/************************************************************************************ * arch/drivers/analog/ads1255.c * * Copyright (C) 2011 Li Zhuoyi. All rights reserved. * Author: Li Zhuoyi * History: 0.1 2011-08-05 initial version * 0.2 2011-08-25 fix bug in g_adcdev (cd_ops -> ad_ops,cd_priv -> ad_priv) * * This file is a part of NuttX: * * Copyright (C) 2010 Gregory Nutt. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_ADC_ADS1255) #define ADS125X_BUFON 0x02 #define ADS125X_BUFOFF 0x00 #define ADS125X_PGA1 0x00 #define ADS125X_PGA2 0x01 #define ADS125X_PGA4 0x02 #define ADS125X_PGA8 0x03 #define ADS125X_PGA16 0x04 #define ADS125X_PGA32 0x05 #define ADS125X_PGA64 0x06 #define ADS125X_RDATA 0x01 /* Read Data */ #define ADS125X_RDATAC 0x03 /* Read Data Continuously */ #define ADS125X_SDATAC 0x0F /* Stop Read Data Continuously */ #define ADS125X_RREG 0x10 /* Read from REG */ #define ADS125X_WREG 0x50 /* Write to REG */ #define ADS125X_SELFCAL 0xF0 /* Offset and Gain Self-Calibration */ #define ADS125X_SELFOCAL 0xF1 /* Offset Self-Calibration */ #define ADS125X_SELFGCAL 0xF2 /* Gain Self-Calibration */ #define ADS125X_SYSOCAL 0xF3 /* System Offset Calibration */ #define ADS125X_SYSGCAL 0xF4 /* System Gain Calibration */ #define ADS125X_SYNC 0xFC /* Synchronize the A/D Conversion */ #define ADS125X_STANDBY 0xFD /* Begin Standby Mode */ #define ADS125X_RESET 0xFE /* Reset to Power-Up Values */ #define ADS125X_WAKEUP 0xFF /* Completes SYNC and Exits Standby Mode */ #ifndef CONFIG_ADS1255_FREQUENCY # define CONFIG_ADS1255_FREQUENCY 1000000 #endif #ifndef CONFIG_ADS1255_MUX # define CONFIG_ADS1255_MUX 0x01 #endif #ifndef CONFIG_ADS1255_CHMODE # define CONFIG_ADS1255_CHMODE 0x00 #endif #ifndef CONFIG_ADS1255_BUFON # define CONFIG_ADS1255_BUFON 1 #endif #ifndef CONFIG_ADS1255_PGA # define CONFIG_ADS1255_PGA ADS125X_PGA2 #endif #ifndef CONFIG_ADS1255_SPS # define CONFIG_ADS1255_SPS 50 #endif /**************************************************************************** * ad_private Types ****************************************************************************/ struct up_dev_s { uint8_t channel; uint32_t sps; uint8_t pga; uint8_t buf; const uint8_t *mux; int irq; int devno; FAR struct spi_dev_s *spi; /* Cached SPI device reference */ }; /**************************************************************************** * ad_private Function Prototypes ****************************************************************************/ /* ADC methods */ static void adc_reset(FAR struct adc_dev_s *dev); static int adc_setup(FAR struct adc_dev_s *dev); static void adc_shutdown(FAR struct adc_dev_s *dev); static void adc_rxint(FAR struct adc_dev_s *dev, bool enable); static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg); static int adc_interrupt(int irq, void *context); /**************************************************************************** * ad_private Data ****************************************************************************/ static const struct adc_ops_s g_adcops = { .ao_reset = adc_reset, /* ao_reset */ .ao_setup = adc_setup, /* ao_setup */ .ao_shutdown = adc_shutdown, /* ao_shutdown */ .ao_rxint = adc_rxint, /* ao_rxint */ .ao_ioctl = adc_ioctl /* ao_read */ }; static struct up_dev_s g_adcpriv = { .mux = (const uint8_t []) { CONFIG_ADS1255_MUX,0 }, .sps = CONFIG_ADS1255_SPS, .channel = 0, .irq = CONFIG_ADS1255_IRQ, }; static struct adc_dev_s g_adcdev = { .ad_ops = &g_adcops, .ad_priv= &g_adcpriv, }; /**************************************************************************** * Private Functions ****************************************************************************/ static uint8_t getspsreg(uint16_t sps) { static const unsigned short sps_tab[]= { 3, 7, 12, 20, 27, 40, 55, 80, 300, 750, 1500, 3000, 5000, 10000, 20000, 65535, }; static const unsigned char sps_reg[]= { 0x03, 0x13, 0x23, 0x33, 0x43, 0x53, 0x63, 0x72, 0x82, 0x92, 0xa1, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, }; int i; for (i = 0; i < 16; i++) { if (sps < sps_tab[i]) { return sps_reg[i]; } } return sps_reg[15]; } /**************************************************************************** * ad_private Functions ****************************************************************************/ /* Reset the ADC device. Called early to initialize the hardware. This * is called, before ao_setup() and on error conditions. */ static void adc_reset(FAR struct adc_dev_s *dev) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv; FAR struct spi_dev_s *spi = priv->spi; SPI_SETMODE(spi, SPIDEV_MODE1); SPI_SETBITS(spi, 8); SPI_SETFREQUENCY(spi, CONFIG_ADS1255_FREQUENCY); usleep(1000); SPI_SELECT(spi, priv->devno, true); SPI_SEND(spi,ADS125X_WREG+0x03); /* WRITE SPS REG */ SPI_SEND(spi,0x00); /* count=1 */ SPI_SEND(spi,0x63); SPI_SELECT(spi, priv->devno, false); } /* Configure the ADC. This method is called the first time that the ADC * device is opened. This will occur when the port is first opened. * This setup includes configuring and attaching ADC interrupts. Interrupts * are all disabled upon return. */ static int adc_setup(FAR struct adc_dev_s *dev) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv; FAR struct spi_dev_s *spi = priv->spi; int ret = irq_attach(priv->irq, adc_interrupt); if (ret == OK) { SPI_SELECT(spi, priv->devno, true); SPI_SEND(spi,ADS125X_WREG); /* WRITE REG from 0 */ SPI_SEND(spi,0x03); /* count=4+1 */ if (priv->buf) { SPI_SEND(spi,ADS125X_BUFON); /* REG0 STATUS BUFFER ON */ } else { SPI_SEND(spi,ADS125X_BUFOFF); } SPI_SEND(spi,priv->mux[0]); SPI_SEND(spi,priv->pga); /* REG2 ADCON PGA=2 */ SPI_SEND(spi,getspsreg(priv->sps)); usleep(1000); SPI_SEND(spi,ADS125X_SELFCAL); SPI_SELECT(spi, priv->devno, false); up_enable_irq(priv->irq); } return ret; } /* Disable the ADC. This method is called when the ADC device is closed. * This method reverses the operation the setup method. */ static void adc_shutdown(FAR struct adc_dev_s *dev) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv; up_disable_irq(priv->irq); irq_detach(priv->irq); } /* Call to enable or disable RX interrupts */ static void adc_rxint(FAR struct adc_dev_s *dev, bool enable) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->ad_priv; if (enable) { up_enable_irq(priv->irq); } else { up_disable_irq(priv->irq); } } /* All ioctl calls will be routed through this method */ static int adc_ioctl(FAR struct adc_dev_s *dev, int cmd, unsigned long arg) { dbg("Fix me:Not Implemented\n"); return 0; } static int adc_interrupt(int irq, void *context) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv; FAR struct spi_dev_s *spi = priv->spi; unsigned char buf[4]; unsigned char ch; SPI_SELECT(spi, priv->devno, true); SPI_SEND(spi,ADS125X_RDATA); up_udelay(10); buf[3]=SPI_SEND(spi,0xff); buf[2]=SPI_SEND(spi,0xff); buf[1]=SPI_SEND(spi,0xff); buf[0]=0; priv->channel++; ch = priv->mux[priv->channel]; if ( ch == 0 ) { priv->channel=0; ch = priv->mux[0]; } SPI_SEND(spi,ADS125X_WREG+0x01); SPI_SEND(spi,0x00); SPI_SEND(spi,ch); SPI_SEND(spi,ADS125X_SYNC); up_udelay(2); SPI_SEND(spi,ADS125X_WAKEUP); SPI_SELECT(spi, priv->devno, false); adc_receive(&g_adcdev,priv->channel,*(int32_t *)buf); return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: up_ads1255initialize * * Description: * Initialize the selected adc port * * Input Parameter: * Port number (for hardware that has multiple adc interfaces) * * Returned Value: * Valid can device structure reference on success; a NULL on failure * ****************************************************************************/ FAR struct adc_dev_s *up_ads1255initialize(FAR struct spi_dev_s *spi, unsigned int devno) { FAR struct up_dev_s *priv = (FAR struct up_dev_s *)g_adcdev.ad_priv; /* Driver state data */ priv->spi = spi; priv->devno = devno; return &g_adcdev; } #endif