/************************************************************************************ * drivers/serial/serial.c * * Copyright (C) 2007-2009, 2011-2012 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ************************************************************************************/ /************************************************************************************ * Included Files ************************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /************************************************************************************ * Definitions ************************************************************************************/ /* The architecture must provide up_putc for this driver */ #ifndef CONFIG_ARCH_LOWPUTC # error "Architecture must provide up_putc() for this driver" #endif #define uart_putc(ch) up_putc(ch) #define HALF_SECOND_MSEC 500 #define HALF_SECOND_USEC 500000L /************************************************************************************ * Private Types ************************************************************************************/ /************************************************************************************ * Private Function Prototypes ************************************************************************************/ static int uart_open(FAR struct file *filep); static int uart_close(FAR struct file *filep); static ssize_t uart_read(FAR struct file *filep, FAR char *buffer, size_t buflen); static ssize_t uart_write(FAR struct file *filep, FAR const char *buffer, size_t buflen); static int uart_ioctl(FAR struct file *filep, int cmd, unsigned long arg); #ifndef CONFIG_DISABLE_POLL static int uart_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup); #endif /************************************************************************************ * Private Variables ************************************************************************************/ static const struct file_operations g_serialops = { uart_open, /* open */ uart_close, /* close */ uart_read, /* read */ uart_write, /* write */ 0, /* seek */ uart_ioctl /* ioctl */ #ifndef CONFIG_DISABLE_POLL , uart_poll /* poll */ #endif }; /************************************************************************************ * Private Functions ************************************************************************************/ /************************************************************************************ * Name: uart_takesem ************************************************************************************/ static void uart_takesem(FAR sem_t *sem) { while (sem_wait(sem) != 0) { /* The only case that an error should occur here is if * the wait was awakened by a signal. */ ASSERT(*get_errno_ptr() == EINTR); } } /************************************************************************************ * Name: uart_givesem ************************************************************************************/ #define uart_givesem(sem) (void)sem_post(sem) /**************************************************************************** * Name: uart_pollnotify ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL static void uart_pollnotify(FAR uart_dev_t *dev, pollevent_t eventset) { int i; for (i = 0; i < CONFIG_SERIAL_NPOLLWAITERS; i++) { struct pollfd *fds = dev->fds[i]; if (fds) { fds->revents |= (fds->events & eventset); if (fds->revents != 0) { fvdbg("Report events: %02x\n", fds->revents); sem_post(fds->sem); } } } } #else # define uart_pollnotify(dev,event) #endif /************************************************************************************ * Name: uart_putxmitchar ************************************************************************************/ static void uart_putxmitchar(FAR uart_dev_t *dev, int ch) { irqstate_t flags; int nexthead; /* Increment to see what the next head pointer will be. We need to use the "next" * head pointer to determine when the circular buffer would overrun */ nexthead = dev->xmit.head + 1; if (nexthead >= dev->xmit.size) { nexthead = 0; } /* Loop until we are able to add the character to the TX buffer */ for (;;) { if (nexthead != dev->xmit.tail) { dev->xmit.buffer[dev->xmit.head] = ch; dev->xmit.head = nexthead; return; } else { /* Inform the interrupt level logic that we are waiting. * This and the following steps must be atomic. */ flags = irqsave(); dev->xmitwaiting = true; /* Wait for some characters to be sent from the buffer * with the TX interrupt enabled. When the TX interrupt * is enabled, uart_xmitchars should execute and remove * some of the data from the TX buffer. */ uart_enabletxint(dev); uart_takesem(&dev->xmitsem); uart_disabletxint(dev); irqrestore(flags); } } } /************************************************************************************ * Name: uart_irqwrite ************************************************************************************/ static ssize_t uart_irqwrite(FAR uart_dev_t *dev, FAR const char *buffer, size_t buflen) { ssize_t ret = buflen; /* Force each character through the low level interface */ for (; buflen; buflen--) { int ch = *buffer++; uart_putc(ch); /* If this is the console, then we should replace LF with LF-CR */ if (ch == '\n') { uart_putc('\r'); } } return ret; } /************************************************************************************ * Name: uart_write ************************************************************************************/ static ssize_t uart_write(FAR struct file *filep, FAR const char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR uart_dev_t *dev = inode->i_private; ssize_t ret = buflen; /* We may receive console writes through this path from * interrupt handlers and from debug output in the IDLE task! * In these cases, we will need to do things a little * differently. */ if (up_interrupt_context() || getpid() == 0) { if (dev->isconsole) { irqstate_t flags = irqsave(); ret = uart_irqwrite(dev, buffer, buflen); irqrestore(flags); return ret; } else { return ERROR; } } /* Only one user can be accessing dev->xmit.head at once */ uart_takesem(&dev->xmit.sem); /* Loop while we still have data to copy to the transmit buffer. * we add data to the head of the buffer; uart_xmitchars takes the * data from the end of the buffer. */ uart_disabletxint(dev); for (; buflen; buflen--) { int ch = *buffer++; /* Put the character into the transmit buffer */ uart_putxmitchar(dev, ch); /* If this is the console, then we should replace LF with LF-CR */ if (dev->isconsole && ch == '\n') { uart_putxmitchar(dev, '\r'); } } if (dev->xmit.head != dev->xmit.tail) { uart_enabletxint(dev); } uart_givesem(&dev->xmit.sem); return ret; } /************************************************************************************ * Name: uart_read ************************************************************************************/ static ssize_t uart_read(FAR struct file *filep, FAR char *buffer, size_t buflen) { FAR struct inode *inode = filep->f_inode; FAR uart_dev_t *dev = inode->i_private; irqstate_t flags; ssize_t recvd = 0; int16_t tail; /* Only one user can be accessing dev->recv.tail at once */ uart_takesem(&dev->recv.sem); /* Loop while we still have data to copy to the receive buffer. * we add data to the head of the buffer; uart_xmitchars takes the * data from the end of the buffer. */ while (recvd < buflen) { /* Check if there is more data to return in the circular buffer. * NOTE: Rx interrupt handling logic may aynchronously increment * the head index but must not modify the tail index. The tail * index is only modified in this function. Therefore, no * special handshaking is required here. * * The head and tail pointers are 16-bit values. The only time that * the following could be unsafe is if the CPU made two non-atomic * 8-bit accesses to obtain the 16-bit head index. */ tail = dev->recv.tail; if (dev->recv.head != tail) { /* Take the next character from the tail of the buffer */ *buffer++ = dev->recv.buffer[tail]; recvd++; /* Increment the tail index. Most operations are done using the * local variable 'tail' so that the final dev->recv.tail update * is atomic. */ if (++tail >= dev->recv.size) { tail = 0; } dev->recv.tail = tail; } #ifdef CONFIG_DEV_SERIAL_FULLBLOCKS /* No... then we would have to wait to get receive more data. * If the user has specified the O_NONBLOCK option, then just * return what we have. */ else if (filep->f_oflags & O_NONBLOCK) { /* If nothing was transferred, then return the -EAGAIN * error (not zero which means end of file). */ if (recvd < 1) { recvd = -EAGAIN; } break; } #else /* No... the circular buffer is empty. Have we returned anything * to the caller? */ else if (recvd > 0) { /* Yes.. break out of the loop and return the number of bytes * received up to the wait condition. */ break; } /* No... then we would have to wait to get receive some data. * If the user has specified the O_NONBLOCK option, then do not * wait. */ else if (filep->f_oflags & O_NONBLOCK) { /* Break out of the loop returning -EAGAIN */ recvd = -EAGAIN; break; } #endif /* Otherwise we are going to have to wait for data to arrive */ else { /* Disable Rx interrupts and test again... */ uart_disablerxint(dev); /* If the Rx ring buffer still empty? Bytes may have been addded * between the last time that we checked and when we disabled Rx * interrupts. */ if (dev->recv.head == dev->recv.tail) { /* Yes.. the buffer is still empty. Wait for some characters * to be received into the buffer with the RX interrupt re- * enabled. All interrupts are disabled briefly to assure * that the following operations are atomic. */ flags = irqsave(); dev->recvwaiting = true; uart_enablerxint(dev); /* Now wait with the Rx interrupt re-enabled. NuttX will * automatically re-enable global interrupts when this * thread goes to sleep. */ uart_takesem(&dev->recvsem); irqrestore(flags); } else { /* No... the ring buffer is no longer empty. Just re-enable Rx * interrupts and accept the new data on the next time through * the loop. */ uart_enablerxint(dev); } } } uart_givesem(&dev->recv.sem); return recvd; } /************************************************************************************ * Name: uart_ioctl ************************************************************************************/ static int uart_ioctl(FAR struct file *filep, int cmd, unsigned long arg) { FAR struct inode *inode = filep->f_inode; FAR uart_dev_t *dev = inode->i_private; return dev->ops->ioctl(filep, cmd, arg); } /**************************************************************************** * Name: uart_poll ****************************************************************************/ #ifndef CONFIG_DISABLE_POLL int uart_poll(FAR struct file *filep, FAR struct pollfd *fds, bool setup) { FAR struct inode *inode = filep->f_inode; FAR uart_dev_t *dev = inode->i_private; pollevent_t eventset; int ndx; int ret = OK; int i; /* Some sanity checking */ #if CONFIG_DEBUG if (!dev || !fds) { return -ENODEV; } #endif /* Are we setting up the poll? Or tearing it down? */ uart_takesem(&dev->pollsem); if (setup) { /* This is a request to set up the poll. Find an available * slot for the poll structure reference */ for (i = 0; i < CONFIG_SERIAL_NPOLLWAITERS; i++) { /* Find an available slot */ if (!dev->fds[i]) { /* Bind the poll structure and this slot */ dev->fds[i] = fds; fds->priv = &dev->fds[i]; break; } } if (i >= CONFIG_SERIAL_NPOLLWAITERS) { fds->priv = NULL; ret = -EBUSY; goto errout; } /* Should immediately notify on any of the requested events? * First, check if the xmit buffer is full. */ eventset = 0; uart_takesem(&dev->xmit.sem); ndx = dev->xmit.head + 1; if (ndx >= dev->xmit.size) { ndx = 0; } if (ndx != dev->xmit.tail) { eventset |= POLLOUT; } uart_givesem(&dev->xmit.sem); /* Check if the receive buffer is empty */ uart_takesem(&dev->recv.sem); if (dev->recv.head != dev->recv.tail) { eventset |= POLLIN; } uart_givesem(&dev->recv.sem); if (eventset) { uart_pollnotify(dev, eventset); } } else if (fds->priv) { /* This is a request to tear down the poll. */ struct pollfd **slot = (struct pollfd **)fds->priv; #ifdef CONFIG_DEBUG if (!slot) { ret = -EIO; goto errout; } #endif /* Remove all memory of the poll setup */ *slot = NULL; fds->priv = NULL; } errout: uart_givesem(&dev->pollsem); return ret; } #endif /************************************************************************************ * Name: uart_close * * Description: * This routine is called when the serial port gets closed. * It waits for the last remaining data to be sent. * ************************************************************************************/ static int uart_close(FAR struct file *filep) { FAR struct inode *inode = filep->f_inode; FAR uart_dev_t *dev = inode->i_private; irqstate_t flags; uart_takesem(&dev->closesem); if (dev->open_count > 1) { dev->open_count--; uart_givesem(&dev->closesem); return OK; } /* There are no more references to the port */ dev->open_count = 0; /* Stop accepting input */ uart_disablerxint(dev); /* Now we wait for the transmit buffer to clear */ while (dev->xmit.head != dev->xmit.tail) { #ifndef CONFIG_DISABLE_SIGNALS usleep(HALF_SECOND_USEC); #else up_mdelay(HALF_SECOND_MSEC); #endif } /* And wait for the TX fifo to drain */ while (!uart_txempty(dev)) { #ifndef CONFIG_DISABLE_SIGNALS usleep(HALF_SECOND_USEC); #else up_mdelay(HALF_SECOND_MSEC); #endif } /* Free the IRQ and disable the UART */ flags = irqsave(); /* Disable interrupts */ uart_detach(dev); /* Detach interrupts */ if (!dev->isconsole) /* Check for the serial console UART */ { uart_shutdown(dev); /* Disable the UART */ } irqrestore(flags); uart_givesem(&dev->closesem); return OK; } /************************************************************************************ * Name: uart_open * * Description: * This routine is called whenever a serial port is opened. * ************************************************************************************/ static int uart_open(FAR struct file *filep) { struct inode *inode = filep->f_inode; uart_dev_t *dev = inode->i_private; uint8_t tmp; int ret = OK; /* If the port is the middle of closing, wait until the close is finished */ uart_takesem(&dev->closesem); /* Start up serial port */ /* Increment the count of references to the device. */ tmp = dev->open_count + 1; if (tmp == 0) { /* More than 255 opens; uint8_t overflows to zero */ ret = -EMFILE; goto errout_with_sem; } /* Check if this is the first time that the driver has been opened. */ if (tmp == 1) { irqstate_t flags = irqsave(); /* If this is the console, then the UART has already been initialized. */ if (!dev->isconsole) { /* Perform one time hardware initialization */ ret = uart_setup(dev); if (ret < 0) { irqrestore(flags); goto errout_with_sem; } } /* In any event, we do have to configure for interrupt driven mode of * operation. Attach the hardware IRQ(s). Hmm.. should shutdown() the * the device in the rare case that uart_attach() fails, tmp==1, and * this is not the console. */ ret = uart_attach(dev); if (ret < 0) { uart_shutdown(dev); irqrestore(flags); goto errout_with_sem; } /* Mark the io buffers empty */ dev->xmit.head = 0; dev->xmit.tail = 0; dev->recv.head = 0; dev->recv.tail = 0; /* Enable the RX interrupt */ uart_enablerxint(dev); irqrestore(flags); } /* Save the new open count on success */ dev->open_count = tmp; errout_with_sem: uart_givesem(&dev->closesem); return ret; } /************************************************************************************ * Public Functions ************************************************************************************/ /************************************************************************************ * Name: uart_register * * Description: * Register serial console and serial ports. * ************************************************************************************/ int uart_register(FAR const char *path, FAR uart_dev_t *dev) { sem_init(&dev->xmit.sem, 0, 1); sem_init(&dev->recv.sem, 0, 1); sem_init(&dev->closesem, 0, 1); sem_init(&dev->xmitsem, 0, 0); sem_init(&dev->recvsem, 0, 0); #ifndef CONFIG_DISABLE_POLL sem_init(&dev->pollsem, 0, 1); #endif dbg("Registering %s\n", path); return register_driver(path, &g_serialops, 0666, dev); } /************************************************************************************ * Name: uart_datareceived * * Description: * This function is called from uart_recvchars when new serial data is place in * the driver's circular buffer. This function will wake-up any stalled read() * operations that are waiting for incoming data. * ************************************************************************************/ void uart_datareceived(FAR uart_dev_t *dev) { /* Awaken any awaiting read() operations */ if (dev->recvwaiting) { dev->recvwaiting = false; (void)sem_post(&dev->recvsem); } /* Notify all poll/select waiters that they can read from the recv buffer */ uart_pollnotify(dev, POLLIN); } /************************************************************************************ * Name: uart_datasent * * Description: * This function is called from uart_xmitchars after serial data has been sent, * freeing up some space in the driver's circular buffer. This function will * wake-up any stalled write() operations that was waiting for space to buffer * outgoing data. * ************************************************************************************/ void uart_datasent(FAR uart_dev_t *dev) { if (dev->xmitwaiting) { dev->xmitwaiting = false; (void)sem_post(&dev->xmitsem); } /* Notify all poll/select waiters that they can write to xmit buffer */ uart_pollnotify(dev, POLLOUT); }