#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

menuconfig USBDEV_COMPOSITE
	bool "USB composite device support"
	default n
	---help---
		Enables USB composite device support

if USBDEV_COMPOSITE

#config COMPOSITE_IAD
#	bool ""
#	default n
#	---help---
#		If one of the members of the composite has multiple interfaces
#		(such as CDC/ACM), then an Interface Association Descriptor (IAD)
#		will be necessary.  Default:  IAD will be used automatically if
#		needed.  It should not be necessary to set this.

config COMPOSITE_EP0MAXPACKET
	int "Max packet size for endpoint 0"
	default 64
	---help---
		Max packet size for endpoint 0

config COMPOSITE_VENDORID
	hex "Composite vendor ID"
	default 0
	
config COMPOSITE_VENDORSTR
	string "Composite vendor ID"
	default "Nuttx"
	---help---
		The vendor ID code/string

config COMPOSITE_PRODUCTID
	hex "Composite product id"
	default 0
	
config COMPOSITE_PRODUCTSTR
	string "Composite product string"
	default "Composite device"
	---help---
		The product ID code/string

config COMPOSITE_SERIALSTR
	string "Composite serial string"
	default "001"
	---help---
		Device serial number string

config COMPOSITE_CONFIGSTR
	string "Configuration string"
	default "Nuttx COMPOSITE config"
	---help---
		Configuration string

config COMPOSITE_VERSIONNO
	string "Composite version number"
	default ""
	---help---
		Interface version number.
endif

config USBDEV_ISOCHRONOUS
	bool "Enable isochronous"
	default n
	---help---
		Build in extra support for isochronous endpoints

config USBDEV_DUALSPEED
	bool "Enable high and full speed"
	default n
	---help---
		Hardware handles high and full speed operation (USB 2.0)

choice USBDEV_POWERED
	prompt "Select USB device powered"
	default USBDEV_SELFPOWERED
config USBDEV_SELFPOWERED
	bool "Self powerd"
	---help---
		Will cause USB features to indicate that the device is self-powered

config USBDEV_BUSPOWERED
	bool "Bus powerd"
	---help---
		Will cause USB features to indicate that the device is self-powered

endchoice

config USBDEV_MAXPOWER
	int "Maximum power consumption in mA"
	default 100
	depends on USBDEV_BUSPOWERED
	---help---
		Maximum power consumption in mA

config USBDEV_TRACE
	bool "Enable USB tracing for debug"
	default n
	---help---
		Enables USB tracing for debug

config USBDEV_TRACE_NRECORDS
	int "Number of trace entries to remember"
	default 32 
	depends on USBDEV_TRACE
	---help---
		Number of trace entries to remember

menuconfig PL2303
	bool "Emulates the Prolific PL2303 serial/USB converter"
	default n
	---help---
		This logic emulates the Prolific PL2303 serial/USB converter

if PL2303
config PL2303_EPINTIN
	int "Logical endpoint numbers"
	default 1

config PL2303_EPBULKOUT
	int "Endpoint Bulkout"
	default 2

config PL2303_EPBULKIN
	int "Endpoint Bulkin"
	default 3

config PL2303_EP0MAXPACKET
	int "Packet and request buffer sizes"
	default 64

config PL2303_NWRREQS
	int "Number of read requests that can be in flight"
	default 4
	---help---
		The number of read requests that can be in flight

config PL2303_NRDREQS
	int "Number of write requests that can be in flight"
	default 4
	---help---
		The number of write/read requests that can be in flight

config PL2303_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Size of the serial receive/transmit buffers

config PL2303_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Size of the serial receive/transmit buffers

config PL2303_VENDORID
	hex "Vendor ID"
	default 0x067b

config PL2303_PRODUCTID
	hex "Product ID"
	default 0x2303

config PL2303_VENDORSTR
	string "Vendor string"
	default "NuttX"

config PL2303_PRODUCTSTR
	string "Product string"
	default "USBdev Serial"
endif

menuconfig CDCACM
	bool "USB Modem (CDC ACM) support"
	default n
	---help---
		Enables USB Modem (CDC ACM) support

if CDCACM
config CDCACM_COMPOSITE
	bool "CDCACM composite support"
	default n
	depends on USBDEV_COMPOSITE
	---help---
		Configure the CDC serial driver as part of a composite driver
		(only if CONFIG_USBDEV_COMPOSITE is also defined)

config CDCACM_IFNOBASE
	int "Offset the CDC/ACM interface numbers"
	default 0
	depends on CDCACM_COMPOSITE
	---help---
		If the CDC driver is part of a composite device, then this may need to 
		be defined to offset the CDC/ACM interface numbers so that they are
		unique and contiguous.  When used with the Mass Storage driver, the
		correct value for this offset is zero.

config CDCACM_STRBASE
	int "Offset the CDC/ACM string numbers"
	default 0
	depends on CDCACM_COMPOSITE
	---help---
		If the CDC driver is part of a composite device, then this may need to 
		be defined to offset the CDC/ACM string numbers so that they are
		unique and contiguous.  When used with the Mass Storage driver, the
		correct value for this offset is four (this value actuallly only needs
		to be defined if names are provided for the Notification interface,
		config CDCACM_NOTIFSTR, or the data interface, CONFIG_CDCACM_DATAIFSTR).

config CDCACM_EP0MAXPACKET
	int "Endpoint 0 max packet size"
	default 64
	---help---
		Endpoint 0 max packet size. Default 64.

config CDCACM_EPINTIN
	int "Hardware endpoint that supports interrupt IN operation"
	default 2
	---help---
		The logical 7-bit address of a hardware endpoint that supports
		interrupt IN operation.  Default 2.

config CDCACM_EPINTIN_FSSIZE
	int "Endpoint in full speed size"
	default 64
	---help---
		Max package size for the interrupt IN endpoint if full speed mode.
		Default 64.

config CDCACM_EPINTIN_HSSIZE
	int "Endpoint in high speed size"
	default 64
	---help---
		Max package size for the interrupt IN endpoint if high speed mode.
		Default 64.

config CDCACM_EPBULKOUT
	int "Endpoint bulk out"
	default 0
	---help---
		The logical 7-bit address of a hardware endpoint that supports
		bulk OUT operation

config CDCACM_EPBULKOUT_FSSIZE
	int "Endpoint bulk out full speed size"
	default 64
	---help---
		Max package size for the bulk OUT endpoint if full speed mode.
		Default 64.

config CDCACM_EPBULKOUT_HSSIZE
	int "Endpoint bulk out high speed size"
	default 512
	---help---
		Max package size for the bulk OUT endpoint if high speed mode.
		Default 512.

config CDCACM_EPBULKIN
	int "Endpoint bulk in"
	default 0
	---help---
		The logical 7-bit address of a hardware endpoint that supports
		bulk IN operation

config CDCACM_EPBULKIN_FSSIZE
	int "Endpoint bulk in full speed size"
	default 64
	---help---
		Max package size for the bulk IN endpoint if full speed mode.
		Default 64.

config CDCACM_EPBULKIN_HSSIZE
	int "Endpoint bulk in high speed size"
	default 512
	---help---
		Max package size for the bulk IN endpoint if high speed mode.
		Default 512.

config CDCACM_NWRREQS
	int "Number of read requests that can be in flight"
	default 4
	---help---
		The number of read requests that can be in flight

config CDCACM_NRDREQS
	int "Number of write requests that can be in flight"
	default 4
	---help---
		The number of write/read requests that can be in flight

config CDCACM_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Size of the serial receive/transmit buffers

config CDCACM_TXBUFSIZE
	bool "Transmit buffer size"
	default 256
	---help---
		Size of the serial receive/transmit buffers

config CDCACM_VENDORID
	hex "Vendor ID"
	default 0x0525
	---help---
		The vendor ID code/string.  Default 0x0525 and "NuttX"
		0x0525 is the Netchip vendor and should not be used in any
		products.  This default VID was selected for compatibility with
		the Linux CDC ACM default VID.

config CDCACM_PRODUCTID
	hex "Product ID"
	default 0xa4a7
	---help---
		The product ID code/string. Default 0xa4a7 and "CDC/ACM Serial"
		0xa4a7 was selected for compatibility with the Linux CDC ACM
		default PID.

config CDCACM_VENDORSTR
	string "Vendor string"
	default "NuttX"

config CDCACM_PRODUCTSTR
	string "Product string"
	default "USBdev Serial"
endif

menuconfig USBMSC
	bool "USB Mass storage class device"
	default n
	---help---
		References:
		"Universal Serial Bus Mass Storage Class, Specification Overview,"
		Revision 1.2,  USB Implementer's Forum, June 23, 2003.
		
		"Universal Serial Bus Mass Storage Class, Bulk-Only Transport,"
		Revision 1.0, USB Implementer's Forum, September 31, 1999.
		
		"SCSI Primary Commands - 3 (SPC-3),"  American National Standard
		for Information Technology, May 4, 2005
		
		"SCSI Primary Commands - 4 (SPC-4),"  American National Standard
		for Information Technology, July 19, 2008
		
		"SCSI Block Commands -2 (SBC-2)," American National Standard
		for Information Technology, November 13, 2004
		
		"SCSI Multimedia Commands - 3 (MMC-3),"  American National Standard
		for Information Technology, November 12, 2001

if USBMSC
config USBMSC_COMPOSITE
	bool "Mass storage composite support"
	default n
	depends on USBDEV_COMPOSITE
	---help---
		Configure the mass storage driver as part of a composite driver
		(only if CONFIG_USBDEV_COMPOSITE is also defined)

config USBMSC_IFNOBASE
	int "Offset the mass storage interface number"
	default 2
	depends on USBMSC_COMPOSITE
	---help---
		If the CDC driver is part of a composite device, then this may need to 
		be defined to offset the mass storage interface number so that it is
		unique and contiguous.  When used with the CDC/ACM driver, the
		correct value for this offset is two (because of the two CDC/ACM
		interfaces that will precede it).

config USBMSC_STRBASE
	int "Offset the mass storage string numbers"
	default 2
	depends on USBMSC_COMPOSITE
	---help---
		If the CDC driver is part of a composite device, then this may need to 
		be defined to offset the mass storage string numbers so that they are
		unique and contiguous.  When used with the CDC/ACM driver, the
		correct value for this offset is four (or perhaps 5 or 6, depending
		on if CONFIG_CDCACM_NOTIFSTR or CONFIG_CDCACM_DATAIFSTR are defined).

config USBMSC_EP0MAXPACKET
	int "Max packet size for endpoint 0"
	default 64
	---help---
		Max packet size for endpoint 0

config USBMSC_EPBULKOUT
	int "Endpoint bulk out"
	default 0
	---help---
		The logical 7-bit address of a hardware endpoints that support
		bulk OUT and IN operations

config USBMSC_EPBULKIN
	int "Endpoint bulk in"
	default 0
	---help---
		The logical 7-bit address of a hardware endpoints that support
		bulk OUT and IN operations

config USBMSC_NWRREQS
	int "The number of write requests that can be in flight"
	default 4
	---help---
		The number of write/read requests that can be in flight
config USBMSC_NRDREQS
	int "The number of read requests that can be in flight"
	default 4
	---help---
		The number of write/read requests that can be in flight

config USBMSC_BULKINREQLEN
	int "Bulk in request size"
	default 512
	
config USBMSC_BULKOUTREQLEN
	int "Bulk out request size"
	default 512
	---help---
		The size of the buffer in each write/read request.  This
		value needs to be at least as large as the endpoint
		maxpacket and ideally as large as a block device sector.

config USBMSC_VENDORID
	hex "Mass stroage Vendor ID"
	default 0x00
	
config USBMSC_VENDORSTR
	string "Mass stroage vendor string"
	default "Nuttx"
	---help---
		The vendor ID code/string

config USBMSC_PRODUCTID
	hex "Mass stroage Product ID"
	default 0x00

config USBMSC_PRODUCTSTR
	string "Mass stroage product string"
	default "Mass stroage"

config USBMSC_VERSIONNO
	hex "USB MSC Version Number"
	default "0x399"

config USBMSC_REMOVABLE
	bool "Mass stroage remove able"
	default n
	---help---
		Select if the media is removable
		USB Composite Device Configuration
endif