides the background color. It would be nice to support * background bitmap images as well. */ nxgl_mxpixel_t bgcolor[CONFIG_NX_NPLANES]; /* vinfo describes the video controller and plane[n].pinfo describes color * plane 'n' supported by the video controller. Most common color models * fit in one plane, but this array provides future support for hardware * with planar YUV types with 3 or 4 color planes. */ struct fb_videoinfo_s vinfo; /* Rasterizing functions selected to match the BPP reported in pinfo[] */ struct nxbe_plane_s plane[CONFIG_NX_NPLANES]; }; /**************************************************************************** * Public Data ****************************************************************************/ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxbe_colormap * * Description: * Set the harware color map to the palette expected by NX * ****************************************************************************/ #if CONFIG_FB_CMAP EXTERN int nxbe_colormap(FAR struct fb_vtable_s *fb); #endif /**************************************************************************** * Name: nx_fbconfigure * * Description: * Configure the back end state structure based on information from the * framebuffer driver * ****************************************************************************/ EXTERN int nxbe_fbconfigure(FAR struct fb_vtable_s *fb, FAR struct nxbe_state_s *be); /**************************************************************************** * Name: nxbe_closewindow * * Description: * Close an existing window * * Input Parameters: * wnd - The window to be closed (and deallocated) * * Return: * None * ****************************************************************************/ EXTERN void nxbe_closewindow(struct nxbe_window_s *wnd); /**************************************************************************** * Name: nxbe_setposition * * Descripton: * This function checks for intersections and redraws the display after * a change in the position of a window. * ****************************************************************************/ EXTERN void nxbe_setposition(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_point_s *pos); /**************************************************************************** * Name: nxbe_setsize * * Descripton: * This function checks for intersections and redraws the display after * a change in the size of a window. * ****************************************************************************/ EXTERN void nxbe_setsize(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *size); /**************************************************************************** * Name: nxbe_raise * * Description: * Bring the specified window to the top of the display. * ****************************************************************************/ EXTERN void nxbe_raise(FAR struct nxbe_window_s *wnd); /**************************************************************************** * Name: nxbe_lower * * Description: * Lower the specified window to the bottom of the display. * ****************************************************************************/ EXTERN void nxbe_lower(FAR struct nxbe_window_s *wnd); /**************************************************************************** * Name: nxbe_fill * * Description: * Fill the specified rectangle in the window with the specified color * * Input Parameters: * wnd - The window structure reference * rect - The location to be filled * col - The color to use in the fill * * Return: * None * ****************************************************************************/ EXTERN void nxbe_fill(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *rect, nxgl_mxpixel_t color[CONFIG_NX_NPLANES]); /**************************************************************************** * Name: nxbe_filltrapezoid * * Description: * Fill the specified rectangle in the window with the specified color * * Input Parameters: * wnd - The window structure reference * rect - The location to be filled * col - The color to use in the fill * * Return: * None * ****************************************************************************/ EXTERN void nxbe_filltrapezoid(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_trapezoid_s *trap, nxgl_mxpixel_t color[CONFIG_NX_NPLANES]); /**************************************************************************** * Name: nxbe_move * * Description: * Move a rectangular region within the window * * Input Parameters: * wnd - The window within which the move is to be done * rect - Describes the rectangular region to move * offset - The offset to move the region * * Return: * None * ****************************************************************************/ EXTERN void nxbe_move(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *rect, FAR const struct nxgl_point_s *offset); /**************************************************************************** * Name: nxbe_bitmap * * Description: * Copy a rectangular region of a larger image into the rectangle in the * specified window. * * Input Parameters: * wnd - The window that will receive the bitmap image * dest - Describes the rectangular on the display that will receive the * the bit map. * src - The start of the source image. * origin - The origin of the upper, left-most corner of the full bitmap. * Both dest and origin are in window coordinates, however, origin * may lie outside of the display. * stride - The width of the full source image in pixels. * * Return: * OK on success; ERROR on failure with errno set appropriately * ****************************************************************************/ EXTERN void nxbe_bitmap(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *dest, FAR const void *src[CONFIG_NX_NPLANES], FAR const struct nxgl_point_s *origin, unsigned int stride); /**************************************************************************** * Name: nxbe_redraw * * Descripton: * Re-draw the visible portions of the rectangular region for the * specified window * ****************************************************************************/ EXTERN void nxbe_redraw(FAR struct nxbe_state_s *be, FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *rect); /**************************************************************************** * Name: nxbe_redrawbelow * * Descripton: * Re-draw the visible portions of the rectangular region for all windows * below (and including) the specified window. This function is called * whenever a window is closed, moved, lowered or re-sized in order to * expose newly visible portions of lower windows. * ****************************************************************************/ EXTERN void nxbe_redrawbelow(FAR struct nxbe_state_s *be, FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *rect); /**************************************************************************** * Name: nxbe_visible * * Descripton: * Return true if the point, pt, in window wnd is visible. pt is in * absolute screen coordinates * ****************************************************************************/ EXTERN boolean nxbe_visible(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_point_s *pos); /**************************************************************************** * Name: nxbe_clipper * * Descripton: * Perform flexible clipping operations. Callbacks are executed for * each oscured and visible portions of the window. * * Input Parameters: * wnd - The window to be clipped. * rect - The region of concern within the window * order - Specifies the order to process the parts of the non-intersecting * sub-rectangles. * cops - The callbacks to handle obscured and visible parts of the * sub-rectangles. * plane - The raster operations to be used by the callback functions. * These may vary with different color formats. * * Returned Value: * None * ****************************************************************************/ EXTERN void nxbe_clipper(FAR struct nxbe_window_s *wnd, FAR const struct nxgl_rect_s *dest, ubyte order, FAR struct nxbe_clipops_s *cops, FAR struct nxbe_plane_s *plane); /**************************************************************************** * Name: nxbe_clipnull * * Descripton: * The do-nothing clipping callback function * ****************************************************************************/ EXTERN void nxbe_clipnull(FAR struct nxbe_clipops_s *cops, FAR struct nxbe_plane_s *plane, FAR const struct nxgl_rect_s *rect); #undef EXTERN #if defined(__cplusplus) } #endif #endif /* __GRAPHICS_NXBE_NXBE_H */