/****************************************************************************
 * boards/arm/stm32/hymini-stm32v/src/stm32_usbmsc.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdio.h>
#include <syslog.h>
#include <errno.h>

#include <nuttx/board.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>

#include "stm32.h"

/* There is nothing to do here if SDIO support is not selected. */

#ifdef CONFIG_STM32_SDIO

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Configuration ************************************************************/

#ifndef CONFIG_SYSTEM_USBMSC_DEVMINOR1
#  define CONFIG_SYSTEM_USBMSC_DEVMINOR1 0
#endif

/* SLOT number(s) could depend on the board configuration */

#ifdef CONFIG_ARCH_BOARD_HYMINI_STM32V
#  undef STM32_MMCSDSLOTNO
#  define STM32_MMCSDSLOTNO 0
#else
/* Add configuration for new STM32 boards here */

#  error "Unrecognized STM32 board"
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: board_usbmsc_initialize
 *
 * Description:
 *   Perform architecture specific initialization of the USB MSC device.
 *
 ****************************************************************************/

int board_usbmsc_initialize(int port)
{
  /* If system/usbmsc is built as an NSH command, then SD slot should
   * already have been initialized in board_app_initialize()
   * (see stm32_appinit.c).
   * In this case, there is nothing further to be done here.
   */

#ifndef CONFIG_NSH_BUILTIN_APPS
  struct sdio_dev_s *sdio;
  int ret;

  /* First, get an instance of the SDIO interface */

  syslog(LOG_INFO, "Initializing SDIO slot %d\n", STM32_MMCSDSLOTNO);

  sdio = sdio_initialize(STM32_MMCSDSLOTNO);
  if (!sdio)
    {
      syslog(LOG_ERR, "ERROR: Failed to initialize SDIO slot %d\n",
            STM32_MMCSDSLOTNO);
      return -ENODEV;
    }

  /* Now bind the SDIO interface to the MMC/SD driver */

  syslog(LOG_INFO, "Bind SDIO to the MMC/SD driver, minor=%d\n",
         CONFIG_SYSTEM_USBMSC_DEVMINOR1);

  ret = mmcsd_slotinitialize(CONFIG_SYSTEM_USBMSC_DEVMINOR1, sdio);
  if (ret != OK)
    {
      syslog(LOG_ERR, ""
             "ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
             ret);
      return ret;
    }

  syslog(LOG_INFO, "Successfully bound SDIO to the MMC/SD driver\n");

  /* Then let's guess and say that there is a card in the slot.
   * I need to check to see if the Hy-Mini STM32v board supports a GPIO to
   * detect if there is a card in the slot.
   */

  sdio_mediachange(sdio, true);

#endif /* CONFIG_NSH_BUILTIN_APPS */

  return OK;
}

#endif /* CONFIG_STM32_SDIO */