/**************************************************************************** * drivers/usbdev/usbmsc_desc.c * * Copyright (C) 2011-2012, 2015, 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "usbmsc.h" /**************************************************************************** * Private Data ****************************************************************************/ /* Descriptors **************************************************************/ /* Device descriptor. If the USB mass storage device is configured as part * of a composite device, then the device descriptor will be provided by the * composite device logic. */ #ifndef CONFIG_USBMSC_COMPOSITE static const struct usb_devdesc_s g_devdesc = { USB_SIZEOF_DEVDESC, /* len */ USB_DESC_TYPE_DEVICE, /* type */ {LSBYTE(0x0200), MSBYTE(0x0200)}, /* usb */ USB_CLASS_PER_INTERFACE, /* classid */ 0, /* subclass */ 0, /* protocol */ CONFIG_USBMSC_EP0MAXPACKET, /* maxpacketsize */ { /* vendor */ LSBYTE(CONFIG_USBMSC_VENDORID), MSBYTE(CONFIG_USBMSC_VENDORID) }, { /* product */ LSBYTE(CONFIG_USBMSC_PRODUCTID), MSBYTE(CONFIG_USBMSC_PRODUCTID) }, { /* device */ LSBYTE(CONFIG_USBMSC_VERSIONNO), MSBYTE(CONFIG_USBMSC_VERSIONNO) }, USBMSC_MANUFACTURERSTRID, /* imfgr */ USBMSC_PRODUCTSTRID, /* iproduct */ USBMSC_SERIALSTRID, /* serno */ USBMSC_NCONFIGS /* nconfigs */ }; #endif #ifdef CONFIG_USBDEV_DUALSPEED #ifndef CONFIG_USBMSC_COMPOSITE static const struct usb_qualdesc_s g_qualdesc = { USB_SIZEOF_QUALDESC, /* len */ USB_DESC_TYPE_DEVICEQUALIFIER, /* type */ { /* usb */ LSBYTE(0x0200), MSBYTE(0x0200) }, USB_CLASS_PER_INTERFACE, /* classid */ 0, /* subclass */ 0, /* protocol */ CONFIG_USBMSC_EP0MAXPACKET, /* mxpacketsize */ USBMSC_NCONFIGS, /* nconfigs */ 0, /* reserved */ }; #endif #endif /**************************************************************************** * Public Data ****************************************************************************/ /* Strings ******************************************************************/ #ifndef CONFIG_USBMSC_COMPOSITE const char g_mscvendorstr[] = CONFIG_USBMSC_VENDORSTR; const char g_mscproductstr[] = CONFIG_USBMSC_PRODUCTSTR; const char g_mscserialstr[] = CONFIG_USBMSC_SERIALSTR; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: usbmsc_mkstrdesc * * Description: * Construct a string descriptor * ****************************************************************************/ int usbmsc_mkstrdesc(uint8_t id, struct usb_strdesc_s *strdesc) { const char *str; int len; int ndata; int i; switch (id) { #ifndef CONFIG_USBMSC_COMPOSITE case 0: { /* Descriptor 0 is the language id */ strdesc->len = 4; strdesc->type = USB_DESC_TYPE_STRING; strdesc->data[0] = LSBYTE(USBMSC_STR_LANGUAGE); strdesc->data[1] = MSBYTE(USBMSC_STR_LANGUAGE); return 4; } case USBMSC_MANUFACTURERSTRID: str = g_mscvendorstr; break; case USBMSC_PRODUCTSTRID: str = g_mscproductstr; break; case USBMSC_SERIALSTRID: str = g_mscserialstr; break; #endif /* case USBMSC_CONFIGSTRID: */ case USBMSC_INTERFACESTRID: str = CONFIG_USBMSC_CONFIGSTR; break; default: return -EINVAL; } /* The string is utf16-le. The poor man's utf-8 to utf16-le * conversion below will only handle 7-bit en-us ascii */ len = strlen(str); if (len > (USBMSC_MAXSTRLEN / 2)) { len = (USBMSC_MAXSTRLEN / 2); } for (i = 0, ndata = 0; i < len; i++, ndata += 2) { strdesc->data[ndata] = str[i]; strdesc->data[ndata + 1] = 0; } strdesc->len = ndata + 2; strdesc->type = USB_DESC_TYPE_STRING; return strdesc->len; } /**************************************************************************** * Name: usbmsc_getdevdesc * * Description: * Return a pointer to the raw device descriptor * ****************************************************************************/ #ifndef CONFIG_USBMSC_COMPOSITE FAR const struct usb_devdesc_s *usbmsc_getdevdesc(void) { return &g_devdesc; } #endif /**************************************************************************** * Name: usbmsc_copy_epdesc * * Description: * Copies the requested Endpoint Description into the buffer given. * Returns the number of Bytes filled in ( sizeof(struct usb_epdesc_s) ). * ****************************************************************************/ int usbmsc_copy_epdesc(enum usbmsc_epdesc_e epid, FAR struct usb_epdesc_s *epdesc, FAR struct usbdev_devinfo_s *devinfo, bool hispeed) { #ifndef CONFIG_USBDEV_DUALSPEED UNUSED(hispeed); #endif switch (epid) { case USBMSC_EPBULKOUT: /* Bulk OUT endpoint */ { epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ epdesc->addr = USBMSC_MKEPBULKOUT(devinfo); /* Endpoint address */ epdesc->attr = USBMSC_EPOUTBULK_ATTR; /* Endpoint attributes */ #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { /* Maximum packet size (high speed) */ epdesc->mxpacketsize[0] = LSBYTE(USBMSC_HSBULKMAXPACKET); epdesc->mxpacketsize[1] = MSBYTE(USBMSC_HSBULKMAXPACKET); } else #endif { /* Maximum packet size (full speed) */ epdesc->mxpacketsize[0] = LSBYTE(USBMSC_FSBULKMAXPACKET); epdesc->mxpacketsize[1] = MSBYTE(USBMSC_FSBULKMAXPACKET); } epdesc->interval = 0; /* Interval */ } break; case USBMSC_EPBULKIN: /* Bulk IN endpoint */ { epdesc->len = USB_SIZEOF_EPDESC; /* Descriptor length */ epdesc->type = USB_DESC_TYPE_ENDPOINT; /* Descriptor type */ epdesc->addr = USBMSC_MKEPBULKIN(devinfo); /* Endpoint address */ epdesc->attr = USBMSC_EPINBULK_ATTR; /* Endpoint attributes */ #ifdef CONFIG_USBDEV_DUALSPEED if (hispeed) { /* Maximum packet size (high speed) */ epdesc->mxpacketsize[0] = LSBYTE(USBMSC_HSBULKMAXPACKET); epdesc->mxpacketsize[1] = MSBYTE(USBMSC_HSBULKMAXPACKET); } else #endif { /* Maximum packet size (full speed) */ epdesc->mxpacketsize[0] = LSBYTE(USBMSC_FSBULKMAXPACKET); epdesc->mxpacketsize[1] = MSBYTE(USBMSC_FSBULKMAXPACKET); } epdesc->interval = 0; /* Interval */ } break; default: return 0; } return sizeof(struct usb_epdesc_s); } /**************************************************************************** * Name: usbmsc_mkcfgdesc * * Description: * Construct the configuration descriptor * ****************************************************************************/ #ifdef CONFIG_USBDEV_DUALSPEED int16_t usbmsc_mkcfgdesc(uint8_t *buf, FAR struct usbdev_devinfo_s *devinfo, uint8_t speed, uint8_t type) #else int16_t usbmsc_mkcfgdesc(uint8_t *buf, FAR struct usbdev_devinfo_s *devinfo) #endif { int length = 0; bool hispeed = false; #ifdef CONFIG_USBDEV_DUALSPEED hispeed = (speed == USB_SPEED_HIGH); /* Check for switches between high and full speed */ if (type == USB_DESC_TYPE_OTHERSPEEDCONFIG) { hispeed = !hispeed; } #endif /* Fill in all descriptors directly to the buf */ /* Configuration descriptor. If the USB mass storage device is * configured as part of a composite device, then the configuration * descriptor will be provided by the composite device logic. */ #ifndef CONFIG_USBMSC_COMPOSITE { /* Configuration descriptor If the USB mass storage device is configured as part * of a composite device, then the configuration descriptor will be provided * by the composite device logic. */ FAR struct usb_cfgdesc_s *dest = (FAR struct usb_cfgdesc_s *)buf; dest->len = USB_SIZEOF_CFGDESC; /* Descriptor length */ #ifdef CONFIG_USBDEV_DUALSPEED dest->type = type; /* Descriptor type */ #else dest->type = USB_DESC_TYPE_CONFIG; /* Descriptor type */ #endif dest->totallen[0] = LSBYTE(SIZEOF_USBMSC_CFGDESC); /* LS Total length */ dest->totallen[1] = MSBYTE(SIZEOF_USBMSC_CFGDESC); /* MS Total length */ dest->ninterfaces = USBMSC_NINTERFACES; /* Number of interfaces */ dest->cfgvalue = USBMSC_CONFIGID; /* Configuration value */ dest->icfg = USBMSC_CONFIGSTRID; /* Configuration */ dest->attr = USB_CONFIG_ATTR_ONE | /* Attributes */ USBMSC_SELFPOWERED | USBMSC_REMOTEWAKEUP; dest->mxpower = (CONFIG_USBDEV_MAXPOWER + 1) / 2; /* Max power (mA/2) */ buf += sizeof(struct usb_cfgdesc_s); length += sizeof(struct usb_cfgdesc_s); } #endif /* Copy the canned interface descriptor */ { /* Single interface descriptor */ FAR struct usb_ifdesc_s * dest = (struct usb_ifdesc_s *)buf; dest->len = USB_SIZEOF_IFDESC; /* Descriptor length */ dest->type = USB_DESC_TYPE_INTERFACE; /* Descriptor type */ dest->ifno = devinfo->ifnobase; /* Interface number */ dest->alt = USBMSC_ALTINTERFACEID; /* Alternate setting */ dest->neps = USBMSC_NENDPOINTS; /* Number of endpoints */ dest->classid = USB_CLASS_MASS_STORAGE; /* Interface class */ dest->subclass = USBMSC_SUBCLASS_SCSI; /* Interface sub-class */ dest->protocol = USBMSC_PROTO_BULKONLY; /* Interface protocol */ dest->iif = devinfo->strbase + USBMSC_INTERFACESTRID; /* iInterface */ buf += sizeof(struct usb_ifdesc_s); length += sizeof(struct usb_ifdesc_s); } /* Make the two endpoint configurations */ /* Bulk IN endpoint descriptor */ { int len = usbmsc_copy_epdesc(USBMSC_EPBULKIN, (FAR struct usb_epdesc_s *)buf, devinfo, hispeed); buf += len; length += len; } /* Bulk OUT endpoint descriptor */ { int len = usbmsc_copy_epdesc(USBMSC_EPBULKOUT, (FAR struct usb_epdesc_s *)buf, devinfo, hispeed); buf += len; length += len; } return SIZEOF_USBMSC_CFGDESC; } /**************************************************************************** * Name: usbmsc_getqualdesc * * Description: * Return a pointer to the raw qual descriptor * ****************************************************************************/ #if !defined(CONFIG_USBMSC_COMPOSITE) && defined(CONFIG_USBDEV_DUALSPEED) FAR const struct usb_qualdesc_s *usbmsc_getqualdesc(void) { return &g_qualdesc; } #endif