#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_BOARD_Z20X

choice
	prompt "Build selection"
	default Z20X_PROGRAM

config Z20X_SDBOOT
	bool "SD boot loader"
	select LIBC_HEX2BIN
	select EZ80_BOOTLOADER
	depends on EZ80_SPI && MMCSD_SPI
	---help---
		Select this option only with the boards/z20x/sdboot
		configuration.  This will enable the components needed only by the
		boot loader.

config Z20X_W25BOOT
	bool "W25 boot loader"
	depends on Z20X_W25_CHARDEV
	select LIBC_HEX2BIN
	select EZ80_BOOTLOADER
	depends on EZ80_SPI && MTD_W25
	---help---
		Select this option only with the boards/z20x/w25boot
		configuration.  This will enable the components needed only by the
		boot loader.

config Z20X_PROGRAM
	bool "Loadable program"
	select EZ80_PROGRAM
	---help---
		Normal program that resides on SD card or in W25 FLASH and is
		loaded into RAM by a bootloader.

config Z20X_STANDALONE
	bool "Standalone FLASH progroam"
	depends on BOOT_RUNFROMFLASH
	---help---
		Select this option only to build a small program that executes
		from z20x FLASH memory.

config Z20X_COPYTORAM
	bool "Copy to RAM"
	depends on BOOT_RUNFROMEXTSRAM
	---help---
		This option is available only when running from external SRAM
		(CONFIG_BOOT_RUNFROMEXTSRAM).  In that case there are two possible
		options:  (1) The configuration runs entirely out of SRAM and must
		be copied into SRAM by a boot loader.  Or (2) The configuration
		boots out of FLASH, copies itself to SRAM, and runs from SRAM.  This
		configuration setting selects that latter option.

endchoice

config Z20X_W25_PROGSIZE
	int "W25 partition size"
	default 262144
	range 131072 524288
	depends on Z20X_W25BOOT
	---help---
		This is the size of the partition at the beginning to the W25
		serial FLASH that will be used to hold the boot program.  Since
		this program must run from SRAM, there would be no purpose int
		making this size any larger than the size of the internal SRAM.

choice
	prompt "Winbond W25 Usage"
	default Z20X_W25_CHARDEV
	depends on EZ80_SPI && MTD_W25

config Z20X_W25_CHARDEV
	bool "Character device"
	select BCH

config Z20X_W25_BLOCKDEV
	bool "Block device"

config Z20X_W25_MTDDEV
	bool "MTD device"

endchoice

config Z20X_W25_MINOR
	int "W25 device minor number"
	default 0
	range 0 255
	depends on Z20X_W25_CHARDEV

endif # ARCH_BOARD_Z20X