/**************************************************************************** * arch/mips/include/pic32mx/cp0.h * * Copyright (C) 2011 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H #define __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include /**************************************************************************** * Pre-Processor Definitions ****************************************************************************/ /* CP0 Register Addresses ***************************************************/ #ifdef __ASSEMBLY__ # define PIC32MX_CP0_HWRENA $7,0 /* Enables access via RDHWR hardware registers */ # define PIC32MX_CP0_BADVADDR $8,0 /* Address of most recent exception */ # define PIC32MX_CP0_COUNT $9,0 /* Processor cycle count */ # define PIC32MX_CP0_COMPARE $11,0 /* Timer interrupt control */ # define PIC32MX_CP0_STATUS $12,0 /* Processor status and control */ # define PIC32MX_CP0_INTCTL $12,1 /* Interrupt system status and control */ # define PIC32MX_CP0_SRSCTL $12,2 /* Shadow register set status and control */ # define PIC32MX_CP0_SRSMAP $12,3 /* Maps from vectored interrupt to a shadow set */ # define PIC32MX_CP0_CAUSE $13,0 /* Cause of last general exception */ # define PIC32MX_CP0_EPC $14,0 /* Program counter at last exception */ # define PIC32MX_CP0_PRID $15,0 /* Processor identification and revision */ # define PIC32MX_CP0_EBASE $15,1 /* Exception vector base register */ # define PIC32MX_CP0_CONFIG $16,0 /* Configuration register */ # define PIC32MX_CP0_CONFIG1 $16,1 /* Configuration register 1 */ # define PIC32MX_CP0_CONFIG2 $16,2 /* Configuration register 3 */ # define PIC32MX_CP0_CONFIG3 $16,3 /* Configuration register 3 */ #endif /* CP0 Registers ************************************************************/ /* Register Number: 0-6: Reserved * Compliance Level: Required for TLB-based MMU; Optional otherwise. */ /* Register Number: 7 Sel: 0 Name: HWREna * Function: Enables access via the RDHWR instruction to selected hardware * registers in non-privileged mode. * Compliance Level: (Reserved for future extensions) */ #define CP0_HWRENA_SHIFT (0) /* Bits 0-3: Enable access to a hardware resource */ #define CP0_HWRENA_MASK (15 << CP0_HWRENA_SHIFT) # define CP0_HWRENA_BIT0 (1 << CP0_HWRENA_SHIFT) # define CP0_HWRENA_BIT1 (2 << CP0_HWRENA_SHIFT) # define CP0_HWRENA_BIT2 (4 << CP0_HWRENA_SHIFT) # define CP0_HWRENA_BIT3 (8 << CP0_HWRENA_SHIFT) /* Register Number: 8 Sel: 0 Name: BadVAddr * Function: Reports the address for the most recent address-related * exception * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * * Register Number: 9 Sel: 0 Name: Count * Function: Processor cycle count * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * * Register Number: 10 Reserved. * Compliance Level: Required for TLB-based MMU; Optional otherwise. * * Register Number: 11 Sel: 0 Name: Compare * Function: Timer interrupt control * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h */ /* Register Number: 12 Sel: 0 Name: Status * Function: Processor status and control * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * NOTES: * 1. The following are reserved bits in the PIC32: * CP0_STATUS_UX Bit 5: Enables 64-bit user address space (Not MIPS32) * CP0_STATUS_SX Bit 6: Enables 64-bit supervisor address space (Not MIPS32) * CP0_STATUS_KX Bit 7: Enables 64-bit kernel address space (Not MIPS32) * CP0_STATUS_IMPL Bits 16-17: Implementation dependent * CP0_STATUS_TS Bit 21: TLB detected match on multiple entries * CP0_STATUS_PX Bit 23: Enables 64-bit operations (Not MIPS32) * CP0_STATUS_MX Bit 24: Enables MDMX™ (Not MIPS32) */ #undef CP0_STATUS_UX #undef CP0_STATUS_SX #undef CP0_STATUS_KX #undef CP0_STATUS_IMPL #undef CP0_STATUS_IMPL_SHIFT #undef CP0_STATUS_IMPL_MASK #undef CP0_STATUS_TS #undef CP0_STATUS_PX #undef CP0_STATUS_MX /* 2. The following field is of a different width. Apparently, it * excludes the software interrupt bits. * * CP0_STATUS_IM Bits 8-15: Interrupt Mask * Vs. * CP0_STATUS_IPL Bits 10-15: Interrupt priority level * Bitss 8-9 reserved */ #define CP0_STATUS_IPL_SHIFT (10) /* Bits 10-15: Interrupt priority level */ #define CP0_STATUS_IPL_MASK (0x3f << CP0_STATUS_IPL_SHIFT) /* 3. Supervisor mode not supported * CP0_STATUS_KSU Bits 3-4: Operating mode (with supervisor mode) */ #undef CP0_STATUS_KSU_SHIFT #undef CP0_STATUS_KSU_MASK #undef CP0_STATUS_KSU_KERNEL #undef CP0_STATUS_KSU_SUPER #undef CP0_STATUS_KSU_USER /* Register Number: 12 Sel: 1 Name: IntCtl */ #define CP0_INTCTL_VS_SHIFT (5) /* Bits 5-9: Vector spacing bits */ #define CP0_INTCTL_VS_MASK (0x1f << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_0BYTES (0x00 << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_32BYTES (0x01 << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_64BYTES (0x02 << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_128BYTES (0x04 << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_256BYTES (0x08 << CP0_INTCTL_VS_SHIFT) # define CP0_INTCTL_VS_512BYTES (0x10 << CP0_INTCTL_VS_SHIFT) /* Register Number: 12 Sel: 2 Name: SRSCtl */ #define CP0_SRSCTL_CSS_SHIFT (0) /* Bits 0-3: Current shadow bit set */ #define CP0_SRSCTL_CSS_MASK (15 << CP0_SRSCTL_CSS_SHIFT) #define CP0_SRSCTL_PSS_SHIFT (6) /* Bits 6-9: Previous shadow set */ #define CP0_SRSCTL_PSS_MASK (15 << CP0_SRSCTL_PSS_SHIFT) #define CP0_SRSCTL_ESS_SHIFT (12) /* Bits 12-15: Exception shadow sets */ #define CP0_SRSCTL_ESS_MASK (15 << CP0_SRSCTL_ESS_SHIFT) #define CP0_SRSCTL_EICSS_SHIFT (18) /* Bits 18-21: External interrupt controller shadow sets */ #define CP0_SRSCTL_EICSS_MASK (15 << CP0_SRSCTL_EICSS_SHIFT) #define CP0_SRSCTL_HSS_SHIFT (26) /* Bits 26-29: High shadow sets */ #define CP0_SRSCTL_HSS_MASK (15 << CP0_SRSCTL_HSS_SHIFT) # define CP0_SRSCTL_HSS_1SET (0 << CP0_SRSCTL_HSS_SHIFT) /* One shadow set (normal GPR set) */ # define CP0_SRSCTL_HSS_2SETS (1 << CP0_SRSCTL_HSS_SHIFT) /* Two shadow sets */ # define CP0_SRSCTL_HSS_4SETS (3 << CP0_SRSCTL_HSS_SHIFT) /* Four shadow sets */ /* Register Number: 12 Sel: 3 Name: SRSMap */ #define CP0_SRSMAP_SSV0_SHIFT (0) /* Bits 0-3: Shadow set vector 0 */ #define CP0_SRSMAP_SSV0_MASK (15 << CP0_SRSMAP_SSV0_SHIFT) #define CP0_SRSMAP_SSV1_SHIFT (4) /* Bits 4-7: Shadow set vector 1 */ #define CP0_SRSMAP_SSV1_MASK (15 << CP0_SRSMAP_SSV1_SHIFT) #define CP0_SRSMAP_SSV2_SHIFT (8) /* Bits 8-11: Shadow set vector 2 */ #define CP0_SRSMAP_SSV2_MASK (15 << CP0_SRSMAP_SSV2_SHIFT) #define CP0_SRSMAP_SSV3_SHIFT (12) /* Bits 12-15: Shadow set vector 3 */ #define CP0_SRSMAP_SSV3_MASK (15 << CP0_SRSMAP_SSV3_SHIFT) #define CP0_SRSMAP_SSV4_SHIFT (16) /* Bits 16-19: Shadow set vector 4 */ #define CP0_SRSMAP_SSV4_MASK (15 << CP0_SRSMAP_SSV4_SHIFT) #define CP0_SRSMAP_SSV5_SHIFT (20) /* Bits 20-23: Shadow set vector 5 */ #define CP0_SRSMAP_SSV5_MASK (15 << CP0_SRSMAP_SSV5_SHIFT) #define CP0_SRSMAP_SSV6_SHIFT (24) /* Bits 24-27: Shadow set vector 6 */ #define CP0_SRSMAP_SSV6_MASK (15 << CP0_SRSMAP_SSV6_SHIFT) #define CP0_SRSMAP_SSV7_SHIFT (28) /* Bits 28-31: Shadow set vector 7 */ #define CP0_SRSMAP_SSV7_MASK (15 << CP0_SRSMAP_SSV7_SHIFT) /* Register Number: 13 Sel: 0 Name: Cause * Function: Cause of last general exception * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * NOTES: The following bits are added in the PIC32: */ #define CP0_CAUSE_R (1 << 26) /* Bit 26: R bit */ #define CP0_CAUSE_DC (1 << 27) /* Bit 27: Disable count */ #define CP0_CAUSE_TI (1 << 30) /* Bit 30: Timer interrupt bit *. /* Register Number: 14 Sel: 0 Name: EPC * Function: Program counter at last exception * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h */ /* Register Number: 15 Sel: 0 Name: PRId * Function: Processor identification and revision * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * NOTE: Slightly different bit interpretations of some fields: */ #define CP0_PRID_PATCH_SHIFT (5) /* Bits 0-1: Patch level */ #define CP0_PRID_PATCH_MASK (3 << CP0_PRID_PATCH_SHIFT) #define CP0_PRID_MINOR_SHIFT (2) /* Bits 2-4: Minor revision number */ #define CP0_PRID_MINOR_MASK (7 << CP0_PRID_MINOR_SHIFT) #define CP0_PRID_MAJOR_SHIFT (5) /* Bits 5-7: Major revision number */ #define CP0_PRID_MAJOR_MASK (7 << CP0_PRID_MAJOR_SHIFT) #undef CP0_PRID_OPTIONS_SHIFT #undef CP0_PRID_OPTIONS_MASK /* Register Number: 15 Sel: 1 Name: EBASE */ #define CP_EBASE_CPUNUM_SHIFT (0) /* Bits 0-9: CPU number */ #define CP_EBASE_CPUNUM_MASK (0x3ff << CP_EBASE_CPUNUM_SHIFT) #define CP_EBASE_SHIFT (12) /* Bits 30-31=10, Bits 12-29: Exception base */ #define CP_EBASE_MASK (0x3ffff << CP_EBASE_SHIFT) /* Register Number: 16 Sel: 0 Name: Config * Function: Configuration register * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * 1. PIC32MX is always little-endian. * 2. Implementation specific bits defined. */ #undef CP0_CONFIG_IMPL_SHIFT #undef CP0_CONFIG_IMPL_MASK #define CP0_CONFIG_K23_SHIFT (0) /* Bits 28-30: KSEG2 and KSEG3 cacheability */ #define CP0_CONFIG_K23_MASK (7 << CP0_CONFIG_K23_SHIFT) # define CP0_CONFIG_K23_UNCACHED (2 << CP0_CONFIG_K23_SHIFT) # define CP0_CONFIG_K23_CACHEABLE (3 << CP0_CONFIG_K23_SHIFT) #define CP0_CONFIG_KU_SHIFT (0) /* Bits 0-2: KUSEG and USEG cacheability */ #define CP0_CONFIG_KU_MASK (7 << CP0_CONFIG_KU_SHIFT) # define CP0_CONFIG_KU_UNCACHED (2 << CP0_CONFIG_KU_SHIFT) # define CP0_CONFIG_KU_CACHEABLE (3 << CP0_CONFIG_KU_SHIFT) #define CP0_CONFIG_UDI (1 << 22) /* Bit 22: User defined bit */ #define CP0_CONFIG_SB (1 << 21) /* Bit 32: Simple BE bus mode bit */ #define CP0_CONFIG_MDU (1 << 20) /* Multipley/Divide unit bit */ #define CP0_CONFIG_DS (1 << 16) /* Dual SRAM bit */ /* Register Number: 16 Sel: 1 Name: Config1 * Function: Configuration register 1 * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * * Register Number: 16 Sel: 2 Name: Config2 * Function: Configuration register 2 * Compliance Level: Optional. * * See arch/mips/include/mips32/cp0.h */ #undef CP0_CONFIG2_TBS_SHIFT #undef CP0_CONFIG2_TBS_MASK /* Register Number: 16 Sel: 3 Name: Config3 * Function: Configuration register 3 * Compliance Level: Optional. * * See arch/mips/include/mips32/cp0.h */ #define CP0_CONFIG3_SP (1 << 4) /* Bit 4: Support page bit */ #define CP0_CONFIG3_VINT (1 << 5) /* Bit 5: Vector interrupt bit */ #define CP0_CONFIG3_VEIC (1 << 6) /* Bit 6: External interrupt controller supported */ /* Register Number: 17-22 Reserved * Compliance Level: Optional. */ /* Register Number: 23 Sel: 0 Name: Debug * Function: EJTAG Debug register * Compliance Level: Optional. */ #define CP0_DEBUG_DSS (1 << 0) /* Bit 0: Debug single-step exception */ #define CP0_DEBUG_DBP (1 << 1) /* Bit 1: Debug software breakpoint exception */ #define CP0_DEBUG_DDBL (1 << 2) /* Bit 2: Debug data break exception on load */ #define CP0_DEBUG_DDBS (1 << 3) /* Bit 3: Debug data break exception on store */ #define CP0_DEBUG_DIB (1 << 4) /* Bit 4: Debug instruction break exception */ #define CP0_DEBUG_DINT (1 << 5) /* Bit 5: Debug interrupt exception */ #define CP0_DEBUG_SST (1 << 8) /* Bit 6: Enable debug single step exception */ #define CP0_DEBUG_NOSST (1 << 9) /* Bit 7: No single step feature available */ #define CP0_DEBUG_DEXCCODE_SHIFT (10) /* Bits 10-14: Cause of latest exception in DEBUG mode */ #define CP0_DEBUG_DEXCCODE_MASK (31 << CP0_DEBUG_DEXCCODE_SHIFT) #define CP0_DEBUG_VER_SHIFT (15) /* Bits 15-17: EJTAG version */ #define CP0_DEBUG_VER_MASK (7 << CP0_DEBUG_VER_SHIFT) #define CP0_DEBUG_DDBLIMPR (1 << 18) /* Bit 18: Imprecise debug data break load instruction */ #define CP0_DEBUG_DDBSIMPR (1 << 19) /* Bit 19: Imprecise debug data break store instruction */ #define CP0_DEBUG_IEXI (1 << 20) /* Bit 20: Imprecise error exception inhibit */ #define CP0_DEBUG_DBUSEP (1 << 21) /* Bit 21: Data access bus error exception pending */ #define CP0_DEBUG_CACHEEP (1 << 22) /* Bit 22: Imprecise cache error exception is pending */ #define CP0_DEBUG_MCHECKP (1 << 23) /* Bit 23: Imprecise machine check exception is pending */ #define CP0_DEBUG_IBUSEP (1 << 24) /* Bit 24: Bus error exception pending */ #define CP0_DEBUG_COUNTDM (1 << 25) /* Bit 25: Count register behavior (1=running) */ #define CP0_DEBUG_HALT (1 << 26) /* Bit 26: Internal system bus clock stopped */ #define CP0_DEBUG_DOZE (1 << 27) /* Bit 27: Processor in low power mode */ #define CP0_DEBUG_LSNM (1 << 28) /* Bit 28: Load/store in DSEG goes to main memory */ #define CP0_DEBUG_NODCR (1 << 29) /* Bit 29: No DSEG preset */ #define CP0_DEBUG_DM (1 << 30) /* Bit 30: Processor is operating in DEBUG mode */ #define CP0_DEBUG_DBD (1 << 31) /* Bit 31: Last debug exception occurred in a dely slot */ /* Register Number: 23 Sel: ? Name: Debug2 * Is this documented anywhere? */ /* Register Number: 24 Sel: 0 Name: DEPC * Function: Program counter at last EJTAG debug exception * Compliance Level: Optional. * * See arch/mips/include/mips32/cp0.h * * Register Number: 25-29 Reserved * Compliance Level: Recommended/Optional. * * Register Number: 30 Sel: 0 Name: ErrorEPC * Function: Program counter at last error * Compliance Level: Required. * * See arch/mips/include/mips32/cp0.h * * Register Number: 31 Sel: 0 Name: DeSAVE * Function: EJTAG debug exception save register * Compliance Level: Optional. * * See arch/mips/include/mips32/cp0.h */ /**************************************************************************** * Public Types ****************************************************************************/ #ifndef __ASSEMBLY__ /**************************************************************************** * Inline Functions ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif #undef EXTERN #ifdef __cplusplus } #endif #endif /* __ASSEMBLY__ */ #endif /* __ARCH_MIPS_INCLUDE_PIC32MX_CP0_H */