############################################################################
# arch/z80/src/Makefile.sdccw
#
#   Copyright (C) 2008, 2011-2012, 2014 Gregory Nutt. All rights reserved.
#   Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
#    used to endorse or promote products derived from this software
#    without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################

# Tools
# CFLAGS, CPPFLAGS, ASFLAGS, LDFLAGS are set in $(TOPDIR)\Make.defs

CFLAGS += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip}
CFLAGS += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common}
CFLAGS += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched}

CPPFLAGS += -D__ASSEMBLY__

# Files and directories
# There should be one head source (.asm file)

HEAD_OBJ = $(HEAD_ASRC:$(ASMEXT)=$(OBJEXT))
STARTUP_OBJS ?= $(HEAD_OBJ)

# Assembly sources and objects

ASRCS = $(CHIP_ASRCS) $(CMN_ASRCS)
AOBJS = $(ASRCS:$(ASMEXT)=$(OBJEXT))

# C sources and objects

CSRCS = $(CHIP_CSRCS) $(CMN_CSRCS)
COBJS = $(CSRCS:.c=$(OBJEXT))

# All sources and objcts

SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)

# Sources that can have dependencies (no .asm files)

DEPSRCS = $(CSRCS)

# Directories

ARCH_SRCDIR = $(TOPDIR)\arch\$(CONFIG_ARCH)\src
BOARDDIR = $(TOPDIR)\arch\$(CONFIG_ARCH)\src\board

VPATH = chip:common:board

# Targets

all: $(HEAD_OBJ) libarch$(LIBEXT)

.PHONY: board\libboard$(LIBEXT) nuttx.lnk

$(AOBJS) $(HEAD_OBJ): %$(OBJEXT): %$(ASMEXT)
	$(call ASSEMBLE, $<, $@)

$(COBJS): %$(OBJEXT): %.c
	$(call COMPILE, $<, $@)

# This is a kludge to work around some conflicting symbols in the SDCC libraries

$(TOPDIR)\staging\$(SDCCLIB): $(SDCC_LIBDIR)\$(SDCCLIB)
	$(Q) cp $(SDCC_LIBDIR)\$(SDCCLIB) $(TOPDIR)\staging\$(SDCCLIB)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) calloc.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) malloc.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) realloc.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) free.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) printf_large.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) sprintf.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) vprintf.rel
ifneq ($(CONFIG_LIBC_ARCH_STRCPY),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) strcpy.rel
endif
ifneq ($(CONFIG_LIBC_ARCH_STRLEN),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) strlen.rel
endif
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strcat.rel
ifneq ($(CONFIG_LIBC_ARCH_STRCHR),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strchr.rel
endif
ifneq ($(CONFIG_LIBC_ARCH_STRCMP),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strcmp.rel
endif
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strcspn.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strncat.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strncmp.rel
ifneq ($(CONFIG_LIBC_ARCH_STRNCPY),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strncpy.rel
endif
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strpbrk.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strrchr.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strspn.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strstr.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _strtok.rel
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _memchr.rel
ifneq ($(CONFIG_LIBC_ARCH_MEMCMP),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _memcmp.rel
endif
ifneq ($(CONFIG_LIBC_ARCH_MEMCPY),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _memcpy.rel
endif
ifneq ($(CONFIG_LIBC_ARCH_MEMSET),y)
	$(Q) sdar d $(TOPDIR)\staging\$(SDCCLIB) _memset.rel
endif

# Create a header file that contains addressing information needed by the
# assemlby language start-up code.  Locate the IDLE thread stack at the
# end of RAM.  The heap then extends from s__HEAP to the bottom of the
# IDLE thread stack

asm_mem.h:
	@echo 	CONFIG_STACK_END == ($(CONFIG_RAM_SIZE) - 1)>>asm_mem.h
	@echo 	CONFIG_STACK_BASE == (CONFIG_STACK_END - $(CONFIG_IDLETHREAD_STACKSIZE))>>asm_mem.h

# Combine all objects in this directory into a library

libarch$(LIBEXT): asm_mem.h $(OBJS)
	$(call ARCHIVE, $@, $(OBJS))

# This builds the libboard library in the board\ subdirectory

board\libboard$(LIBEXT):
	$(Q) $(MAKE) -C board TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRAFLAGS="$(EXTRAFLAGS)"

# This target builds the final executable

nuttx.lnk:
	@echo LD: nuttx.lnk
	@echo -->nuttx.lnk
	@echo -k $(BOARDDIR)>>nuttx.lnk
	@echo -k  $(TOPDIR)\staging>>nuttx.lnk
	@echo -l libboard$(LIBEXT)>>nuttx.lnk
	$(Q) for %%G in ($(LINKLIBS)) do ( echo -l $(TOPDIR)\staging\%%G>> nuttx.lnk )
	@echo -l $(SDCCLIB)>>nuttx.lnk
ifneq ($(CONFIG_LINKER_HOME_AREA),)
	@echo -b _HOME=$(CONFIG_LINKER_HOME_AREA)>>nuttx.lnk
endif
ifneq ($(CONFIG_LINKER_CODE_AREA),)
	@echo -b _CODE=$(CONFIG_LINKER_CODE_AREA)>>nuttx.lnk
else
	@echo -b _CODE=0x0200>>nuttx.lnk
endif
ifneq ($(CONFIG_LINKER_DATA_AREA),)
	@echo -b _DATA=$(CONFIG_LINKER_DATA_AREA)>>nuttx.lnk
else
	@echo -b _DATA=0x8000>>nuttx.lnk
endif
	@echo -i>>nuttx.lnk
	@echo -x>>nuttx.lnk
	@echo -m>>nuttx.lnk
	@echo -j>>nuttx.lnk
	@echo nuttx.ihx>>nuttx.lnk
	@echo $(HEAD_OBJ)>>nuttx.lnk
	@echo -e>>nuttx.lnk

nuttx$(EXEEXT): asm_mem.h $(TOPDIR)\staging\$(SDCCLIB) $(HEAD_OBJ) board\libboard$(LIBEXT) nuttx.lnk
	@echo LD: nuttx.ihx
	$(Q) $(LD) -f nuttx.lnk
	$(Q) cp -f nuttx.map $(TOPDIR)\.
ifeq ($(EXEEXT),.cmd)
	sed s/:00000001FF/:00520001AD/ nuttx.ihx | \
	hex2cmd > $(TOPDIR)\nuttx.cmd
else
	$(Q) packihx nuttx.ihx > $(TOPDIR)\nuttx$(EXEEXT)
endif

# This is part of the top-level export target

export_startup: board\libboard$(LIBEXT) $(STARTUP_OBJS)
	$(Q) if not exist board\Makefile ( echo $(EXPORT_DIR)\startup does not exist )
	$(Q) if exist board\Makefile ( cp -f $(STARTUP_OBJS) "$(EXPORT_DIR)\startup" )

# Build dependencies

.depend: Makefile asm_mem.h chip\Make.defs $(DEPSRCS) $(TOPDIR)$(DELIM).config
	$(Q) if exist board\Makefile ( $(MAKE) -C board TOPDIR="$(TOPDIR)" depend )
	$(Q) $(MKDEP) --dep-path chip --dep-path common "$(CC)" -- $(CFLAGS) -- $(DEPSRCS) >Make.dep
	$(Q) touch $@

depend: .depend

clean:
	$(Q) if exist board\Makefile ( $(MAKE) -C board TOPDIR="$(TOPDIR)" clean )
	$(call DELFILE, asm_mem.h)
	$(call DELFILE, nuttx.*)
	$(call DELFILE, libarch$(LIBEXT))
	$(call CLEAN)

distclean: clean
	$(Q) if exist board\Makefile ( $(MAKE) -C board TOPDIR="$(TOPDIR)" distclean )
	$(call DELFILE, Make.dep)
	$(call DELFILE, .depend)

-include Make.dep